Comparison methods for nitrogen leak calibration
- ed.
Two comparison measurement techniques were developed and tested by the Physical Metrology Laboratory at Rocky Flats for the calibration of nitrogen leaks. The first technique uses a simple rate-of-rise measurement, whereas the second is based upon comparison of ultimate pressures attainable within a well-defined vacuum chamber. Both methods were originated to provide a relatively fast and accurate means of leak rate determination, which is traceable to the Primary Standards Laboratory, Albuquerque, New Mexico. Theoretical and operational fundamentals of each method along with their test results are compiled. 2 refs., 3 figs., 3 tabs.
- Research Organization:
- Rockwell International Corp., Golden, CO (United States). Rocky Flats Plant
- DOE Contract Number:
- AC04-76DP03533
- OSTI ID:
- 6524083
- Report Number(s):
- RFP-4206; ON: DE89006390
- Resource Relation:
- Other Information: Portions of this document are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
Calibration of a Harwood DWT-1000 controlled-clearance piston gauge
Permeation tubes for dynamic mass spectrometry calibration
A system to determine temperature dependence of calibrated helium leaks
Technical Report
·
Wed Sep 30 00:00:00 EDT 1987
·
OSTI ID:6524083
Permeation tubes for dynamic mass spectrometry calibration
Conference
·
Fri May 01 00:00:00 EDT 1987
·
OSTI ID:6524083
A system to determine temperature dependence of calibrated helium leaks
Technical Report
·
Sun Dec 31 00:00:00 EST 1989
·
OSTI ID:6524083