Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Organic Photovoltaic Performance Resiliency: Role of Molecular Weight in a PM7 Derivative

Journal Article · · ACS Energy Letters
 [1];  [2];  [3];  [4];  [1];  [1];  [1];  [1];  [4];  [5];  [6];  [6];  [2];  [1]
  1. Center for Polymers and Organic Solids, Department of Chemistry and Biochemistry, University of California Santa Barbara (UCSB), Santa Barbara, California 93106, United States
  2. School of Chemistry and Biochemistry, School of Materials Science and Engineering, Center for Organic Photonics and Electronics, Georgia Tech Polymer Network, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
  3. Materials Science and Engineering, University of Colorado, Boulder, Colorado 80309, United States
  4. Renewable and Sustainable Energy Institute, University of Colorado Boulder, Boulder, Colorado 80303, United States
  5. Department of Physics, School of Sciences and Humanities, Nazarbayev University, 010000 Astana, Republic of Kazakhstan
  6. Materials Science and Engineering, University of Colorado, Boulder, Colorado 80309, United States; Department of Chemical and Biological Engineering, University of Colorado, Boulder, Colorado 80309, United States; Renewable and Sustainable Energy Institute, University of Colorado Boulder, Boulder, Colorado 80303, United States
Not provided.
Research Organization:
Brookhaven National Laboratory (BNL), Upton, NY (United States). National Synchrotron Light Source II (NSLS-II)
Sponsoring Organization:
USDOE Office of Science (SC)
DOE Contract Number:
SC0012704
OSTI ID:
2425492
Journal Information:
ACS Energy Letters, Journal Name: ACS Energy Letters Journal Issue: 8 Vol. 8; ISSN 2380-8195
Publisher:
American Chemical Society (ACS)
Country of Publication:
United States
Language:
English

References (48)

From Monomer to Conjugated Polymer: A Perspective on Best Practices for Synthesis journal June 2021
Controlling Solution-Phase Polymer Aggregation with Molecular Weight and Solvent Additives to Optimize Polymer-Fullerene Bulk Heterojunction Solar Cells journal March 2014
Effect of molecular weight on morphology and photovoltaic properties in P3HT:PCBM solar cells journal June 2015
The Intrinsic Role of Molecular Mass and Polydispersity Index in High‐Performance Non‐Fullerene Polymer Solar Cells journal November 2020
2,2′-Bis(1,3,4-thiadiazole)-Based π-Conjugated Copolymers for Organic Photovoltaics with Exceeding 8% and Its Molecular Weight Dependence of Device Performance journal January 2017
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology journal May 2022
Blending Donors with Different Molecular Weights: An Efficient Strategy to Resolve the Conflict between Coherence Length and Intermixed Phase in Polymer/Nonfullerene Solar Cells journal November 2021
High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy journal July 2021
Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells journal October 2009
Oxygen-Induced Doping as a Degradation Mechanism in Highly Efficient Organic Solar Cells journal February 2019
Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor journal March 2018
Understanding the High Performance of over 15% Efficiency in Single‐Junction Bulk Heterojunction Organic Solar Cells journal October 2019
Reversible and irreversible degradation of organic solar cell performance by oxygen journal June 2011
The role of bulk and interfacial morphology in charge generation, recombination, and extraction in non-fullerene acceptor organic solar cells journal January 2020
Water and oxygen induced degradation of small molecule organic solar cells journal May 2011
Barrierless Free Charge Generation in the High‐Performance PM6:Y6 Bulk Heterojunction Non‐Fullerene Solar Cell journal January 2020
Molecular Weight Effect on the Absorption, Charge Carrier Mobility, and Photovoltaic Performance of an Indacenodiselenophene-Based Ladder-Type Polymer journal July 2013
Design of a MoO x /Au/MoO x transparent electrode for high-performance OLEDs journal September 2016
Efficient solar cells are more stable: the impact of polymer molecular weight on performance of organic photovoltaics journal January 2016
Conjugated Polymers Via Direct Arylation Polymerization in Continuous Flow: Minimizing the Cost and Batch‐to‐Batch Variations for High‐Throughput Energy Conversion journal October 2017
Influence of Molecular Weight on the Performance of Organic Solar Cells Based on a Fluorene Derivative journal June 2010
Electrical Instability Induced by Electron Trapping in Low-Bandgap Donor-Acceptor Polymer Field-Effect Transistors journal October 2015
Role of Molecular Weight Distribution on Charge Transport in Semiconducting Polymers journal October 2014
Molecular Weight-Dependent Physical and Photovoltaic Properties of Poly(3-alkylthiophene)s with Butyl, Hexyl, and Octyl Side-Chains journal October 2021
A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6% journal July 2021
Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double‐Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells journal September 2020
High-Performance Nonfullerene Organic Photovoltaic Cells Using a TPD-Based Wide Bandgap Donor Polymer journal July 2019
Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals journal January 2022
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core journal April 2019
Molecular weight dependent vertical composition profiles of PCDTBT:PC71BM blends for organic photovoltaics journal June 2014
Solid-State Lighting: A Concise Review of the State of the Art on LED and OLED Modeling journal June 2015
Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells journal May 2021
Batch-to-Batch Variation of Polymeric Photovoltaic Materials: its Origin and Impacts on Charge Carrier Transport and Device Performances journal July 2014
Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale journal June 2012
Achieving over 16% efficiency for single-junction organic solar cells journal March 2019
Stepwise heating in Stille polycondensation toward no batch-to-batch variations in polymer solar cell performance journal May 2018
Dependence of Regioregular Poly(3-hexylthiophene) Film Morphology and Field-Effect Mobility on Molecular Weight journal April 2005
Tuning Aggregation Behavior of Polymer Donor via Molecular‐Weight Control for Achieving 17.1% Efficiency Inverted Polymer Solar Cells journal June 2021
Elucidating the impact of molecular weight on morphology, charge transport, photophysics and performance of all-polymer solar cells journal January 2020
Batch-to-Batch Variation: A Key Component for Modeling Chemical Manufacturing Processes journal November 2014
Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces journal March 2020
Controlling the Field-Effect Mobility of Regioregular Polythiophene by Changing the Molecular Weight journal September 2003
Reproducibility in Time and Space—The Molecular Weight Effects of Polymeric Materials in Organic Photovoltaic Devices journal April 2022
Elucidating Batch-to-Batch Variation Caused by Homocoupled Side Products in Solution-Processable Organic Solar Cells journal December 2016
Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics journal December 2016
Effect of Palladium‐Tetrakis(Triphenylphosphine) Catalyst Traces on Charge Recombination and Extraction in Non‐Fullerene‐based Organic Solar Cells journal February 2021
Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing journal June 2018
18.77 % Efficiency Organic Solar Cells Promoted by Aqueous Solution Processed Cobalt(II) Acetate Hole Transporting Layer journal September 2021

Similar Records

Ester-functionalized, wide-bandgap derivatives of PM7 for simultaneous enhancement of photovoltaic performance and mechanical robustness of all-polymer solar cells
Journal Article · 2021 · Journal of Materials Chemistry. A · OSTI ID:1759159

Molecular Semiconductors in Organic Photovoltaic Cells
Journal Article · 2009 · Chemical Reviews · OSTI ID:1079726

Impact of Polymer Molecular Weight on Polymeric Photodiodes
Journal Article · 2021 · Advanced Optical Materials · OSTI ID:1981360