Performance tuned radioisotope thermophotovoltaic space power system
- EDTEK, Inc., 7082 South 220th Street, Kent, Washington 98032-1910 (United States)
The trend in space exploration is to use many small, low-cost, special-purpose satellites instead of the large, high-cost, multipurpose satellites used in the past. As a result of this new trend, there is a need for lightweight, efficient, and compact radioisotope fueled electrical power generators. This paper presents an improved design for a radioisotope thermophotovoltaic (RTPV) space power system in the 10 W to 20 W class which promises up to 37.6 watts at 30.1{percent} efficiency and 25 W/kg specific power. The RTPV power system concept has been studied and compared to radioisotope thermoelectric generators (RTG) radioisotope, Stirling generators and alkali metal thermal electric conversion (AMTEC) generators (Schock, 1995). The studies indicate that RTPV has the potential to be the lightest weight, most efficient and most reliable of the three concepts. However, in spite of the efficiency and light weight, the size of the thermal radiator required to eliminate excess heat from the PV cells and the lack of actual system operational performance data are perceived as obstacles to RTPV acceptance for space applications. Between 1994 and 1997 EDTEK optimized the key converter components for an RTPV generator under Department of Energy (DOE) funding administered via subcontracts to Orbital Sciences Corporation (OSC) and EG&G Mound Applied Technologies Laboratory (Horne, 1995). The optimized components included a resonant micromesh infrared bandpass filter, low-bandgap GaSb PV cells and cell arrays. Parametric data from these components were supplied to OSC who developed and analyzed the performance of 100 W, 20 W, and 10 W RTPV generators. These designs are described in references (Schock 1994, 1995 and 1996). Since the performance of each class of supply was roughly equivalent and simply scaled with size, this paper will consider the OSC 20 W design as a baseline. The baseline 20-W RTPV design was developed by Schock, et al of OSC and has been presented elsewhere. The baseline design, centered around components and measured parametric data developed by EDTEK, Inc., promised an overall thermal-to-electric system output of 23 W at a conversion efficiency of 19{percent}, 1.92 kg system weight, and a specific power of 13.3 W/kg. The improved design reported herein promises up to 37.6 W at 30.1{percent} efficiency, 1.5 kg system weight, up to 25 W/kg specific power, a six-fold reduction in thermal radiator size over the baseline design, as well as a lower isotope temperature for greater safety. The six-fold reduction in thermal radiator size removes one of the greatest obstacles to applying RTPV in space missions. {copyright} {ital 1998 American Institute of Physics.}
- OSTI ID:
- 664642
- Report Number(s):
- CONF-980103-; ISSN 0094-243X; TRN: 98:011597
- Journal Information:
- AIP Conference Proceedings, Vol. 420, Issue 1; Conference: Space technology and applications international forum, Albuquerque, NM (United States), 25-29 Jan 1998; Other Information: PBD: Jan 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effect of updated data base and improved analysis on performance of radioisotope thermophotovoltaic converter
Emissivity Tuned Emitter for RTPV Power Sources