skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: High speed non-latching squid binary ripple counter

Conference · · IEEE Trans. Magn.; (United States)
OSTI ID:6486021

High speed, single flux quantum (SFQ) binary scalers are important components in superconducting analog-to-digital converters (ADC). This paper reviews the concept for a SQUID ADC and the design of an SFQ binary ripple counter, and reports the simulation of key components, and fabrication and performance of non-latching SQUID scalers and SFQ binary ripple counters. The SQUIDs were fabricated with Nb/Nb/sub 2/O/sub 5//PbIn junctions and interconnected by monolithic superconducting transmission lines and isolation resistors. Each SQUID functioned as a bistable flip-flop with the input connected to the center of the device and the output across one junction. All junctions were critically damped to optimize the pulse response. Operation was verified by observing the dc I-V curves of successive SQUIDs driven by a cw pulse train generated on the same chip. Each SQUID exhibited constant-voltage current steps at 1/2 the voltage of the preceding device as expected from the Josephson voltage-to-frequency relation. Steps were observed only for the same voltage polarity of successive devices and for proper phase bias of the SQUID. Binary frequency division was recorded up to 40GHz for devices designed to operate to 28GHz.

Research Organization:
TRW Space and Technology Group, Redondo Beach, CA
OSTI ID:
6486021
Report Number(s):
CONF-840937-
Journal Information:
IEEE Trans. Magn.; (United States), Vol. MAG-21:2; Conference: Applied superconductivity conference, San Diego, CA, USA, 9 Sep 1984
Country of Publication:
United States
Language:
English