skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Double Shell Tank (DST) Ventilation System Vapor Sampling and Analysis Plan

Abstract

This sampling and analysis plan (SAP) identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples from the primary ventilation systems of the AN, AP, AW, and AY/AZ tank farms. Sampling will be performed in accordance with Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis (Air DQO) (Mulkey 1999). The sampling will verify if current air emission estimates used in the permit application are correct and provide information for future air permit applications. Vapor samples will be obtained from tank farm ventilation systems, downstream from the tanks and upstream of any filtration. Samples taken in support of the DQO will consist of SUMMA{trademark} canisters, triple sorbent traps (TSTs), sorbent tube trains (STTs), polyurethane foam (PUF) samples. Particulate filter samples and tritium traps will be taken for radiation screening to allow the release of the samples for analysis. The following sections provide the general methodology and procedures to be used in the preparation, retrieval, transport, analysis, and reporting of results from the vapor samples.

Authors:
Publication Date:
Research Org.:
CHG (US)
Sponsoring Org.:
USDOE Office of Environmental Management (EM) (US)
OSTI Identifier:
803949
Report Number(s):
RPP-6264, Rev.0
EDT-628397; TRN: US0300803
DOE Contract Number:  
AC27-99RL14047
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 8 Jun 2000
Country of Publication:
United States
Language:
English
Subject:
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; 11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; SAMPLING; STORAGE FACILITIES; TRITIUM; VENTILATION SYSTEMS; GAS ANALYSIS; PLANNING; HANFORD RESERVATION; RADIOACTIVE WASTE STORAGE; AIR SAMPLERS

Citation Formats

SASAKI, L.M. Double Shell Tank (DST) Ventilation System Vapor Sampling and Analysis Plan. United States: N. p., 2000. Web. doi:10.2172/803949.
SASAKI, L.M. Double Shell Tank (DST) Ventilation System Vapor Sampling and Analysis Plan. United States. doi:10.2172/803949.
SASAKI, L.M. Thu . "Double Shell Tank (DST) Ventilation System Vapor Sampling and Analysis Plan". United States. doi:10.2172/803949. https://www.osti.gov/servlets/purl/803949.
@article{osti_803949,
title = {Double Shell Tank (DST) Ventilation System Vapor Sampling and Analysis Plan},
author = {SASAKI, L.M.},
abstractNote = {This sampling and analysis plan (SAP) identifies characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples from the primary ventilation systems of the AN, AP, AW, and AY/AZ tank farms. Sampling will be performed in accordance with Data Quality Objectives for Regulatory Requirements for Hazardous and Radioactive Air Emissions Sampling and Analysis (Air DQO) (Mulkey 1999). The sampling will verify if current air emission estimates used in the permit application are correct and provide information for future air permit applications. Vapor samples will be obtained from tank farm ventilation systems, downstream from the tanks and upstream of any filtration. Samples taken in support of the DQO will consist of SUMMA{trademark} canisters, triple sorbent traps (TSTs), sorbent tube trains (STTs), polyurethane foam (PUF) samples. Particulate filter samples and tritium traps will be taken for radiation screening to allow the release of the samples for analysis. The following sections provide the general methodology and procedures to be used in the preparation, retrieval, transport, analysis, and reporting of results from the vapor samples.},
doi = {10.2172/803949},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2000},
month = {6}
}