skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Press and Dryer Roll Surfaces and Web Transfer Systems

Abstract

The objective of the project is to provide fundamental knowledge and diagnostic tools needed to design new technologies that will allow ultra high speed web transfer from press rolls and dryer cylinders. From a fundamental standpoint, we expect that roll surface performance depends on the composition of contaminants that deposit on those surfaces during use, as well as the materials and finishing techniques used in manufacturing these surfaces. We need to understand; the contamination process, the influence of contamination on work of adhesion, the roles of surface topology, film splitting, and process conditions on web transfer. The purpose of this quarterly report is to provide an overview of the project including key tasks, schedules for completion of tasks and to document accomplishments.

Authors:
Publication Date:
Research Org.:
Institute of Paper Science and Technology (US)
Sponsoring Org.:
US Department of Energy (US)
OSTI Identifier:
764421
Report Number(s):
DOE/GO/10384-Q
TRN: AH200103%%34
DOE Contract Number:  
FC36-99GO10384
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 1 May 2000
Country of Publication:
United States
Language:
English
Subject:
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION; ADHESION; DESIGN; MANUFACTURING; PERFORMANCE; SCHEDULES; DIAGNOSTIC TECHNIQUES; DRYERS; PRESSES; SURFACE FINISHING; PAPER INDUSTRY

Citation Formats

Patterson, T.F. Press and Dryer Roll Surfaces and Web Transfer Systems. United States: N. p., 2000. Web. doi:10.2172/764421.
Patterson, T.F. Press and Dryer Roll Surfaces and Web Transfer Systems. United States. doi:10.2172/764421.
Patterson, T.F. Mon . "Press and Dryer Roll Surfaces and Web Transfer Systems". United States. doi:10.2172/764421. https://www.osti.gov/servlets/purl/764421.
@article{osti_764421,
title = {Press and Dryer Roll Surfaces and Web Transfer Systems},
author = {Patterson, T.F.},
abstractNote = {The objective of the project is to provide fundamental knowledge and diagnostic tools needed to design new technologies that will allow ultra high speed web transfer from press rolls and dryer cylinders. From a fundamental standpoint, we expect that roll surface performance depends on the composition of contaminants that deposit on those surfaces during use, as well as the materials and finishing techniques used in manufacturing these surfaces. We need to understand; the contamination process, the influence of contamination on work of adhesion, the roles of surface topology, film splitting, and process conditions on web transfer. The purpose of this quarterly report is to provide an overview of the project including key tasks, schedules for completion of tasks and to document accomplishments.},
doi = {10.2172/764421},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2000},
month = {5}
}