RF power amplifier for the CERN SPS operating as LEP injector
To permit electron-positron acceleration in the SPS, a new 200 MHz RF system will be installed. The system consists of 32 single-cell, high Q accelerating cavities, providing a total peak accelerating voltage of 30 MV. Each cavity will be equipped with an RF power amplifier, capable of delivering 60 kW CW or 110 kW pulsed power (pulse length up to 1 second, duty cycle up to 20%). The power amplifier will be mounted directly on top of the cavity. Since the space in the existing SPS tunnel is very limited, a compact amplifier is needed, requiring special RF circuitry design. Also the choice of material is restricted due to the presence of ionizing radiation in the tunnel. This paper describes the design of the amplifier and presents the test results, obtained on a prototype version.
- Research Organization:
- European Organization for Nuclear Research (CERN), Geneva
- OSTI ID:
- 6116624
- Report Number(s):
- CONF-850504-
- Journal Information:
- IEEE Trans. Nucl. Sci.; (United States), Vol. NS-32:5; Conference: Particle accelerator conference, Vancouver, Canada, 13 May 1985
- Country of Publication:
- United States
- Language:
- English
Similar Records
A prototype 7.5 MHz Finemet(Trademark) loaded RF cavity and 200kW amplifier for the Fermilab proton driver
RF systems engineering for the SSC collider rings
Related Subjects
POWER AMPLIFIERS
PERFORMANCE
RF SYSTEMS
BEAM INJECTION
CERN SPS SYNCHROTRON
ELECTRON BEAMS
LEP STORAGE RINGS
POSITRON BEAMS
ACCELERATORS
AMPLIFIERS
BEAMS
CYCLIC ACCELERATORS
ELECTRONIC EQUIPMENT
EQUIPMENT
LEPTON BEAMS
PARTICLE BEAMS
STORAGE RINGS
SYNCHROTRONS
430303* - Particle Accelerators- Experimental Facilities & Equipment
430400 - Particle Accelerators- Storage Rings