Alternative heterojunction partners for CIS-based solar cells: Annual subcontract report, 29 December 1997--28 December 1998
The focus of the Phase 1 effort concerned further development of ZnO buffer layers. This work included further optimization of the metal-organic chemical vapor deposition (MOCVD) growth process and investigations of the interaction of zinc and oxygen with the absorber layers. Although much of the work had been done with Siemens' CIS material prior to this reporting period, a process for growing ZnO buffer layers on Siemens' CIGSS absorber had not been developed. The authors determined that a two-step procedure involving raising the substrate temperature to 250 C in nitrogen and then growing the buffer layer at 100 C works well with CIGSS material. Through collaboration with the Institute of Energy Conversion (IEC), completed cells with efficiencies in the 11% to 12% range were fabricated with the following structure: RF n-ZnO/i-ZnO/CIGSS. Cells with this structure were included as part of the Transient team studies. Cells were subjected to dark storage at 80 C, followed by a light soak at 40 C at IEC. Illuminated I-V curves taken at each stage of the study determined that these cells do not degrade under dark-storage conditions, which had been observed for Siemens cells with CdS buffer layers. To understand the reaction of zinc and oxygen with the absorber layers, secondary ion mass spectroscopy (SIMS) depth concentration profiles were obtained for i-ZnO/CIS structures through collaboration with Angus Rockett at the University of Illinois. SIMS profiles were obtained for ZnO films grown on polycrystalline CIS and epitaxial CIS films grown on GaAs. Comparison of the profiles strongly suggests that zinc and oxygen diffuse into the CIS along grain boundaries during the MOCVD growth process. It is also proposed that excess zinc along grain boundaries may result in the grain boundaries being n-type, which can result in enhanced loss currents. This model is consistent with the apparent requirement that cell structures with MOCVD buffer layers must undergo an aging process in air before efficient cells can be obtained. Future studies will investigate processes that allow the aging step to be eliminated.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC36-99GO10337
- OSTI ID:
- 754633
- Report Number(s):
- NREL/SR-520-27930; TRN: AH200013%%7
- Resource Relation:
- Other Information: PBD: 28 Feb 2000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Alternative buffer layers for CuIn(Ga)Se{sub 2} solar cells
Alternative window schemes for CuInSe{sub 2}-based solar cells. Annual report, 1 November 1995--31 October 1996
Related Subjects
36 MATERIALS SCIENCE
COPPER SELENIDE SOLAR CELLS
INDIUM SELENIDE SOLAR CELLS
HETEROJUNCTIONS
ZINC OXIDES
CHEMICAL VAPOR DEPOSITION
SOLAR ABSORBERS
FABRICATION
PERFORMANCE
STORAGE
GRAIN BOUNDARIES
PHOTOVOLTAICS
CIS-BASED SOLAR CELLS
PROCESS DEVELOPMENT
TRANSIENT EFFECTS
INTERDIFFUSION
BUFFER LAYERS
MOCVD