Converting a commercial electric direct-drive robot to operate from joint torque commands
Many robot control algorithms for high performance in-contact operations including hybrid force/position, stiffness control and impedance control approaches require the command the joint torques. However, most commercially available robots do not provide joint torque command capabilities. The joint command at the user level is typically position or velocity and at the control developer level is voltage, current, or pulse-width, and the torque generated is a nonlinear function of the command and joint position. To enable the application of high performance in-contact control algorithms to commercially available robots, and thereby facilitate technology transfer from the robot control research community to commercial applications, an methodology has been developed to linearize the torque characteristics of electric motor-amplifier combinations. A four degree of freedom Adept 2 robot, having pulse-width modulation amplifiers and both variable reluctance and brushless DC motors, is converted to operate from joint torque commands to demonstrate the methodology. The commercial robot controller is replaced by a VME-based system incorporating special purpose hardware and firmware programmed from experimental data. The performance improvement is experimentally measured and graphically displayed using three-dimensional plots of torque vs command vs position. The average percentage torque deviation over the command and position ranges is reduced from as much as 76% to below 5% for the direct-drive joints 1, 2 and 4 and is cut by one half in the remaining ball-screw driven joint 3. Further, the torque deviation of the direct-drive joints drops below 2.5% if only the upper 90% of the torque range is considered. 23 refs., 20 figs., 2 tabs.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE; USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5168590
- Report Number(s):
- SAND-91-1548; ON: DE92000611
- Country of Publication:
- United States
- Language:
- English
Similar Records
Torque linearizing hardware for the electric joint motors of a direct-drive robot
Torque linearizing hardware for the electric joint motors of a direct-drive robot
Related Subjects
99 GENERAL AND MISCELLANEOUS//MATHEMATICS, COMPUTING, AND INFORMATION SCIENCE
ROBOTS
CONTROL
ALGORITHMS
COMPUTERIZED CONTROL SYSTEMS
ELECTRIC MOTORS
JOINTS
MODIFICATIONS
TORQUE
CONTROL SYSTEMS
MATHEMATICAL LOGIC
MOTORS
420200* - Engineering- Facilities
Equipment
& Techniques
990200 - Mathematics & Computers