skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Determination of ring correction factors for leaded gloves used in grab sampling activities at Hanford tank farms

Abstract

This study evaluates the effectiveness of lead lined gloves in reducing extremity dose from two sources specific to tank waste sampling activities: (1) sludge inside glass sample jars and (2) sludge as thin layer contamination on the exterior surface of sample jars. The response of past and present Hanford Extremity Dosimeters (ring) designs under these conditions is also evaluated.

Authors:
Publication Date:
Research Org.:
HNF Hanford Site (US)
Sponsoring Org.:
US DOE Office of Environmental Management (US)
OSTI Identifier:
782439
Report Number(s):
TWR-4227-REV0
TRN: US0204705
DOE Contract Number:  
AC06-96RL13200
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 24 Jun 1999
Country of Publication:
United States
Language:
English
Subject:
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; 11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; GLOVES; SAMPLING; STORAGE FACILITIES; RADIATION PROTECTION; LEAD; SHIELDING MATERIALS

Citation Formats

RATHBONE, B.A. Determination of ring correction factors for leaded gloves used in grab sampling activities at Hanford tank farms. United States: N. p., 1999. Web. doi:10.2172/782439.
RATHBONE, B.A. Determination of ring correction factors for leaded gloves used in grab sampling activities at Hanford tank farms. United States. doi:10.2172/782439.
RATHBONE, B.A. Thu . "Determination of ring correction factors for leaded gloves used in grab sampling activities at Hanford tank farms". United States. doi:10.2172/782439. https://www.osti.gov/servlets/purl/782439.
@article{osti_782439,
title = {Determination of ring correction factors for leaded gloves used in grab sampling activities at Hanford tank farms},
author = {RATHBONE, B.A.},
abstractNote = {This study evaluates the effectiveness of lead lined gloves in reducing extremity dose from two sources specific to tank waste sampling activities: (1) sludge inside glass sample jars and (2) sludge as thin layer contamination on the exterior surface of sample jars. The response of past and present Hanford Extremity Dosimeters (ring) designs under these conditions is also evaluated.},
doi = {10.2172/782439},
journal = {},
number = ,
volume = ,
place = {United States},
year = {1999},
month = {6}
}