Beam-Size Measurements on PEP-II Using Synchrotron-Light Interferometry
PEP-II transverse profiles are measured by imaging visible synchrotron light from dipoles in the two rings. The images are broadened by surface errors on the primary extraction mirrors, which have a complex design due to high beam currents. To improve vertical beam-size measurements, we installed a synchrotron-light interferometer, following Mitsuhashi at KEK. In a two-slit interferometer, fine fringes modulate the single-slit pattern from a point source. As the source size increases, the fringe depth decreases, providing a sensitive tool. Because the slits pass light from two stripes along the mirror, we can select the better parts of its surface. By adding a cylindrical lens to image the mirror in the direction perpendicular to the fringes, we can further select short segments of these stripes. In 2000, we put an interferometer on the low-energy ring, at a point 30 m from the BaBar detector, where the beam ellipse is tilted as we compensate for rotation in BaBar's solenoid. Our interferometer turns to measure the beam tilt. More recently we added a second unit for the high-energy ring. All optics are in the PEP tunnel and allow remote adjustment of the focusing, slit width and separation.
- Research Organization:
- SLAC National Accelerator Lab., Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE Office of Energy Research (ER) (US)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 799913
- Report Number(s):
- SLAC-PUB-8867; TRN: US0206156
- Resource Relation:
- Other Information: PBD: 14 Aug 2002
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fringe Pattern of the PEP-II Synchrotron-Light Interferometers
Turn-by-Turn Imaging of the Transverse Beam Profile in PEP-II