An all solid state pulse power source for high PRF induction accelerators
Researchers at the Lawrence Livermore National Laboratory (LLNL) are developing a flexible, all solid-state pulsed power source that will enable an induction accelerator to produce mulitkiloampere electron beams at a maximum pulse repetition frequency (prf) of 2 MHz. The prototype source consists of three, 15-kV, 4.8-kA solid-state modulators stacked in an induction adder configuration. Each modulator contains over 1300 field-effect transistors (FETs) that quickly connect and disconnect four banks of energy storage capacitors to a magnetic induction core. The FETs are commanded on and off by an optical signal that determines the duration of the accelerating pulse. Further electronic circuitry is provided that resets the magnetic cores in each modulator immediately after the accelerating pulse. The system produces bursts of five or more pulses with an adjustable pulse width that ranges from 200 ns to 2 {micro}s The pulse duty factor within a burst can be as high as 25% while still allowing time for the induction core to reset. The solid-state modulator described above is called ARM-II and is named for the Advanced Radiographic Machine (ARM)-a powerful radiographic accelerator that will be the principal diagnostic device for the future Advanced Hydrotest Facility (AHF).
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 304797
- Report Number(s):
- UCRL-JC-130691; CONF-980665-; ON: DE98058828; BR: DP0102015; CNN: W-7405-Eng-48; TRN: 99:002186
- Resource Relation:
- Conference: 23. international power modulator symposium, Rancho Mirage, CA (United States), 22 Jun 1998; Other Information: PBD: 1 Jun 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
The scrounge-atron: a phased approach to the advanced hydrotest facility utilizing proton radiography
A review of accelerator concepts for the Advanced Hydrotest Facility