Charpy impact test results for low-activation ferritic alloys

Cannon, N. S.; Hu, W. L.; Gelles, D. S.

doi:10.2172/6806112

Title: Charpy impact test results for low-activation ferritic alloys

Full Record
Other Related Research

Abstract

The objective of this work is to evaluate the shift of the ductile to brittle transition temperature (DBTT) and the reduction of the upper shelf energy (USE) due to neutron irradiation of low activation ferritic alloys. Six low activation ferritic alloys have been tested following irradiation at 365/sup 0/C to 10 dpa and compared with control specimens in order to assess the effect of irradiation on Charpy impact properties.

Authors:: Cannon, N. S.; Hu, W. L.; Gelles, D. S.

Publication Date:: Fri May 01 00:00:00 EDT 1987

Research Org.:: Hanford Engineering Development Lab., Richland, WA (United States)

OSTI Identifier:: 6806112

Report Number(s):: HEDL-7659
ON: DE87009523

DOE Contract Number:: AC06-76FF02170

Resource Type:: Technical Report

Resource Relation:: Other Information: Portions of this document are illegible in microfiche products

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; IRON ALLOYS; CHARPY TEST; DUCTILE-BRITTLE TRANSITIONS; EXPERIMENTAL DATA; FFTF REACTOR; IRRADIATION; NEUTRON FLUENCE; TUNGSTEN; VANADIUM; ALLOYS; DATA; DESTRUCTIVE TESTING; ELEMENTS; EPITHERMAL REACTORS; FAST REACTORS; IMPACT TESTS; INFORMATION; LIQUID METAL COOLED REACTORS; MATERIALS TESTING; MECHANICAL TESTS; METALS; NUMERICAL DATA; REACTORS; RESEARCH AND TEST REACTORS; RESEARCH REACTORS; SODIUM COOLED REACTORS; TEST REACTORS; TESTING; TRANSITION ELEMENTS; 360106* - Metals & Alloys- Radiation Effects

Citation Formats


                    Cannon, N. S., Hu, W. L., and Gelles, D. S. Charpy impact test results for low-activation ferritic alloys.  United States: N. p., 1987. 
        Web.  doi:10.2172/6806112.

Copy to clipboard


                    Cannon, N. S., Hu, W. L., & Gelles, D. S. Charpy impact test results for low-activation ferritic alloys.  United States.  https://doi.org/10.2172/6806112

Copy to clipboard


                    Cannon, N. S., Hu, W. L., and Gelles, D. S. 1987.  
        "Charpy impact test results for low-activation ferritic alloys".  United States.  https://doi.org/10.2172/6806112.  https://www.osti.gov/servlets/purl/6806112.

Copy to clipboard


                    
@article{osti_6806112,

  title        = {Charpy impact test results for low-activation ferritic alloys},

  author       = {Cannon, N. S. and Hu, W. L. and Gelles, D. S.},

  abstractNote = {The objective of this work is to evaluate the shift of the ductile to brittle transition temperature (DBTT) and the reduction of the upper shelf energy (USE) due to neutron irradiation of low activation ferritic alloys. Six low activation ferritic alloys have been tested following irradiation at 365/sup 0/C to 10 dpa and compared with control specimens in order to assess the effect of irradiation on Charpy impact properties.},

  doi          = {10.2172/6806112},

  url          = {https://www.osti.gov/biblio/6806112},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri May 01 00:00:00 EDT 1987},

  month        = {Fri May 01 00:00:00 EDT 1987}

}

Copy to clipboard

Technical Report:

View Technical Report (0.45 MB)

https://doi.org/10.2172/6806112

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Charpy impact test results of four low activation ferritic alloys irradiated at 370{degrees}C to 15 DPA

Technical Report Schubert, L.; Hamilton, M.; Gelles, D.

Miniature CVN specimens of four low activation ferritic alloys have been impact tested following irradiation at 370{degrees}C to 15 dpa. Comparison of the results with those of control specimens indicates that degradation in the impact behavior occurs in each of these four alloys. The 9Cr-2W alloy referred to as GA3X and the similar alloy F82H with 7.8Cr-2W appear most promising for further consideration as candidate structural materials in fusion energy system applications. These two alloys exhibit a small DBTT shift to higher temperatures but show increased absorbed energy on the upper shelf.
https://doi.org/10.2172/414869

Full Text Available
Tensile and Charpy impact properties of irradiated reduced-activation ferritic steels

Conference Klueh, R; Alexander, D

Tensile tests were conducted on 8 reduced-activation Cr-W steels after irradiation to 15-17 and 26-29 dpa, and Charpy impact tests were conducted on steels irradiated to 26-29 dpa. Irradiation was in Fast Flux Test Facility at 365 C on steels containing 2.25-12% Cr, varying amounts of W, V, and Ta, and 0.1%C. Previously, tensile specimens were irradiated to 6-8 dpa and Charpy specimens to 6-8, 15- 17, and 20-24 dpa. Tensile and Charpy specimens were also thermally aged to 20,000 h at 365 C. Thermal aging had little effect on tensile properties or ductile-brittle transition temperature (DBTT), but several steelsmore »« less
Full Text Available
Tensile and charpy impact properties of irradiated reduced-activation ferritic steels

Technical Report Klueh, R.; Alexander, D.

Tensile tests were conducted on eight reduced-activation Cr-W steels after irradiation to 15-17 and 26-29 dpa, and Charpy impact tests were conducted on the steels irradiated to 26-29 dpa. Irradiation was in the Fast Flux Test Facility at 365{degrees}C on steels containing 2.25-12% Cr, varying amounts of W, V, and Ta, and 0.1%C. Previously, tensile specimens were irradiated to 6-8 dpa and Charpy specimens to 6-8, 15-17, and 20-24 dpa. Tensile and Charpy specimens were also thermally aged to 20000 h at 365{degrees}C. Thermal aging had little effect on the tensile behavior or the ductile-brittle transition temperature (DBTT), but severalmore »« less
https://doi.org/10.2172/414868

Full Text Available
Further Charpy impact test results of low activation ferritic alloys, irradiated at 430{degrees}C to 67 dpa

Technical Report Schubert, L.; Hamilton, M.; Gelles, D.

Miniature CVN specimens of four ferritic alloys, GA3X, F82H, GA4X and HT9, have been impact tested following irradiation at 430{degrees}C to 67 dpa. Comparison of the results with those of the previously tested lower dose irradiation condition indicates that the GA3X and F82H alloys, two primary candidate low activation alloys, exhibit virtually identical behavior following irradiation at 430{degrees}C to {approximately}67 dpa and at 370{degrees}C to {approximately}15 dpa. Very little shift is observed in either DBTT or USE relative to the unirradiated condition. The shifts in DBTT and USE observed in both GA4X and HT9 were smaller after irradiation at 430{degrees}Cmore »« less
https://doi.org/10.2172/543288

Full Text Available
Effect of heat treatment and irradiation temperature on impact behavior of irradiated reduced-activation ferritic steels

Technical Report Klueh, R.; Alexander, D.

Charpy tests were conducted on eight normalized-and-tempered reduced-activation ferritic steels irradiated in two different normalized conditions. Irradiation was conducted in the Fast Flux Test Facility at 393 C to {approx}14 dpa on steels with 2.25, 5, 9, and 12% Cr (0.1% C) with varying amounts of W, V, and Ta. The different normalization treatments involved changing the cooling rate after austenitization. The faster cooling rate produced 100% bainite in the 2.25 Cr steels, compared to duplex structures of bainite and polygonal ferrite for the slower cooling rate. For both cooling rates, martensite formed in the 5 and 9% Cr steels,more »« less
https://doi.org/10.2172/335391

Full Text Available

Similar Records