Thermal and Cold Neutron Computed Tomography at the Los Alamos Neutron Scattering Center Using an Amorphous Silicon Detector Array
The use of the EG and G-Heimann RTM 128 or dpiX FS20 amorphous silicon (a-Si) detector array for thermal neutron radiography/computed tomography has proven to be a quick and efficient means of producing high quality digital radiographic images. The resolution, although not as good as film, is about 750 pm with the RTM and 127 pm with the dpiX array with a dynamic range in excess of 2,800. In many respects using an amorphous silicon detector is an improvement over other techniques such as imaging with a CCD camera, using a storage phosphor plate or film radiography. Unlike a CCD camera, which is highly susceptible to radiation damage, a-Si detectors can be placed in the beam directly behind the object under examination and do not require any special optics or turning mirrors. The amorphous silicon detector also allows enough data to be acquired to construct a digital image in just a few seconds (minimum gate time 40 ms) whereas film or storage plate exposures can take many minutes and then need to be digitized with a scanner. The flat panel can therefore acquire a complete 3D computed tomography data set in just a few tens of minutes. While a-Si detectors have been proposed for use in imaging neutron beams, this is the first reported implementation of such a detector for neutron imaging.
- Research Organization:
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE Office of Defense Programs (DP) (US)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 759256
- Report Number(s):
- LA-UR-98-4464; TRN: US0004503
- Resource Relation:
- Conference: 1998 QNDE Meeting, Snowbird, UT (US), 07/19/1998--07/24/1998; Other Information: PBD: 19 Jul 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
CoBRA: Cone beam Computed Tomography (CT) reconstruction code in Interactive Data Language (IDL)
AFIP-7 Tomography – 2013 Status Report