skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Fluor Hanford Nuclear Material Stabilization Project Welding Manual

Abstract

The purpose of this section of the welding manual is to: (1) Provide a general description of the major responsibilities of the organizations involved with welding. (2) Provide general guidance concerning the application of codes related to welding. This manual contains requirements for welding for all Fluor Hanford (FH) welding operators working on the W460 Project, in the Plutonium Finishing Plant (PFP) at the U. S. Department of Energy (DOE) Hanford facilities. These procedures and any additional requirements for these joining processes can be used by all FH welding operators that are qualified. The Welding Procedure Specifications (WPS) found in this document were established from Procedure Qualification Records (PQR) qualified by FH specifically for the W460 Project. PQRs are permanent records of the initial testing and qualification program and are used to backup, and support, the WPS. The identification numbers of the supporting PQR(s) are recorded on each WPS. All PQRs are permanently stored under the supervision of the Fluor Hanford Welding Engineer (FHWE). New PQRs and WPSs will continue to be developed as necessary. The qualification of welders, welding operators and welding procedures will be performed for FH under supervision and concurrent of the FHWE. All new welding proceduresmore » to be entered in this manual or welder personnel to be added to the welder qualification database, shall be approved by the FHWE.« less

Authors:
Publication Date:
Research Org.:
FDH (US)
Sponsoring Org.:
USDOE Office of Environmental Management (EM) (US)
OSTI Identifier:
805365
Report Number(s):
HNF-7082, Rev.0
TRN: US0301290
DOE Contract Number:  
AC06-96RL13200
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 20 Oct 2000
Country of Publication:
United States
Language:
English
Subject:
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; 36 MATERIALS SCIENCE; PLUTONIUM; SPECIFICATIONS; STABILIZATION; TESTING; WELDING; MANUALS; RECOMMENDATIONS; NUCLEAR FACILITIES

Citation Formats

BERKEY, J.R.. Fluor Hanford Nuclear Material Stabilization Project Welding Manual. United States: N. p., 2000. Web. doi:10.2172/805365.
BERKEY, J.R.. Fluor Hanford Nuclear Material Stabilization Project Welding Manual. United States. doi:10.2172/805365.
BERKEY, J.R.. Fri . "Fluor Hanford Nuclear Material Stabilization Project Welding Manual". United States. doi:10.2172/805365. https://www.osti.gov/servlets/purl/805365.
@article{osti_805365,
title = {Fluor Hanford Nuclear Material Stabilization Project Welding Manual},
author = {BERKEY, J.R.},
abstractNote = {The purpose of this section of the welding manual is to: (1) Provide a general description of the major responsibilities of the organizations involved with welding. (2) Provide general guidance concerning the application of codes related to welding. This manual contains requirements for welding for all Fluor Hanford (FH) welding operators working on the W460 Project, in the Plutonium Finishing Plant (PFP) at the U. S. Department of Energy (DOE) Hanford facilities. These procedures and any additional requirements for these joining processes can be used by all FH welding operators that are qualified. The Welding Procedure Specifications (WPS) found in this document were established from Procedure Qualification Records (PQR) qualified by FH specifically for the W460 Project. PQRs are permanent records of the initial testing and qualification program and are used to backup, and support, the WPS. The identification numbers of the supporting PQR(s) are recorded on each WPS. All PQRs are permanently stored under the supervision of the Fluor Hanford Welding Engineer (FHWE). New PQRs and WPSs will continue to be developed as necessary. The qualification of welders, welding operators and welding procedures will be performed for FH under supervision and concurrent of the FHWE. All new welding procedures to be entered in this manual or welder personnel to be added to the welder qualification database, shall be approved by the FHWE.},
doi = {10.2172/805365},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Fri Oct 20 00:00:00 EDT 2000},
month = {Fri Oct 20 00:00:00 EDT 2000}
}

Technical Report:

Save / Share: