The effects of plate stress-strain behavior and pipemaking variables on the yield strength of large-diameter DSAW line pipe
Recent stringent specifications for large-diameter double-submerged-arc-welded gas-transmission line pipe include requirements that limit the range of allowable pipe yield strengths instead of the previous requirement of a minimum yieldstrength value. These restricted pipe yield-strength ranges require control of the range of the yield strength in the plate used to make the pipe, knowledge of the relationship between the plate and pipe yield strength, and the effect of pipemaking (forming) variables on this relationship. The present study was conducted to determine the interrelationships among plate yield strength, plate stress-strain properties, pipe-forming variables, and pipe yield strength. In the first part of this work, pipe-forming strains were measured after each forming operating during actual pipe fabrication and the strains compared to the calculated values. The experimental and analytical values were in good agreement; thus, the cyclic straining of the original plate material during pipe forming was determined. In the second part of the program, specimens of typical line-pipe steels were cyclically loaded in the laboratory according to the cyclic histories that sections in the plate would experience when fabricated into pipe. The results showed a significant effect of the plate stress-strain behavior, as well as the amount of straining (or forming) on the resulting yield strength.
- Research Organization:
- US Steel Research, Monroeville, Pa.
- OSTI ID:
- 6156813
- Journal Information:
- J. Eng. Mater. Technol.; (United States), Vol. 106:2
- Country of Publication:
- United States
- Language:
- English
Similar Records
Innovative Method for Welding in Generation 3 CSP to Enable Reliable Manufacturing of Solar Receivers to withstand Daily Cycling at Temperatures Above 700°C (Final Technical Report)
Thermal strain of pipes composed with high strength polyethylene fiber reinforced plastics at cryogenic temperatures
Related Subjects
36 MATERIALS SCIENCE
NATURAL GAS
PIPELINES
PLATES
STRAINS
STRESSES
SUBMERGED ARC WELDING
YIELD STRENGTH
STEELS
COMPRESSION
EXPANSION
HARDENING
SPECIFICATIONS
WALLS
ALLOYS
ARC WELDING
ENERGY SOURCES
FABRICATION
FLUIDS
FOSSIL FUELS
FUEL GAS
FUELS
GAS FUELS
GASES
IRON ALLOYS
IRON BASE ALLOYS
JOINING
MECHANICAL PROPERTIES
WELDING
032000* - Natural Gas- Transport
Handling
& Storage
360103 - Metals & Alloys- Mechanical Properties