skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Effects of design and operating variables on NO/sub x/ from coal-fired furnaces. Phase II. Final report

Technical Report ·
OSTI ID:7295357

Results are presented of an investigation of combustion modification techniques for controlling NOx emissions that have application to pulverized coal-fired utility boilers. The techniques, studied on a 5 million Btu/hr single-burner pilot unit, included: excess air, air preheat, firing rate, flue gas recirculation, staged, combustion, quench, and swirl. Tests conducted with a Colorado coal showed that NOx reduction of up to 65 percent was possible by using staged combustion or by lowering excess air levels from 30 to zero percent. Flue gas recirculation yielded only moderate NOx reductions for coal. For existing units, control of excess air appears to be the simplest method for NOx reduction. Where possible, staged combustion could be retrofitted on existing units to achieve further NOx reductions. For new units, staged combustion combined with low excess air firing appears to be the most promising method for NOx control. (GRA)

Research Organization:
Babcock and Wilcox Co., Lynchburg, Va. (USA). Research and Development Div.
DOE Contract Number:
EPA-68-02-0634
OSTI ID:
7295357
Report Number(s):
PB-241283
Resource Relation:
Other Information: See also PB--229986
Country of Publication:
United States
Language:
English