skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Exotic damping ring lattices

Abstract

This paper looks at, and compares three types of damping ring lattices: conventional, wiggler lattice with finite ..cap alpha.., wiggler lattice with ..cap alpha.. = 0, and observes the attainable equilibrium emittances for the three cases assuming a constraint on the attainable longitudinal impedance of 0.2 ohms. The emittance obtained are roughly in the ratio 4:2:1 for these cases.

Authors:
Publication Date:
Research Org.:
Stanford Linear Accelerator Center, Menlo Park, CA (USA)
OSTI Identifier:
6081393
Report Number(s):
SLAC-PUB-4329; CONF-8703149-3
ON: DE87012833
DOE Contract Number:
AC03-76SF00515
Resource Type:
Conference
Resource Relation:
Conference: ICFA workshop on low emittance e/sup -/ -e/sup +/ beams, Upton, NY, USA, 20 Mar 1987; Other Information: Portions of this document are illegible in microfiche products. Original copy available until stock is exhausted
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; WIGGLER MAGNETS; COMPARATIVE EVALUATIONS; DAMPING; BEAM BENDING MAGNETS; BEAM EMITTANCE; RELATIVISTIC RANGE; ELECTRICAL EQUIPMENT; ELECTROMAGNETS; ENERGY RANGE; EQUIPMENT; MAGNETS; 430300* - Particle Accelerators- Auxiliaries & Components

Citation Formats

Palmer, R.B.. Exotic damping ring lattices. United States: N. p., 1987. Web.
Palmer, R.B.. Exotic damping ring lattices. United States.
Palmer, R.B.. Fri . "Exotic damping ring lattices". United States. doi:. https://www.osti.gov/servlets/purl/6081393.
@article{osti_6081393,
title = {Exotic damping ring lattices},
author = {Palmer, R.B.},
abstractNote = {This paper looks at, and compares three types of damping ring lattices: conventional, wiggler lattice with finite ..cap alpha.., wiggler lattice with ..cap alpha.. = 0, and observes the attainable equilibrium emittances for the three cases assuming a constraint on the attainable longitudinal impedance of 0.2 ohms. The emittance obtained are roughly in the ratio 4:2:1 for these cases.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Fri May 01 00:00:00 EDT 1987},
month = {Fri May 01 00:00:00 EDT 1987}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • We report on the lattice design of the Next Linear Collider (NLC) damping rings. The damping rings are required to provide low emittance electron and positron bunch trains to the NLC linacs, at a rate of 120 Hz. We present an optical design, based on a theoretical minimum emittance (TME) lattice, to produce the required normalized extracted beam emittances gex = 3 mm-mrad and gey = 0.02 mm mrad. An assessment of dynamic aperture and non-linear effects is given. The positron pre-damping ring, required to reduce the emittance of the positron beam such that it may be accepted by amore » main damping ring, is also described.« less
  • Using normalized one-turn resonance-basis Lie generators in conjunction with an action-angle tracking algorithm (nPB tracking), the authors have been able to better understand the relationship between the dynamic aperture and lattice nonlinearities. Tunes, tune shifts with amplitude and/or energy, and resonance strengths may be freely changed to probe their individual impact on the dynamic aperture. Fast beam-beam simulations can be performed with the inclusion of nonlinear lattice effects. Examples from studies of the PEP-II lattices are given.
  • The code elegant is widely used for simulation of linacs for drivers for free-electron lasers. Less well known is that elegant is also a very capable code for simulation of storage rings. In this paper, we show a newly developed graphical user interface that allows the user to easily take advantage of these capabilities. The interface is designed for use on a Linux cluster, providing very high throughput. It can also be used on a single computer. Among the features it gives access to are basic calculations (Twiss parameters, radiation integrals), phase-space tracking, nonlinear dispersion, dynamic aperture (on-and off-momentum), frequencymore » map analysis, and collective effects (IBS, bunch-lengthening). Using a cluster, it is easy to get highly detailed dynamic aperture and frequency map results in a surprisingly short time.« less
  • A method of RF manipulation is described by which a bunch may be separated longitudinally from the other bunches before being ejected. This allows the use of a higher bunch frequency and therefore a smaller ring diameter in damping rings for high energy e/sup +/e/sup -/ colliders.
  • Besides the optics measurements described elsewhere, machine experiments were done at the SLC damping ring to determine some of its parameters. The synchrotron radiation energy loss which gives the damping rates was measured by observing the RF-voltage dependence of the synchronous phase angle. The emittance was obtained from the synchrotron light monitor, scraper measurements and by extracting the beam through a doublet and measuring its size for different quadrupole settings. Current dependent effects such as parasitic mode losses, head tail instabilities, synchrotron and betatron frequency shifts were measured to estimate the impedance. RF-cavity beam loading and its compensation were alsomore » studied and ion collection was investigated. All results agree reasonably well with expectations and indicate no limitations to the design performance.« less