skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: 241-AN-B valve pit manifold valves and position indication acceptance test procedure

Abstract

This document describes the method used to test design criteria for gear actuated ball valves installed in 241-AN-B Valve Pit located at 200E Tank Farms. The purpose of this procedure is to demonstrate the following: Equipment is properly installed, labeled, and documented on As-Built drawings; New Manifold Valves in the 241-AN-B Valve Pit are fully operable using the handwheel of the valve operators; New valve position indicators on the valve operators will show correct valve positions; New valve position switches will function properly; and New valve locking devices function properly.

Authors:
Publication Date:
Research Org.:
MAINC (US)
Sponsoring Org.:
ENVIRONMENTAL MANAGEMENT (US)
OSTI Identifier:
797716
Report Number(s):
HNF-4644, Rev.0
TRN: US0204917
DOE Contract Number:  
AC06-96RL13200
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 25 Aug 1999
Country of Publication:
United States
Language:
English
Subject:
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; STORAGE FACILITIES; DESIGN; DISPLACEMENT GAGES; SWITCHES; VALVES; PERFORMANCE TESTING; ACTUATORS; POSITIONING

Citation Formats

VANDYKE, D.W. 241-AN-B valve pit manifold valves and position indication acceptance test procedure. United States: N. p., 1999. Web. doi:10.2172/797716.
VANDYKE, D.W. 241-AN-B valve pit manifold valves and position indication acceptance test procedure. United States. doi:10.2172/797716.
VANDYKE, D.W. Wed . "241-AN-B valve pit manifold valves and position indication acceptance test procedure". United States. doi:10.2172/797716. https://www.osti.gov/servlets/purl/797716.
@article{osti_797716,
title = {241-AN-B valve pit manifold valves and position indication acceptance test procedure},
author = {VANDYKE, D.W.},
abstractNote = {This document describes the method used to test design criteria for gear actuated ball valves installed in 241-AN-B Valve Pit located at 200E Tank Farms. The purpose of this procedure is to demonstrate the following: Equipment is properly installed, labeled, and documented on As-Built drawings; New Manifold Valves in the 241-AN-B Valve Pit are fully operable using the handwheel of the valve operators; New valve position indicators on the valve operators will show correct valve positions; New valve position switches will function properly; and New valve locking devices function properly.},
doi = {10.2172/797716},
journal = {},
number = ,
volume = ,
place = {United States},
year = {1999},
month = {8}
}