Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection

doi:https://doi.org/10.1080/10826079408016161

Title: Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection

Full Record
Other Related Research

Abstract

The separation of anions was performed by capillary zone electrophoresis with indirect UV detection. Optimum conditions for the separation of 12 anions, including the concentration of electroosmotic flow modifier, the concentration of the UV absorbing component and the pH etc. were obtained. This method was applied for the determination of anions in different water samples. The relative standard deviations for the analysis of anions were in the range of 1.2 to 6.9 percent. The detection limits were from 0.12 to 0.84 ppm for the 12 anions.

Authors:

Li, K; Li, S F.Y. ^[1]

National Univ. of Singapore (Singapore)

Publication Date:: 1994-01-01

OSTI Identifier:: 7080778

Resource Type:: Journal Article

Journal Name:: Journal of Liquid Chromatography; (United States)

Additional Journal Information:: Journal Volume: 17:18; Journal ID: ISSN 0148-3919

Country of Publication:: United States

Language:: English

Subject:: 37 INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; ANIONS; ELECTROPHORESIS; AQUEOUS SOLUTIONS; SEPARATION PROCESSES; ULTRAVIOLET RADIATION; CHARGED PARTICLES; DISPERSIONS; ELECTROMAGNETIC RADIATION; IONS; MIXTURES; RADIATIONS; SOLUTIONS; 400105* - Separation Procedures

Citation Formats


                    Li, K, and Li, S F.Y. Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection.  United States: N. p., 1994. 
        Web.  doi:10.1080/10826079408016161.

Copy to clipboard


                    Li, K, & Li, S F.Y. Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection.  United States.  https://doi.org/10.1080/10826079408016161

Copy to clipboard


                    Li, K, and Li, S F.Y. Sat .  
        "Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection".  United States.  https://doi.org/10.1080/10826079408016161.

Copy to clipboard


                    
@article{osti_7080778,

  title        = {Determination of anions in water samples by capillary zone electrophoresis with indirect UV detection},

  author       = {Li, K and Li, S F.Y.},

  abstractNote = {The separation of anions was performed by capillary zone electrophoresis with indirect UV detection. Optimum conditions for the separation of 12 anions, including the concentration of electroosmotic flow modifier, the concentration of the UV absorbing component and the pH etc. were obtained. This method was applied for the determination of anions in different water samples. The relative standard deviations for the analysis of anions were in the range of 1.2 to 6.9 percent. The detection limits were from 0.12 to 0.84 ppm for the 12 anions.},

  doi          = {10.1080/10826079408016161},

  url          = {https://www.osti.gov/biblio/7080778},
  journal      = {Journal of Liquid Chromatography; (United States)},

  issn         = {0148-3919},

  number       = ,

  volume       = 17:18,

  place        = {United States},

  year         = {1994},

  month        = {1}

}

Copy to clipboard

Journal Article:

https://doi.org/10.1080/10826079408016161

Other availability

Find in Google Scholar

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Characterization and quantification in capillary zone electrophoresis using direct and indirect detection

Conference Chiang, Hui-Ti ; Church, W H

Capillary zone electrophoresis has become a major separation technique for the analysis of small volumes of materials and it is featured with the advantages of high efficiency, simplicity and rapidity. The purpose of this study was to characterize the performance of a capillary electrophoresis system in regards to the separation efficiency and quantitative capacity. Three sample introduction techniques--electromigration, gravity and pressure injection modes--were evaluated utilizing two different sample-buffer systems. Analytes phenol, benzoic acid and 2,4-dihydroxybenzoic acid were separated underpositive polarity voltage using a borate buffet and monitored with direct UV absorption detection. Mixtures of myo-inositol 2-monophosphate, myo-inositol 1,4,5-trisphosphate, and myo-inositolmore »« less
Indirect fluorescence detection of native amino acids in capillary zone electrophoresis

Journal Article Kuhr, W G ; Yeung, E S - Anal. Chem.; (United States)

Amino acids are but one of several important classes of small chemical compounds in biological chemistry that have an inherent lack of analytically useful physical properties. Amino acids, peptides, fatty acids, sugars, many mono-, di-, and tricarboxylic acids, and phosphorylated intermediates in glycolysis and metabolism show little, if any, UV or visible absorption, fluorescence, or electrochemical activity. As the emphasis of biochemical research shifts to smaller samples where, for example, picomolar quantities of amino acids are analyzed in gas phase protein sequencing or in microliter samples of the extracellular fluid of the mammalian brain, the analytical problem becomes even moremore »« less
https://doi.org/10.1021/ac00168a038
Capillary electrophoresis separation of neutral organic compounds, pharmaceutical drugs, proteins and peptides, enantiomers, and anions

Thesis/Dissertation Ding, Wei -Liang

Addition of a novel anionic surfactant, namely lauryl polyoxyethylene sulfate, to an aqueous-acetonitrile electrolyte makes it possible to separate nonionic organic compounds by capillary electrophoresis. Separation is based on differences in the association between analytes and the surfactant. Highly hydrophobic compounds such as polyaromatic hydrocarbons are well separated by this new surfactant. Migration times of analytes can be readily changed over an unusually large range by varying the additive concentration and the proportion of acetonitrile in the electrolyte. Several examples are given, including the separation of four methylbenz[a]anthracene isomers and the separation of normal and deuterated acetophenone. The effect ofmore »« less
https://doi.org/10.2172/350830

Full Text Available
Optimization of sensitivity and separation in capillary zone electrophoresis with indirect fluorescence detection

Journal Article Kuhr, W G ; Yeung, E S - Anal. Chem.; (United States)

Laser-induced indirect fluorescence detection can be used a general detector in capillary zone electrophoresis. Indirect fluorescence detection, where a fluorophore is used as the principal component of the electrophoretic buffer, allows the visualization of nonfluorescing ions through charge displacement of the fluorophore. Stabilization of laser power improves the dynamic reserve to 10/sup 3/ without the complication of double-beam correction techniques. A modification of the CZE power supply allows the use of dilute solutions and narrow bore capillary tubing (< 15 ..mu..m i.d.). The stability of the background fluorescence is improved by silylation of the fused silica capillary. These modifications improvemore »« less
https://doi.org/10.1021/ac00174a021
Application of capillary electrophoresis to anion speciation in soil water extracts: 2. Arsenic

Journal Article Naidu, R ; Smith, J ; McLaren, R G ; ... - Soil Science Society of America Journal

A method has been developed for the speciation of arsenic (AsO{sub 2}{sup {minus}}, AsO{sub 4}{sup 3{minus}}, and dimethylarsinic [DMA]) in natural soil solutions from contaminated sites in Australia. The separation of these anions was achieved by capillary zone electrophoresis (CZE) using a fused silica capillary with a basic chromate buffer and on-column indirect UV detection at 254 nm. Method parameters, such as electrolyte pH, run voltage, and capillary temperature were studied in order to establish suitable analytical conditions. The ideal separation for As(III) and DMA was achieved with a buffer pH of 8.0, a run voltage of 25 kV, andmore »« less
https://doi.org/10.2136/sssaj2000.641122x

Similar Records