Effect of interactions between bubbles and graphite particles in copper alloy melts on microstructure formed during centrifugal casting. Part 2: Experiments
- Univ. of Wisconsin, Milwaukee, WI (United States). Material Dept.
During centrifugal casting of copper alloys containing graphite particles, both particles and bubbles move under the influence of centrifugal forces and influence the final microstructure, including porosity and the distribution of graphite. The movement of graphite particles and bubbles in the melts of copper alloys, originally containing 7 and 13 vol pct graphite particles and centrifugally cast at 800 and 1900 rpm in horizontal rotating molds, has been examined. Microstructural observations of sections of these centrifugal castings show that the graphite particles are segregated near the inner periphery and the amount of porosity in the graphite-rich zone is higher than the porosity in the graphite-free and transition zones. The intimate association of porosity with graphite particles in the graphite-rich zone was explained on the basis of attachment of graphite particles to bubbles in the melt and the viscosity of the melt, which increases with increasing concentration of graphite particles near the inner periphery of the castings. It was found that the amount of the porosity in the graphite-rich zone increases with volume fraction of graphite particles used in this study; the size of the porosity in the graphite-rich zone also increases with increasing rotational speed of the mold. This suggests that the graphite particles and bubbles were attached to each other in the melt and they did not get separated during centrifugal casting conditions of the present study. The present experiments qualitatively confirm theoretical computations.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 364009
- Journal Information:
- Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Vol. 30, Issue 3; Other Information: PBD: Jun 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Transient thermal analysis of solidification in a centrifugal casting for composite materials containing particle segregation
Development of lead-free copper alloy graphite castings. Annual report for the period January through December 1996