Standard specification for low-carbon Ni--Mo--Cr alloy plate, sheet, and strip

Book · Mon Jan 01 00:00:00 EST 1973

OSTI ID:4340388

The products covered shall be supplied in the following conditions: (1) sheet and strip--hot- or cold-rolled, solution-heattreated, and descaled unless heated in an atmosphere yielding a bright finish; and (2) plate--hot-rolled, solution-heat-treated, and descaled. Plate material shall be 3/16 in. and over and sheet and strip under 3/16 in. in thickness. The Ni-base alloy chemical requirements are 14.5 to 18.5% Cr, 3.0 to 4.5% W, 4.0 to 7.0% Fe, 15.0 to 17.0% Mo, 2.5% max. Co, with other minor constituents under 1%. Mechanical properties, grain size, and permissible variations are specified in tables. (LMT)

• Research Organization: Originating Research Org. not identified
• NSA Number: NSA-29-018943
• OSTI ID: 4340388
• Report Number(s): ASTM-B-575-72
• Resource Relation: Other Information: Orig. Receipt Date: 30-JUN-74; Related Information: 1973 annual book of ASTM standards. Part 7
• Country of Publication: Country unknown/Code not available
• Language: English

Related Subjects

N50230* -Metals
Ceramics
& Other Materials-Metals & Alloys-Properties
Structure & Phase Studies
*CHROMIUM ALLOYS- SPECIFICATIONS
*COBALT ALLOYS- SPECIFICATIONS
*IRON ALLOYS- SPECIFICATIONS
*MOLYBDENUM ALLOYS- SPECIFICATIONS
*NICKEL BASE ALLOYS- SPECIFICATIONS
*TUNGSTEN ALLOYS- SPECIFICATIONS
CHEMICAL COMPOSITION
INSPECTION
MECHANICAL PROPERTIES
PLATES
SHEETS
STANDARDS
TESTING STANDARDS