skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Heat transfer and pressure drop measurements in an air/molten salt direct-contact heat exchanger

Conference ·
OSTI ID:6331047

This paper presents a comparison of experimental data with a recently published model of heat exchange in irrigated packed beds. Heat transfer and pressure drop were measured in a 150 mm (ID) column with a 610-mm bed of metal Pall rings. Molten nitrate salt and preheated air were the working fluids with a salt inlet temperature of approximately 440/degree/C and air inlet temperatures of approximately 230/degree/C. A comparison between the experimental data and the heat transfer model is made on the basis of heat transfer from the salt. For the range of air and salt flow rates tested, 0.3 to 1.2 kg/m/sup 2/ s air flow and 6 to 18 kg/m/sup 2/ s salt flow, the data agree with the model within 22% standard deviation. In addition, a model for the column pressure drop was validated, agreeing with the experimental data within 18% standard deviation over the range of column pressure drop from 40 to 1250 Pa/m. 25 refs., 7 figs., 2 tabs.

Research Organization:
Solar Energy Research Inst., Golden, CO (USA)
DOE Contract Number:
AC02-83CH10093
OSTI ID:
6331047
Report Number(s):
SERI/TP-253-3426; CONF-890436-7; ON: DE89000837
Resource Relation:
Conference: American Society of Mechanical Engineers solar energy conference, San Diego, CA, USA, 2 Apr 1989; Other Information: Portions of this document are illegible in microfiche products
Country of Publication:
United States
Language:
English