3D Printing of Aramid Nanofiber Composites by Stereolithography

Perera, Sachini D.; Durand-Silva, Alejandra; Remy, Ashele K.; Diwakara, Shashini D.; Smaldone, Ronald A.

doi:10.1021/acsanm.1c03843

3D Printing of Aramid Nanofiber Composites by Stereolithography

Journal Article · 03 February 2022 · ACS Applied Nano Materials

DOI:https://doi.org/10.1021/acsanm.1c03843· OSTI ID:2425019

Perera, Sachini D. ^[1]; ^[1]; Remy, Ashele K. ^[1]; Diwakara, Shashini D. ^[1]; ^[1]

Department of Chemistry and Biochemistry, University of Texas at Dallas, 800 West Campbell Road, Richardson, Texas 75080, United States

Not provided.

Research Organization:: Univ. of Texas, Dallas, TX (United States)

Sponsoring Organization:: USDOE

OSTI ID:: 2425019

Journal Information:: ACS Applied Nano Materials, Journal Name: ACS Applied Nano Materials Journal Issue: 10 Vol. 5; ISSN 2574-0970

Publisher:: American Chemical Society (ACS)

Country of Publication:: United States

Language:: English

References (42)

Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties Wan, Yan-Jun; Tang, Long-Cheng; Gong, Li-Xiu Carbon, Vol. 69 https://doi.org/10.1016/j.carbon.2013.12.050	journal	April 2014
Strong yet tough, excellent thermal resistant and UV-Protective Polydopamine/Poly(vinyl alcohol) composites via hydrogen-bonding interaction Xiong, Shuqiang; Zhang, Chongyin; Huang, Ruijie Polymer, Vol. 221 https://doi.org/10.1016/j.polymer.2021.123603	journal	April 2021
Aramid Nanofiber Membranes Reinforced by MXene Nanosheets for Recovery of Dyes from Textile Wastewater Li, Yang; Dai, Ruobin; Zhou, Huimin ACS Applied Nano Materials, Vol. 4, Issue 6 https://doi.org/10.1021/acsanm.1c01217	journal	June 2021
Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals Kumar, Sandeep; Hofmann, Manfred; Steinmann, Bettina ACS Applied Materials & Interfaces, Vol. 4, Issue 10 https://doi.org/10.1021/am301321v	journal	October 2012
The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites Suryanegara, Lisman; Nakagaito, Antonio Norio; Yano, Hiroyuki Composites Science and Technology, Vol. 69, Issue 7-8 https://doi.org/10.1016/j.compscitech.2009.02.022	journal	June 2009
Strong and Stiff Aramid Nanofiber/Carbon Nanotube Nanocomposites Zhu, Jiaqi; Cao, Wenxin; Yue, Mingli ACS Nano, Vol. 9, Issue 3 https://doi.org/10.1021/nn504927e	journal	February 2015
Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites Maldas, D.; Kokta, B. V.; Daneault, C. Journal of Applied Polymer Science, Vol. 37, Issue 3 https://doi.org/10.1002/app.1989.070370313	journal	January 1989
110th Anniversary : Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design Appuhamillage, Gayan A.; Chartrain, Nicholas; Meenakshisundaram, Viswanath Industrial & Engineering Chemistry Research, Vol. 58, Issue 33 https://doi.org/10.1021/acs.iecr.9b02679	journal	July 2019
Aramid Nanofiber Reinforced Polymer Nanocomposites via Amide–Amide Hydrogen Bonding Nasser, Jalal; Zhang, Lisha; Lin, Jiajun ACS Applied Polymer Materials, Vol. 2, Issue 7 https://doi.org/10.1021/acsapm.0c00430	journal	June 2020
Balancing Self-Healing and Shape Stability in Dynamic Covalent Photoresins for Stereolithography 3D Printing Durand-Silva, Alejandra; Cortés-Guzmán, Karen P.; Johnson, Rebecca M. ACS Macro Letters, Vol. 10, Issue 4 https://doi.org/10.1021/acsmacrolett.1c00121	journal	April 2021
On the Effect of Ultralow Loading of Microwave-Assisted Bifunctionalized Graphene Oxide in Stereolithographic 3D-Printed Nanocomposites Ramírez-Soria, Edgar-Homero; Bonilla-Cruz, José; Flores-Amaro, Monica Gabriela ACS Applied Materials & Interfaces, Vol. 12, Issue 43 https://doi.org/10.1021/acsami.0c13702	journal	October 2020
3D printing of polymer matrix composites: A review and prospective Wang, Xin; Jiang, Man; Zhou, Zuowan Composites Part B: Engineering, Vol. 110 https://doi.org/10.1016/j.compositesb.2016.11.034	journal	February 2017
Three‐dimensional chemical reactors: in situ materials synthesis to advance vat photopolymerization Yee, Daryl W.; Greer, Julia R. Polymer International, Vol. 70, Issue 7 https://doi.org/10.1002/pi.6165	journal	January 2021
Aramid nanofibers reinforced polyvinyl alcohol/tannic acid hydrogel with improved mechanical and antibacterial properties for potential application as wound dressing Guo, Yuqing; An, Xiaoli; Fan, Zengjie Journal of the Mechanical Behavior of Biomedical Materials, Vol. 118 https://doi.org/10.1016/j.jmbbm.2021.104452	journal	June 2021
Electrical and mechanical properties of polyimide–carbon nanotubes composites fabricated by in situ polymerization Jiang, Xiaowen; Bin, Yuezhen; Matsuo, Masaru Polymer, Vol. 46, Issue 18 https://doi.org/10.1016/j.polymer.2005.05.127	journal	August 2005
Hydrogen Bond Networks in Graphene Oxide Composite Paper: Structure and Mechanical Properties Medhekar, Nikhil V.; Ramasubramaniam, Ashwin; Ruoff, Rodney S. ACS Nano, Vol. 4, Issue 4 https://doi.org/10.1021/nn901934u	journal	March 2010
Recent developments in 3D printable composite materials Kalsoom, Umme; Nesterenko, Pavel N.; Paull, Brett RSC Advances, Vol. 6, Issue 65 https://doi.org/10.1039/C6RA11334F	journal	January 2016
3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography Palaganas, Napolabel B.; Mangadlao, Joey Dacula; de Leon, Al Christopher C. ACS Applied Materials & Interfaces, Vol. 9, Issue 39 https://doi.org/10.1021/acsami.7b09223	journal	April 2017
Dispersions of Aramid Nanofibers: A New Nanoscale Building Block Yang, Ming; Cao, Keqin; Sui, Lang ACS Nano, Vol. 5, Issue 9 https://doi.org/10.1021/nn2014003	journal	August 2011
Hierarchical ordering in light-triggered additive manufacturing Monti, Joël; Blasco, Eva Polymer Chemistry, Vol. 11, Issue 46 https://doi.org/10.1039/D0PY01077D	journal	January 2020
Isolation of Aramid Nanofibers for High Strength and Toughness Polymer Nanocomposites Lin, Jiajun; Bang, Sun Hwi; Malakooti, Mohammad H. ACS Applied Materials & Interfaces, Vol. 9, Issue 12 https://doi.org/10.1021/acsami.7b01488	journal	March 2017
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties Chen, Qiyi; Mangadlao, Joey Dacula; Wallat, Jaqueline ACS Applied Materials & Interfaces, Vol. 9, Issue 4 https://doi.org/10.1021/acsami.6b11793	journal	January 2017
Nanofibrous Kevlar Aerogel Films and Their Phase-Change Composites for Highly Efficient Infrared Stealth Lyu, Jing; Liu, Zengwei; Wu, Xiaohan ACS Nano, Vol. 13, Issue 2 https://doi.org/10.1021/acsnano.8b08913	journal	January 2019
Nanocomposite materials for fused filament fabrication Patel, Abhishek; Taufik, Mohammad Materials Today: Proceedings, Vol. 47 https://doi.org/10.1016/j.matpr.2021.05.438	journal	January 2021
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing Weng, Zixiang; Wang, Jianlei; Senthil, T. Materials & Design, Vol. 102 https://doi.org/10.1016/j.matdes.2016.04.045	journal	July 2016
Graphene oxide as multi-functional initiator and effective molecular reinforcement in PVP/epoxy composites Jayan, Jitha S.; Pal, Kaushik; Saritha, Appukuttan Journal of Molecular Structure, Vol. 1230 https://doi.org/10.1016/j.molstruc.2021.129873	journal	April 2021
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges Ngo, Tuan D.; Kashani, Alireza; Imbalzano, Gabriele Composites Part B: Engineering, Vol. 143 https://doi.org/10.1016/j.compositesb.2018.02.012	journal	June 2018
Water-Rich Biomimetic Composites with Abiotic Self-Organizing Nanofiber Network Xu, Lizhi; Zhao, Xueli; Xu, Chuanlai Advanced Materials, Vol. 30, Issue 1 https://doi.org/10.1002/adma.201703343	journal	November 2017
Supramolecular tools for polymer additive manufacturing Berry, Danielle R.; Cortés-Guzmán, Karen P.; Durand-Silva, Alejandra MRS Communications, Vol. 11, Issue 2 https://doi.org/10.1557/s43579-021-00037-9	journal	April 2021
Photopolymerization in 3D Printing Bagheri, Ali; Jin, Jianyong ACS Applied Polymer Materials, Vol. 1, Issue 4 https://doi.org/10.1021/acsapm.8b00165	journal	February 2019
Mechanically Strong Graphene/Aramid Nanofiber Composite Electrodes for Structural Energy and Power Kwon, Se Ra; Harris, John; Zhou, Tianyang ACS Nano, Vol. 11, Issue 7 https://doi.org/10.1021/acsnano.7b00790	journal	July 2017
Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties Mathur, R. B.; Chatterjee, Sourav; Singh, B. P. Composites Science and Technology, Vol. 68, Issue 7-8 https://doi.org/10.1016/j.compscitech.2008.02.020	journal	June 2008
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide Wan, Yan-Jun; Gong, Li-Xiu; Tang, Long-Cheng Composites Part A: Applied Science and Manufacturing, Vol. 64 https://doi.org/10.1016/j.compositesa.2014.04.023	journal	September 2014
Stretchable conductors by kirigami patterning of aramid-silver nanocomposites with zero conductance gradient Lyu, Jing; Hammig, Mark D.; Liu, Lehao Applied Physics Letters, Vol. 111, Issue 16 https://doi.org/10.1063/1.5001094	journal	October 2017
3D printing of discontinuous and continuous fibre composites using stereolithography Sano, Yukako; Matsuzaki, Ryosuke; Ueda, Masahito Additive Manufacturing, Vol. 24 https://doi.org/10.1016/j.addma.2018.10.033	journal	December 2018
Polymers for 3D Printing and Customized Additive Manufacturing Ligon, Samuel Clark; Liska, Robert; Stampfl, Jürgen Chemical Reviews, Vol. 117, Issue 15 https://doi.org/10.1021/acs.chemrev.7b00074	journal	July 2017
Aramid nanofibers and poly (vinyl alcohol) nanocomposites for ideal combination of strength and toughness via hydrogen bonding interactions Guan, Yu; Li, Wang; Zhang, Yuliang Composites Science and Technology, Vol. 144 https://doi.org/10.1016/j.compscitech.2017.03.010	journal	May 2017
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications Yu, Claire; Schimelman, Jacob; Wang, Pengrui Chemical Reviews, Vol. 120, Issue 19 https://doi.org/10.1021/acs.chemrev.9b00810	journal	April 2020
A review on additive manufacturing of polymer-fiber composites Parandoush, Pedram; Lin, Dong Composite Structures, Vol. 182 https://doi.org/10.1016/j.compstruct.2017.08.088	journal	December 2017
Hierarchical composites of carbon nanotubes on carbon fiber: Influence of growth condition on fiber tensile properties Zhang, Qiuhong; Liu, Jianwei; Sager, Ryan Composites Science and Technology, Vol. 69, Issue 5 https://doi.org/10.1016/j.compscitech.2008.12.002	journal	April 2009
Tough and Multifunctional Composite Film Actuators Based on Cellulose Nanofibers toward Smart Wearables Wei, Jie; Jia, Shuai; Wei, Jie ACS Applied Materials & Interfaces, Vol. 13, Issue 32 https://doi.org/10.1021/acsami.1c09653	journal	August 2021
Composite rapid prototyping: overcoming the drawback of poor mechanical properties Karalekas, D.; Antoniou, K. Journal of Materials Processing Technology, Vol. 153-154 https://doi.org/10.1016/j.jmatprotec.2004.04.019	journal	November 2004

Similar Records

Stereolithography 3D Printing of Lignin-Reinforced Composites with Enhanced Mechanical Properties

Journal Article · 2019 · ACS Omega · OSTI ID:1606675

Branched Aramid Nanofibers

Journal Article · 2017 · Angewandte Chemie (International Edition) · OSTI ID:1533106

Branched Aramid Nanofibers

Journal Article · 2017 · Angewandte Chemie · OSTI ID:1375531

Related Subjects

Materials Science
Science & Technology - Other Topics

3D Printing of Aramid Nanofiber Composites by Stereolithography

Citation Formats

References (42)

Similar Records

Related Subjects