TRUPACT-I Unit 0 test data analysis. [Puncture bar impacts; free fall of package 12 inches onto unyielding surface; 30-foot free fall drop onto unyielding target; 40-inch drops onto 6-inch diagmeter puncture bar; engulfment in jet fuel fire for 35 minutes]
TRUPACT-I was tested to evaluate the response of the design to the normal and hypothetical accident conditions specified in applicable regulations. The governing regulations are contained in DOE Order No. 5480.1, Chapter 3 and 10 CFR, Part 71, Refs. 1 and 2. Tests were conducted at Oak Ridge National Laboratory, Oak Ridge, TN, and at Sandia National Laboratories, Albuquerque, NM. Normal condition tests included three 13-pound (1.25 in. diameter) puncture bar impacts onto the exterior surface and free fall of the package 12 inches onto an essentially unyielding surface. Hypothetical accident conditions included in the test sequence were two 30-foot free fall drops of the package onto an essentially unyielding target, four 40-inch drops onto a 6-inch-diameter puncture bar, and engulfment in a JP-4 jet fuel fire for 35 minutes. Instrumentation data traces will be published in Ref. 3 and are not reproduced herein. This report presents an analysis of the available data and an interpretation of the results. The results of the tests are compared to results from numerical analyses and scale model tests which are incorporated in the TRUPACT-I SARP, Ref. 4. 9 refs., 43 figs., 3 tabs.
- Research Organization:
- Sandia National Labs., Albuquerque, NM (USA); GA Technologies, Inc., San Diego, CA (USA)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 5085765
- Report Number(s):
- SAND-85-0943; TTC-0555; ON: DE86001780
- Resource Relation:
- Other Information: Portions of this document are illegible in microfiche products. Original copy available until stock is exhausted. Includes 5 sheets of 24x reduction microfiche
- Country of Publication:
- United States
- Language:
- English
Similar Records
Impact, puncture, and thermal testing of TRUPACT-I
A simplified analysis of the regulatory puncture test