A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW

Chen, J. C.

doi:10.2172/4636495

Title: A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW

Full Record
Other Related Research

Authors:: Chen, J. C.

Publication Date:: 1962-12-26

Research Org.:: Brookhaven National Lab., Upton, N.Y.

OSTI Identifier:: 4636495

Report Number(s):: BNL-6672

NSA Number:: NSA-17-037330

DOE Contract Number:: AT(30-2)-GEN-16

Resource Type:: Technical Report

Resource Relation:: Other Information: Orig. Receipt Date: 31-DEC-63

Country of Publication:: United States

Language:: English

Subject:: ENGINEERING AND EQUIPMENT; BOILING; BUBBLES; CONVECTION; DITTUS-BOELTER EQUATION; EQUATIONS; ERRORS; FLUID FLOW; FLUIDS; HEAT TRANSFER; MEASURED VALUES; ORGANIC COMPOUNDS; REYNOLDS NUMBER; SATURATION; SUPERHEATING; THERMODYNAMICS; TURBULENCE; VAPORS; WATER

Citation Formats


                    Chen, J. C. A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW.  United States: N. p., 1962. 
        Web.  doi:10.2172/4636495.

Copy to clipboard


                    Chen, J. C. A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW.  United States.  https://doi.org/10.2172/4636495

Copy to clipboard


                    Chen, J. C. 1962.  
        "A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW".  United States.  https://doi.org/10.2172/4636495.  https://www.osti.gov/servlets/purl/4636495.

Copy to clipboard


                    
@article{osti_4636495,

  title        = {A CORRELATION FOR BOILING HEAT TRANSFER TO SATURATED FLUIDS IN CONVECTIVE FLOW},

  author       = {Chen, J. C.},

  abstractNote = {},

  doi          = {10.2172/4636495},

  url          = {https://www.osti.gov/biblio/4636495},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {1962},

  month        = {12}

}

Copy to clipboard

Technical Report:

View Technical Report (1.46 MB)

https://doi.org/10.2172/4636495

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

A PROPOSED MECHANISM AND METHOD OF CORRELATION FOR CONVECTIVE BOILING HEAT TRANSFER WITH LIQUID METALS

Technical Report Chen, J

An additive, interacting mechanism of micro and macroconvective heat transfer is proposed to represent boiling heat transfer with net vapor generation to saturated liquid metals in convective flow. Based on this mechanism, a method for calculating boiling coefficients is developed. The correlating is shown to be in fair agreement with early experimental results for convective boiling of potassium and sodium. (auth)
SOME ANALYSES RELATED TO CONVECTIVE BOILING HEAT TRANSFER

Technical Report Chen, J
SIMULTANEOUS RADIATIVE AND CONVECTIVE HEAT TRANSFER IN AN ABSORBING, EMITTING, AND SCATTERING MEDIUM IN SLUG FLOW BETWEEN PARALLEL PLATES

Technical Report Chen, J.

The problem of coupled radiation and convection to a medium in slug flow between infinite, parallel plates was formulated in terms of discrete fluxes. Steady state, uniform heat input, and gray boundaries were assumed. The effects of absorption, emission, scattering, and flow were taken into account. For the general case where all these effects are present, it was necessary to approximate the fourth order temperature term by a truncated Taylor series. This approximation was not necessary for the special case where conductivity of the medium is negligible. Approximate, analytical solutions in closed-form for profiles of temperature, radiant fluxes, and heatmore »« less
https://doi.org/10.2172/4129771

Full Text Available
EQUATIONS FOR BILATERAL HEAT TRANSFER TO FLUIDS FLOWING IN CONCENTRIC ANNULI

Technical Report Dwyer, O

Theoretical equations were derived for calculating heat transfur coefficients for fluids flowing through concentric annuli for the following two cases: (A) constant and equal heat tluxes from both walls, and (B) constant, but unequal, heat fluxes from the walls, with equal wall temperatures at a given axial position along annular channel. In the derivations, the conditions of fully-established flow, and independence of physical properties with temperature variation across the flow channel, were assumed. The only geometrical parameter in this general case is the radius ratio r/sub 2//r/sub 1/, and in the study it was varied from 1.0 to 10.0. (auth)
ON THE TRANSFER OF HEAT TO FLUIDS FLOWING THROUGH PIPES, ANNULI, AND PARALLEL PLATES

Technical Report Dwyer, O.

Nusselt numbers were calculated for heat transfer to fluids flowing through annuli under conditions of uniform heat flux and fully established velocity and temperature profiles. The following cases were considered: (a) laminar flow, (b) slug flow, (c) turbulent flow with molecular conduction only, and (d) turbulent flow with both molecular and eddy conduction. These Nusselt numbers were determined for two conditions: heat transfer from the inner wall only and heat transfer from the outer wall only. The results were correlated by semi-empirical equations. The final results obtained on cases (a), (b), amd (c) are applicable to any fluid, whereas thosemore »« less
https://doi.org/10.2172/4633263

Full Text Available

Similar Records