Considerations in the selection of a high-level waste canister. [For use in solidifying waste, transporting it, and permanent disposal]

Technical Report · Wed Sep 29 00:00:00 EDT 1976

DOI:https://doi.org/10.2172/7336444· OSTI ID:7336444

Turner, D W

The design of the high-level waste (HLW) canister is highly significant in all phases of the high-level waste management system including solidification of the waste at the reprocessor, transportation, and permanent disposal at the federal repository. The purpose of this preliminary study is to identify these considerations and interactions, to provide background data for a detailed study which will evaluate these interactions, and to form the basis for the selection of specific design parameters for the canister. Preliminary estimates of the ranges of HLW canister constraints are summarized. Short-cooled wastes or calcination lead to canister sizes on the order of 6 to 16 inches. The in-can melter (ICM) might be limited to canisters in the range of 12 to 18 inches due to the weight of the glass, but this also depends on the length of the canister. Large diameter cans require more heating of the ICM to melt the waste and glass frit in the center of the canister, and this could lead to a diameter limit for the ICM. The drill used for emplacement holes in the repository may limit the maximum canister diameter in the range of 20 to 24 inches, depending on the retrievability concept chosen and the clearances required. The largest size canister a truck cask could handle is about 15 feet long by 24 inches in diameter. The minimum size canister required for disposing of unprocessedspent fuel would be 15 feet long by 12 inches in diameter. The room height in the repository might limit the canister length to a range of 12 to 15 feet, depending on the amount of end shielding and handling clearances necessary. In summary, a first look at the potential canister envelope indicates a range of 6 to 24 inches in diameter and 8 to 15 feet in length.

• Research Organization: Oak Ridge Gaseous Diffusion Plant, Tenn. (USA)
• DOE Contract Number: W-7405-ENG-26
• OSTI ID: 7336444
• Report Number(s): K-OP-217; TRN: 76-022838
• Country of Publication: United States
• Language: English

Related Subjects

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
CASKS
DESIGN
RADIOACTIVE WASTE DISPOSAL
RADIOACTIVE WASTE PROCESSING
RADIOACTIVE WASTES
SOLIDIFICATION
TRANSPORT
CONTAINERS
MANAGEMENT
PHASE TRANSFORMATIONS
PROCESSING
RADIOACTIVE MATERIALS
WASTE DISPOSAL
WASTE MANAGEMENT
WASTE PROCESSING
WASTES
052001* - Nuclear Fuels- Waste Processing
052002 - Nuclear Fuels- Waste Disposal & Storage
050900 - Nuclear Fuels- Transport
Handling
& Storage