skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Photovoltaic system testing techniques and results

Abstract

For the past three years, the New Mexico Solar Energy Institute (NMSEI) has been testing and collecting data on eight intermediate size flat-plate PV systems. These data now provide a valuable data base for determining component reliability and system degradation trends. This paper discusses: the specific test techniques used by NMSEI and the reliability of photovoltaic modules revealed by this testing.

Authors:
 [1]
  1. (New Mexico Solar Energy Institute, Box 3 SOL, Las Cruces, NM (US))
Publication Date:
OSTI Identifier:
6496668
Resource Type:
Journal Article
Resource Relation:
Journal Name: IEEE Trans. Power Electronics; (United States); Journal Volume: 3:3
Country of Publication:
United States
Language:
English
Subject:
14 SOLAR ENERGY; FLAT PLATE COLLECTORS; RELIABILITY; SIZE; NEW MEXICO; SOLAR ENERGY RESEARCH INSTITUTE; DATA BASE MANAGEMENT; PERFORMANCE TESTING; EQUIPMENT; FEDERAL REGION VI; MANAGEMENT; NATIONAL ORGANIZATIONS; NORTH AMERICA; SOLAR COLLECTORS; SOLAR EQUIPMENT; TESTING; US DOE; US ORGANIZATIONS; USA; 141000* - Solar Collectors & Concentrators

Citation Formats

Lashway, C. Photovoltaic system testing techniques and results. United States: N. p., 1988. Web. doi:10.1109/60.8058.
Lashway, C. Photovoltaic system testing techniques and results. United States. doi:10.1109/60.8058.
Lashway, C. 1988. "Photovoltaic system testing techniques and results". United States. doi:10.1109/60.8058.
@article{osti_6496668,
title = {Photovoltaic system testing techniques and results},
author = {Lashway, C.},
abstractNote = {For the past three years, the New Mexico Solar Energy Institute (NMSEI) has been testing and collecting data on eight intermediate size flat-plate PV systems. These data now provide a valuable data base for determining component reliability and system degradation trends. This paper discusses: the specific test techniques used by NMSEI and the reliability of photovoltaic modules revealed by this testing.},
doi = {10.1109/60.8058},
journal = {IEEE Trans. Power Electronics; (United States)},
number = ,
volume = 3:3,
place = {United States},
year = 1988,
month = 9
}
  • A prototype current-controlled power conditioning system has been developed and tested on a weak rural feeder line at Kalbarri, about 600 km northwest of Perth in Western Australia. This system sources 20 kW of power from a photovoltaic array with a maximum power point tracking control. In addition, it provides voltage support for the grid at Kalbarri by varying its reactive power in response to the measured voltage at the point of connection. This paper describes the development and testing of the power conditioning system.
  • This paper reports on a mathematical mode for a photovoltaic (PV) solar-powered water pumping system that has been developed. It takes into account the effect of solar intensity and temperature on the power generated by the PV array, the torque-speed characteristics of the dc motor, the head-discharge characteristics of the pump, and the hydraulic losses in the pipeline. A computer program simulates the performance of the system under a specified solar condition by computing a series of quasi-steady states, each lasting for a short interval. By determining the operating point of the pump, the amount of water pumped during themore » stimulation period is calculated. The computed results are compared with those obtained from actual tests on a 2-HP water pumping units supplied from 4-kW PV array.« less
  • Due to poor sizing grid-connected photovoltaic systems often underexploit the capacity of the static inverter resulting in reduced efficiency and an increase in the cost of energy. The objectives of the present project are: to show the effects of an oversized solar module area on the efficiency and profitability of a system, and to define the conditions required for oversizing. The simulations performed in a previous phase of the project showed that higher profitability was attained with the power of the photovoltaic field area sized between 40 and 80% (depending on the conditions) above the nominal power of the staticmore » inverter. The validation of these results was obtained from two sites: Herdern (near Zurich/Switzerland/lat 47.5 {degree}N/long 8.4 {degree}E/410 m above sea level) with three installations of 4.4, 3.8 and 3.4 kW S.T.C. for an inverter of nominal 3.3 kW a.c.; and Lausanne (Switzerland/lat 46.6 {degree}N/long 6.6 {degree}E/410 m above sea level) with three installations of 5.6, 4.0 and 2.4 kW S.T.C. for a static inverter of nominal 3.4 kW a.c. Detailed results are available for tests performed on both installations. The results clearly demonstrate the difference between optimal energy production and optimal energy cost. Finally, recommendations are given for optimization calculations of the photovoltaic module area and new construction directives for static inverters with a view to oversizing are issued. 5 refs., 6 figs., 8 tabs.« less