skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Alternatives Generation and Analysis for Heat Removal from High Level Waste Tanks

Abstract

This document addresses the preferred combination of design and operational configurations to provide heat removal from high-level waste tanks during Phase 1 waste feed delivery to prevent the waste temperature from exceeding tank safety requirement limits. An interim decision for the preferred method to remove the heat from the high-level waste tanks during waste feed delivery operations is presented herein.

Authors:
Publication Date:
Research Org.:
NHC (US)
Sponsoring Org.:
USDOE Office of Environmental Management (EM) (US)
OSTI Identifier:
803938
Report Number(s):
RPP-4433, Rev.0
EDT-629063; TRN: US0300735
DOE Contract Number:  
AC27-99RL14047
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 15 Jun 2000
Country of Publication:
United States
Language:
English
Subject:
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; DESIGN; SAFETY ENGINEERING; STORAGE FACILITIES; RADIOACTIVE WASTE STORAGE; HIGH-LEVEL RADIOACTIVE WASTES; TEMPERATURE CONTROL; HEAT TRANSFER; WASTE RETRIEVAL

Citation Formats

WILLIS, W.L. Alternatives Generation and Analysis for Heat Removal from High Level Waste Tanks. United States: N. p., 2000. Web. doi:10.2172/803938.
WILLIS, W.L. Alternatives Generation and Analysis for Heat Removal from High Level Waste Tanks. United States. doi:10.2172/803938.
WILLIS, W.L. Thu . "Alternatives Generation and Analysis for Heat Removal from High Level Waste Tanks". United States. doi:10.2172/803938. https://www.osti.gov/servlets/purl/803938.
@article{osti_803938,
title = {Alternatives Generation and Analysis for Heat Removal from High Level Waste Tanks},
author = {WILLIS, W.L.},
abstractNote = {This document addresses the preferred combination of design and operational configurations to provide heat removal from high-level waste tanks during Phase 1 waste feed delivery to prevent the waste temperature from exceeding tank safety requirement limits. An interim decision for the preferred method to remove the heat from the high-level waste tanks during waste feed delivery operations is presented herein.},
doi = {10.2172/803938},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2000},
month = {6}
}