The use of high temperature heat exchangers to increase power plant thermal efficiency
- Univ. of Sheffield (United Kingdom). Dept. of Mechanical Engineering
The thermal efficiency of conventional fossil fueled steam power plant can be increased up to 55% by increasing the steam turbine inlet temperature to 1,300 C at steam pressures in the range 50 b--200 b, resulting in a large reduction in carbon dioxide emissions per unit power output. A novel superheater shell and tube heat exchanger with ceramic tubes can be used to produce steam at the above temperature and pressure conditions. The feasibility of the heat exchanger depends upon the high temperature properties of suitable ceramic materials. Investigations have revealed that pressure-less sintered silicon carbide possesses suitable material properties for this particular application. The design proposed results in a mean temperature within the heat transfer tubes of approximately 1,450--1,550 C. With current steam power plants having total installed power output capacities usually in the range of 50 MW to 1,000 MW, a preliminary design of a ceramic heat exchanger was undertaken for a 345 MW superheater thermal capacity. At the desired temperatures and pressures it was concluded that for this situation, ceramic heat exchanger units of 14 MW thermal capacity would be feasible.
- OSTI ID:
- 347579
- Report Number(s):
- CONF-970701-; TRN: IM9923%%116
- Resource Relation:
- Conference: 32. intersociety energy conversion engineering conference, Honolulu, HI (United States), 27 Jul - 2 Aug 1997; Other Information: PBD: [1997]; Related Information: Is Part Of Proceedings of the thirty-second intersociety energy conversion engineering conference. Volume 3: Energy systems, renewable energy resources, environmental impact and policy impacts on energy; PB: 683 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Repowering of the Peterhead Power Station provides operating flexibility, increased efficiency and emission reduction
Evaluation of Dry Sorbent Injection Technology for Pre-Combustion CO{sub 2} Capture