Subsidence and well failure in the South Belridge Diatomite field
Withdrawal of fluids from shallow, thick and low strength rock can cause substantial reservoir compaction leading to surface subsidence and well failure. This is the case for the Diatomite reservoir, where over 10 ft of subsidence have occurred in some areas. Well failure rates have averaged over 3% per year, resulting in several million dollars per year in well replacement and repair costs in the South Belridge Diatomite alone. A program has been underway to address this issue, including experimental, modeling and field monitoring work. An updated elastoplastic rock law based on laboratory data has been generated which includes not only standard shear failure mechanisms but also irreversible pore collapse occurring at low effective stresses (<150 psi). This law was incorporated into a commercial finite element geomechanics simulator. Since the late 1980s, a network of level survey monuments has been used to monitor subsidence at Belridge. Model predictions of subsidence in Section 33 compare very well with field measured data, which show that water injection reduces subsidence from 7--8 inches per year to 1--2 inches per year, but does not abate well failure.
- OSTI ID:
- 403046
- Report Number(s):
- CONF-9603154-; TRN: IM9651%%81
- Resource Relation:
- Conference: 65. Society of Petroleum Engineers (SPE) western regional meeting, Bakersfield, CA (United States), 8-10 Mar 1996; Other Information: PBD: 1995; Related Information: Is Part Of 65. western regional meeting: Proceedings; PB: 637 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Geomechanical modeling of reservoir compaction, surface subsidence, and casing damage at the Belridge diatomite field
Three-dimensional geomechanical simulation of reservoir compaction and implications for well failures in the Belridge diatomite