skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A trenchless alternative for gas main replacement

Abstract

Pipe-bursting is a trenchless pipeline replacement method that has primarily been used in the wastewater industry to replace deteriorating sewers. Originally, however, this technology was brought to the US in the mid-1980s as a method for the replacement of gas mains. The process is now being rediscovered by gas utilities for use in specific situations as a means of distribution system renewal. Cinergy Corp. has a program of examining and testing new gas main installation and rehabilitation methods under actual field conditions. As part of these efforts, Union Light Heat and Power Co., a division of Cinergy serving the Covington, KY area, recently used pipe-bursting technology to replace a 400-foot section of 8-inch diameter cast iron main. The new line was then put into service as an additional feeder to customers in the Covington service area. Cinergy engineers have determined that to be considered for pipe-bursting, a main should be the end of a one-way feed or in a two-way feed where there is a sufficient amount of gas to supply customers on other parts of the line. In most cases, the company does not shut off customer service for more than one day`s work, otherwise a bypass system maymore » be required. Another prime consideration is the number of customer service connections on a line. This is a factor because of the need to excavate and access service connections along the newly installed line. A third requirement for pipe-bursting is the need to have at least three feet of ground cover over the main. The installation procedure is described.« less

Authors:
; ;  [1]
  1. Cinergy Corp., Cincinnati, OH (United States)
Publication Date:
OSTI Identifier:
514774
Resource Type:
Journal Article
Journal Name:
Pipeline and Gas Journal
Additional Journal Information:
Journal Volume: 224; Journal Issue: 6; Other Information: PBD: Jun 1997
Country of Publication:
United States
Language:
English
Subject:
03 NATURAL GAS; PIPELINES; WINCHES; MAINTENANCE; RETROFITTING; NATURAL GAS; NONDESTRUCTIVE TESTING; INSTALLATION; SITE PREPARATION; EXCAVATION

Citation Formats

Schuler, D, Dierker, K, and Robinson, J. A trenchless alternative for gas main replacement. United States: N. p., 1997. Web.
Schuler, D, Dierker, K, & Robinson, J. A trenchless alternative for gas main replacement. United States.
Schuler, D, Dierker, K, and Robinson, J. 1997. "A trenchless alternative for gas main replacement". United States.
@article{osti_514774,
title = {A trenchless alternative for gas main replacement},
author = {Schuler, D and Dierker, K and Robinson, J},
abstractNote = {Pipe-bursting is a trenchless pipeline replacement method that has primarily been used in the wastewater industry to replace deteriorating sewers. Originally, however, this technology was brought to the US in the mid-1980s as a method for the replacement of gas mains. The process is now being rediscovered by gas utilities for use in specific situations as a means of distribution system renewal. Cinergy Corp. has a program of examining and testing new gas main installation and rehabilitation methods under actual field conditions. As part of these efforts, Union Light Heat and Power Co., a division of Cinergy serving the Covington, KY area, recently used pipe-bursting technology to replace a 400-foot section of 8-inch diameter cast iron main. The new line was then put into service as an additional feeder to customers in the Covington service area. Cinergy engineers have determined that to be considered for pipe-bursting, a main should be the end of a one-way feed or in a two-way feed where there is a sufficient amount of gas to supply customers on other parts of the line. In most cases, the company does not shut off customer service for more than one day`s work, otherwise a bypass system may be required. Another prime consideration is the number of customer service connections on a line. This is a factor because of the need to excavate and access service connections along the newly installed line. A third requirement for pipe-bursting is the need to have at least three feet of ground cover over the main. The installation procedure is described.},
doi = {},
url = {https://www.osti.gov/biblio/514774}, journal = {Pipeline and Gas Journal},
number = 6,
volume = 224,
place = {United States},
year = {Sun Jun 01 00:00:00 EDT 1997},
month = {Sun Jun 01 00:00:00 EDT 1997}
}