skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Test plan: Brine inflow and related tests in the brine inflow room (Room Q) of the Waste Isolation Pilot Plant (WIPP)

Technical Report ·
OSTI ID:6863201

The current model for brine inflow to Waste Isolation Pilot Plant (WIPP) excavations is consistent with the body of existing data for brine accumulations in WIPP underground test boreholes. Values for the model parameters are also consistent with independent measurements of brine and host rock salt properties. Experiments to provide additional tests of the assumptions and parameters in the model have been proposed, and the NAS WIPP Panel has strongly encouraged these tests. The Panel particularly urged a test of brine inflow into a relatively large room with a curved vertical cross-section, arguing that the curvature may minimize loss of inflowing brine to separations or cracks that are known to develop below the flat floors of existing rectangular rooms. The brine inflow room in this test plan responds to the urging of theWIPP panel. This test plan is intended as a working document. It is a plan for measurements of brine inflow, pore pressure, humidity, gas inflow, closure, disturbed rock zone (DRZ) characteristics, and other pre- and post-test analyses in Room Q of the Waste Isolation Pilot Plant (WIPP) experimental area.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE; USDOE, Washington, DC (United States)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
6863201
Report Number(s):
DOE/DP/00789-T286; ON: DE93012217
Country of Publication:
United States
Language:
English