Determining PCB sorption/desorption behavior on sediments using selective supercritical fluid extraction. 1: Desorption from historically contaminated samples
- Univ. of Lund (Sweden). Dept. of Analytical Chemistry
- Univ. of North Dakota, Grand Forks, ND (United States). Energy and Environmental Research Center
Supercritical fluid extraction (SFE) conditions using pure CO{sub 2} from 40 to 150 C were developed that allow sequential extraction of PCBs associated with rapidly desorbing, moderately, slowly, and very slowly desorbing sites on historically contaminated sediments and soil. Five samples with individual PCB concentrations ranging from a few to {approximately} 100,000 ng/g all showed PCBs associated with each type of site, but the fraction of PCBs associated with rapidly desorbing or slowly desorbing sites varied greatly from sample to sample. Although some small differences in the desorption behavior of individual PCBs was observed from a particular sample, the differences among samples were much greater demonstrating that the sample matrix and not the PCB identity was most important in controlling desorption behavior. When all five samples were compared, simple considerations concerning sample particle size, water content, organic content, and PCB concentration could not predict desorption behavior, demonstrating that PCB desorption processes depend on multiple sample characteristics. Comparison of the quantity vs. distribution of PCBs on the fast to very slow sites indicates that association with slowly desorbing sites is not limited by the number of sites, but rather that PCBs on historically contaminated samples tend to distribute among the various sites available.
- OSTI ID:
- 678058
- Journal Information:
- Environmental Science and Technology, Vol. 33, Issue 13; Other Information: PBD: 1 Jul 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Determining PCB sorption/desorption behavior on sediments using selective supercritical fluid extraction. 2: Describing PCB extraction with simple diffusion models
CHARACTERIZING SOIL/WATER SORPTION AND DESORPTION BEHAVIOR OF BTEX AND PAHS USING SELECTIVE SUPERCRITICAL FLUID EXTRACTION (SFE)