skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of microstructure and texture during rolling of single-phase and two-phase cube-oriented Al-Cu single crystals

Abstract

With regard to the texture control in commercial Al-sheet products, the evolution of the cube-orientation (001)[100] during deformation and subsequent recrystallization is of particular interest, because this orientation is known to strongly affect sheet formability and mechanical properties. The deformation behavior of two-phase Al-alloys is known to be strongly affected by the presence of second-phase particles. It was the aim of the present study to attain insight into the influence of particles on the evolution of microstructure and texture during rolling of cube-oriented single crystals. Particular emphasis was put on the correlation of the local orientations in the deformation zones around the particles with the matrix orientation. Complementary work on the influence of particles on the microstructure and texture of single crystals with stable rolling texture orientations will be described in a separate paper.

Authors:
 [1]; ;  [2]
  1. Los Alamos National Lab., NM (United States). Center for Materials Science
  2. RWTH Aachen (Germany). Institut fuer Metallkunde und Metallphysik
Publication Date:
Sponsoring Org.:
USDOE, Washington, DC (United States)
OSTI Identifier:
691333
Resource Type:
Journal Article
Journal Name:
Scripta Materialia
Additional Journal Information:
Journal Volume: 41; Journal Issue: 5; Other Information: PBD: 6 Aug 1999
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; ROLLING; MICROSTRUCTURE; TEXTURE; ALUMINIUM ALLOYS; COPPER ALLOYS; MONOCRYSTALS; PARTICULATES; ORIENTATION; DEFORMATION

Citation Formats

Engler, O., Kong, X.W., and Luecke, K. Development of microstructure and texture during rolling of single-phase and two-phase cube-oriented Al-Cu single crystals. United States: N. p., 1999. Web. doi:10.1016/S1359-6462(99)00180-3.
Engler, O., Kong, X.W., & Luecke, K. Development of microstructure and texture during rolling of single-phase and two-phase cube-oriented Al-Cu single crystals. United States. doi:10.1016/S1359-6462(99)00180-3.
Engler, O., Kong, X.W., and Luecke, K. Fri . "Development of microstructure and texture during rolling of single-phase and two-phase cube-oriented Al-Cu single crystals". United States. doi:10.1016/S1359-6462(99)00180-3.
@article{osti_691333,
title = {Development of microstructure and texture during rolling of single-phase and two-phase cube-oriented Al-Cu single crystals},
author = {Engler, O. and Kong, X.W. and Luecke, K.},
abstractNote = {With regard to the texture control in commercial Al-sheet products, the evolution of the cube-orientation (001)[100] during deformation and subsequent recrystallization is of particular interest, because this orientation is known to strongly affect sheet formability and mechanical properties. The deformation behavior of two-phase Al-alloys is known to be strongly affected by the presence of second-phase particles. It was the aim of the present study to attain insight into the influence of particles on the evolution of microstructure and texture during rolling of cube-oriented single crystals. Particular emphasis was put on the correlation of the local orientations in the deformation zones around the particles with the matrix orientation. Complementary work on the influence of particles on the microstructure and texture of single crystals with stable rolling texture orientations will be described in a separate paper.},
doi = {10.1016/S1359-6462(99)00180-3},
journal = {Scripta Materialia},
number = 5,
volume = 41,
place = {United States},
year = {1999},
month = {8}
}