Brazing copper to dispersion-strengthened copper
The Advanced Photon Source (APS) is a state-of-the-art synchrotron light source that will produce intense x-ray beams, which will allow the study of smaller samples and faster reactions and processes at a greater level of detail that has been possible to date. The beam is produced by using third-generation insertion devices in a 7 GeV electron/positron storage ring that is 1100 meters in circumference. The heat load from these intense high power devices is very high and certain components must sustain total heat loads of 3 to 15 kW and heat fluxes of 30 W/mm{sup 2}. Because the beams will cycle on and off many times, thermal shock and fatigue will be a problem. High heat flux impinging on a small area causes a large thermal gradient that results in high stress. GlidCop{reg_sign}, a dispersion strengthened copper, is the desired material because of its high thermal conductivity and superior mechanical properties as compared to copper and its alloys. GlidCop is not amenable to joining by fusion welding, and brazing requires diligence because of high diffusivity. Brazing procedures were developed using optical and scanning electron microscopy.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 373767
- Report Number(s):
- ANL/XFD/CP-90595; CONF-960848-5; ON: DE96013605
- Resource Relation:
- Conference: Denver `96: 1. conference on space processing of materials, at SPIE International Society for Optical Engineering (SPIE) annual international symposium on optical science, engineering, and instrumentation, Denver, CO (United States), 4-9 Aug 1996; Other Information: PBD: [1996]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low-cycle-fatigue behavior of copper materials and their use in synchrotron beamline components
Brazed dispersion strengthened copper: The effect of neutron irradiation and transmutation on bond integrity