The effect of plastic prestrain on the cavitation wear resistance of steels

Tsvetkov, Yu N

Title: The effect of plastic prestrain on the cavitation wear resistance of steels

Full Record
Other Related Research

Abstract

Plastic surface prestrain is shown to affect the cyclic durability of hydraulic machine parts, which, operating in contact with fluid stream, are exposed to periodic loading and cavitation impact. Cavitation failure can occur in both the low-cycle and high-cycle fatigue range. In the former case, surface cold working reduces the durability of machine parts, while in the latter, the durability can be improved only to a certain degree by plastic prestrain.

Authors:

Tsvetkov, Yu N ^[1]

St. Petersburg State Univ. (Russian Federation)

Publication Date:: Wed Feb 01 00:00:00 EST 1995

OSTI Identifier:: 391321

Resource Type:: Journal Article

Journal Name:: Industrial Laboratory

Additional Journal Information:: Journal Volume: 60; Journal Issue: 8; Other Information: PBD: Feb 1995; TN: Translated from Zavodskaya Laboratoriya; 60: No. 8, 50-55(Aug 1994)

Country of Publication:: United States

Language:: English

Subject:: 42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES; 36 MATERIALS SCIENCE; STEELS; STRESS ANALYSIS; MACHINE PARTS; STRAINS; PLASTICITY; FATIGUE; WEAR RESISTANCE; CAVITATION

Citation Formats


                    Tsvetkov, Yu N. The effect of plastic prestrain on the cavitation wear resistance of steels.  United States: N. p., 1995. 
        Web.

Copy to clipboard


                    Tsvetkov, Yu N. The effect of plastic prestrain on the cavitation wear resistance of steels.  United States.

Copy to clipboard


                    Tsvetkov, Yu N. 1995.  
        "The effect of plastic prestrain on the cavitation wear resistance of steels".  United States.

Copy to clipboard


                    
@article{osti_391321,

  title        = {The effect of plastic prestrain on the cavitation wear resistance of steels},

  author       = {Tsvetkov, Yu N},

  abstractNote = {Plastic surface prestrain is shown to affect the cyclic durability of hydraulic machine parts, which, operating in contact with fluid stream, are exposed to periodic loading and cavitation impact. Cavitation failure can occur in both the low-cycle and high-cycle fatigue range. In the former case, surface cold working reduces the durability of machine parts, while in the latter, the durability can be improved only to a certain degree by plastic prestrain.},

  doi          = {},

  url          = {https://www.osti.gov/biblio/391321},
  journal      = {Industrial Laboratory},
number       = 8,

  volume       = 60,

  place        = {United States},

  year         = {Wed Feb 01 00:00:00 EST 1995},

  month        = {Wed Feb 01 00:00:00 EST 1995}

}

Copy to clipboard

Journal Article:

Other availability

Find in Google Scholar

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

A metallurgical approach to improved cavitation-erosion resistance

Journal Article Richman, R; McNaughton, W - Journal of Materials Engineering and Performance

Although cavitation erosion in hydraulic systems is an old problem, the damage mechanism that culminates in material loss was not known with certainty until recently. An investigation is described that aimed at clarifying the damage mechanism in cavitation erosion and applying that knowledge to make hydraulic equipment more resistant to cavitation. Strong correlations were established between cyclic deformation (fatigue) parameters and cavitation-erosion rates. This identification facilitated the search for more resistant materials. Finite element modeling confirmed that localized impacts on metal surfaces produce fatigue like deformations and damage accumulation. Among available materials, near-equiatomic alloys of nickel and titanium are anomalouslymore »« less
https://doi.org/10.1007/s11665-997-0057-5
Results of investigating the effect of cavitation in hydroabrasive wear of elements of the water passageway of axial-flow pumps

Journal Article Mamazhonov, M; Denisov, A - Hydrotech. Constr.; (United States)

On-site observation of the operation of hydraulic machines and the long experience of operating and pumping stations show that abrasive and cavitation-abrasive wear play the main role in the failure of parts of hydraulic turbines and pumps operating on streams with a high turbidity. The effect of wear as a result of cavitation and the action of sediments are displayed as loss of efficiency of the machines and overconsumption of electric energy related to it, the need to conduct repair and restoration, and a decrease in the delivery of water as a consequence of an increase of the design gaps.more »« less
EFFECT OF STATIC PRESTRAIN ON THE PROT-FATIGUE PROPERTIES OF UNNOTCHED AND NOTCHED MATERIALS AT ROOM AND ELEVATED TEMPERATURE. Period covered: January 1956 to December 1957

Technical Report Vitovec, F

A study was conducted on the effect of short time and creep prestrain on the fatigue properties of unnotched and notched specimens of the alloys 7075-T6 extruded, 2024-T4 extruded, 16-25-6 hot-cold-worked, and S-816 solution treated and aged. Fatigue properties were determined using a Prot-type test with a single loading rate of 0.01 psi per cycle. The unnotched and notched specimens were prestrained at test temperature and then immediately subjected to a Prot- type fatigue test at the same temperature and in the same testing machine. The test temperature for the short time prestrain and creep prestrain, respectively, were 75 andmore »« less
Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower applications

Journal Article Jiang, Xiujuan; Overman, Nicole; Smith, Christopher; ... - Materials Today Communications

There is an urgent need for repair of hydropower components that have undergone damage due to cavitation. Conventional repair methods involve melting of materials and can deteriorate material properties and cause distortion. This study investigated the relevant properties of different materials using solid phase processing—cold spray technology. Stainless steel (SS) 316, Inconel 625 and CrC-NiCr materials were cold spray deposited onto base metal SS 316, respectively. Cold spray achieved dense uniform deposits with low level porosity, and intimate contact between the deposit and the base metal was observed. Severe plastic deformation imparted during the cold spray process resulted in significantmore »« less
https://doi.org/10.1016/j.mtcomm.2020.101305
Deterministic and probabilistic prediction of the distribution of inter-fiber failure test data of prestrained CFRP tubes composed of thin layers and loaded by radial pressure

Conference Cuntze, R

The limit of usability of a CFRP (Carbon Fiber Reinforced Plastics) structure is often determined by initiation of Inter Fiber Failure (IFF) indicated by interfibre/matrix cracking. It will be shown how this crack initiation threshold can be delayed. The process used is prestraining in analogy to that of prestressed concrete inducing advantageous compression built in stresses/strains transverse to the fibres. As a certain structural example cylindrical tube specimens were wound, prestrained by hydraulic pressurization, and then loaded while monitoring acoustic emission. Crack counting followed the sectioning of the tube. The theoretical investigations aimed at both a deterministic and a probabilisticmore »« less

Similar Records