Photovoltaic module design, qualification, and testing specification. Low-Cost Solar Array Project
This specification establishes minimum design, qualification and acceptance requirements for terrestrial solar cell modules suitable for incorporation in photovoltaic array applications in the 20kW to 500kW range, such as defined by Department of Energy PRDA EM-D-04-0038. Both mandatory and recommended requirement levels for selected performance criteria have been specified for modules within these arrays. As applicable, the manufacturer/contractor shall be responsible for generation and selection of appropriate design or test levels within the scope of these criteria. Specification of any additional requirements as necessary to satisfy the particular array or system application shall be the responsibility of the manufacturer/contractor. Environmental requirements imposed by this specification are considered to be the minimum level acceptable to DOE. Test procedures are detailed.
- Research Organization:
- California Institute of Technology (CalTech), Pasadena, CA (United States). Jet Propulsion Lab. (JPL)
- DOE Contract Number:
- EX-76-A-29-1012
- OSTI ID:
- 6866844
- Report Number(s):
- DOE/JPL/1012-7
- Country of Publication:
- United States
- Language:
- English
Similar Records
Block IV solar cell module design and test specification for residential applications
Environmental testing of Block III solar cell modules. Part I. Qualification testing of standard production modules
Related Subjects
SOLAR CELL ARRAYS
PERFORMANCE TESTING
SPECIFICATIONS
DESIGN
ELECTRICAL PROPERTIES
HAIL
HUMIDITY
MECHANICAL TESTS
PERFORMANCE
POWER RANGE 10-100 KW
POWER RANGE 100-1000 KW
QUALITY CONTROL
THERMAL CYCLING
ATMOSPHERIC PRECIPITATIONS
CONTROL
MATERIALS TESTING
PHYSICAL PROPERTIES
TESTING
140501* - Solar Energy Conversion- Photovoltaic Conversion