Pitting of 3003 aluminum

Lee, R

Title: Pitting of 3003 aluminum

Full Record
Other Related Research

Abstract

The Advanced Photon Source is a state-of-the-art synchrotron light source. The storage ring vacuum chamber is fabricated from 6061 extruded Al. Water connections to the vacuum chambers that were fabricated from 3003 Al had developed water leaks, which were subsequently remedied after considerable investigations. Materials subjected to the pitting analysis in this study are 3003, 6061, and 6063 Al.

Authors:: Lee, R

Publication Date:: 1996-12-31

Research Org.:: Argonne National Lab. (ANL), Argonne, IL (United States)

Sponsoring Org.:: USDOE Office of Energy Research, Washington, DC (United States)

OSTI Identifier:: 459978

Report Number(s):: ANL/XFD/CP-91781; CONF-9607183-1
ON: DE97004086; TRN: 97:007356

DOE Contract Number:: W-31109-ENG-38

Resource Type:: Conference

Resource Relation:: Conference: IMS/ASM symposium conference, Pittsburg, PA (United States), 21-24 Jul 1996; Other Information: PBD: [1996]

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; 43 PARTICLE ACCELERATORS; ADVANCED PHOTON SOURCE; VACUUM SYSTEMS; STORAGE RINGS; COOLING SYSTEMS; ALUMINIUM; PITTING CORROSION

Citation Formats


                    Lee, R. Pitting of 3003 aluminum.  United States: N. p., 1996. 
        Web.

Copy to clipboard


                    Lee, R. Pitting of 3003 aluminum.  United States.

Copy to clipboard


                    Lee, R. 1996.  
        "Pitting of 3003 aluminum".  United States.  https://www.osti.gov/servlets/purl/459978.

Copy to clipboard


                    
@article{osti_459978,

  title        = {Pitting of 3003 aluminum},

  author       = {Lee, R},

  abstractNote = {The Advanced Photon Source is a state-of-the-art synchrotron light source. The storage ring vacuum chamber is fabricated from 6061 extruded Al. Water connections to the vacuum chambers that were fabricated from 3003 Al had developed water leaks, which were subsequently remedied after considerable investigations. Materials subjected to the pitting analysis in this study are 3003, 6061, and 6063 Al.},

  doi          = {},

  url          = {https://www.osti.gov/biblio/459978},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {1996},

  month        = {12}

}

Copy to clipboard

Conference:

View Conference (0.45 MB)

Other availability

Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Photon stimulated desorption measurement of an extruded aluminum beam chamber for the Advanced Photon Source

Journal Article Foerster, C; Lanni, C; Noonan, J; ... - Journal of Vacuum Science and Technology, A

The Advanced Photon Source (APS), presently being commissioned, will produce x rays of unprecedented brightness. The high energy ring of the APS is a 7 GeV positron storage ring, 1104 m in circumference designed to operate at less than 10{sup {minus}9} Torr with 300 mA of beam and a greater than 10 h lifetime. The storage ring vacuum chamber is constructed from an extruded 6063 aluminum alloy. During the construction phase, a 2.34-m-long section of the APS extruded aluminum chamber was set up on National Synchrotron Light Source (NSLS) X-ray Beamline X28A and photon stimulated desorption (PSD) was measured. Cleaningmore »« less
https://doi.org/10.1116/1.579940
TIG welding of aluminum alloys for the APS storage ring - a UHV application

Technical Report Goeppner, G

The Advanced Photon Source (APS) incorporates a 7-GeV positron storage ring 1104 meters in circumference. The storage ring vacuum system is designed to maintain a pressure of 1 nTorr or less with a circulating current of 300 mA to enable beam lifetimes of greater than 10 hours. The vacuum chamber is an aluminum extrusion of 6063T5 alloy. There are 235 separate aluminum vacuum chambers in the storage ring connected by stainless steel bellows assemblies. Aluminum was chosen for the vacuum chamber because it can be economically extruded and machined, has good thermal conductivity, low thermal emissivity, a low outgassing rate,more »« less
https://doi.org/10.2172/379062

Full Text Available
Photon stimulated desorption measurement of an extruded aluminum beam chamber for the Advanced Photon Source

Conference Foerster, C; Lanni, C; Noonan, J; ...

The Advanced Photon Source (APS), presently being commisioned, will produce X-ray s of unprecedented brightness. The high energy ring of the APS is a 7 GeV positron storage ring, 1104 meters in circumference designed to operate at less than 10{sup {minus}9} Torr with 300 ma of beam and a greater than 10 hour lifetime. The storage ring vacuum chamber is constructed from an extruded 6063 aluminum alloy. During the construction phase, a 2.34 m long section of the APS extruded aluminum chamber was set up on National Synchrotron Light Source (NSLS) X-ray Beamlline X28A and Photon Stimulated Desorption (PSD) wasmore »« less
Full Text Available
UHV seal studies for the advanced photon source storage ring vacuum system

Conference Gonczy, J; Ferry, R; Niemann, R; ...

The Advanced Photon Source (APS) Storage Ring Vacuum Chambers (SRVC) are constructed of aluminum. The chamber design incorporates aluminum alloy 2219-T87 Conflat flanges welded to an aluminum alloy 6063-T5 extruded chamber body. Vacuum connections to the aluminum Conflat chamber flanges are by means of 304 stainless steel Conflat flanges. To evaluate the Conflat seal assemblies relative to vacuum bake cycles, a Conflat Bake Test Assembly (CBTA) was constructed, and thermal cycling tests were performed between room temperature and 150{degrees}C on both stainless steel to aluminum Conflat assemblies and aluminum to aluminum Conflat assemblies. A Helicoflex Bake Test Assembly (HBTA) wasmore »« less
Full Text Available
Welding procedure specification. Supplement 1. Records of procedure qualification tests. Gas tungsten arc (DC) welding to aluminum alloys 1XXX and 3003 to 6XXX. [1060, 1100, and 3003 to 6061 and 6063]

Technical Report Wodtke, C; Frizzell, D; Plunkett, W

Procedure WPS-2207 is qualified under Section IX of the ASME Boiler and Pressure Vessel Code for gas tungsten arc welding of aluminum alloys 1060, 1100, and 3003 (P-21) to 6061 and 6063 (P-23), in thickness range 0.125 to 0.516; filler metal is ER4043 (F-23); current is direct; shielding gas is helium.

Similar Records