skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: High performance solid oxide fuel cell cathode fabricated by electrochemical vapor deposition

Journal Article · · Journal of the Electrochemical Society; (United States)
DOI:https://doi.org/10.1149/1.2055028· OSTI ID:7186588

La(Sr)MnO[sub 3] cathodes have been investigated as high temperature oxygen reduction electrodes in the solid oxide fuel cells (SOFCs). The cathodes consist of 10 mole percent of yttria stabilized zirconia (YSZ) thin film electrolyte layer deposited on a porous La[sub 0.81]Sr[sub 0.09]MnO[sub 3] tube using the electrochemical vapor deposition method. The La(Sr)MnO[sub 3]/YSZ cathodes have different electrochemical properties from those fabricated with the sintering method. The cathode polarization was about 1 mV at a current density of 1.5 A/cm[sup 2] in oxygen at 1,000 C. This type of cathode has an extremely large phase boundary and large interfacial capacitance (more than 1 F/cm[sup 2]) which is approximately proportional to the oxygen partial pressure.

OSTI ID:
7186588
Journal Information:
Journal of the Electrochemical Society; (United States), Vol. 141:7; ISSN 0013-4651
Country of Publication:
United States
Language:
English

Similar Records

Composite Cathode for High-Power Density Solid Oxide Fuel Cells
Technical Report · Sat Jan 31 00:00:00 EST 2004 · OSTI ID:7186588

Preparation of perovskite-type La{sub 1{minus}x}Sr{sub x}MnO{sub 3} films by vapor-phase processes and their electrochemical properties
Journal Article · Tue Apr 01 00:00:00 EST 1997 · Journal of the Electrochemical Society · OSTI ID:7186588

Improvement of a single-chamber solid-oxide fuel cell and evaluation of new cell designs
Journal Article · Sat Apr 01 00:00:00 EST 2000 · Journal of the Electrochemical Society · OSTI ID:7186588