Simulation of ratcheting in straight pipes using ANSYS with an improved cyclic plasticity model
- North Carolina State Univ., Raleigh, NC (United States). Center for Nuclear Power Plant Structure, Equipment and Piping
Ratcheting has been shown to be a contributing cause of failure in several seismic experiments on piping components and systems. Most commercial finite element codes have been unable to simulate the ratcheting in those tests accurately. The reason for this can be traced to inadequate plasticity constitutive models in the analysis codes. The authors have incorporated an improved cyclic plasticity model, based on an Armstrong-Frederick kinematic hardening rule in conjunction with the Drucker-Palgen plastic modulus equation, into an ANSYS user subroutine. This modified analysis code has been able to simulate quite accurately the ratcheting behavior of a tube subjected to a constant internal pressure and axially strain controlled cycling. This paper describes simulations obtained form this modified ANSYS code for two additional tests: (1) a tube subjected to constant axial stress and prescribed torsional cycling, and (2) a straight pipe subjected to constant internal pressure and quasi-static cyclic bending. The analysis results from the modified ANSYS code are compared to the experimental data, as well as results from ABAQUS and the original ANSYS code. The resulting correlation shows a significant improvement over the original ANSYS and the ABAQUS codes.
- OSTI ID:
- 404337
- Report Number(s):
- CONF-960706-; ISBN 0-7918-1787-3; TRN: 97:000454
- Resource Relation:
- Conference: American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montreal (Canada), 21-26 Jul 1996; Other Information: PBD: 1996; Related Information: Is Part Of Seismic engineering -- 1996. PVP-volume 340; Saleem, M.A. [ed.] [AECL, Mississauga, Ontario (Canada)]; Aggarwal, M.C. [ed.]; PB: 372 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
ASME code and ratcheting in piping components. Final technical report
On the incorporation of an improved cyclic plasticity model into a finite element code to simulate ratcheting in piping