4D Photopolymers Derived From Ring-Opening Copolymerization of Cyclic Anhydrides and Limonene Oxide

Brooks, Scott; Merckle, David; Weems, Andrew C.

doi:10.1021/acssuschemeng.3c00377

4D Photopolymers Derived From Ring-Opening Copolymerization of Cyclic Anhydrides and Limonene Oxide

Journal Article · 05 July 2023 · ACS Sustainable Chemistry & Engineering

DOI:https://doi.org/10.1021/acssuschemeng.3c00377· OSTI ID:2424357

Brooks, Scott ^[1]; Merckle, David ^[2]; ^[3]

Department of Mechanical Engineering, Ohio University, Athens, Ohio 45701, United States
Translational Biomedical Sciences, Ohio University, Athens, Ohio 45701, United States
Department of Mechanical Engineering, Ohio University, Athens, Ohio 45701, United States; Translational Biomedical Sciences, Ohio University, Athens, Ohio 45701, United States; Molecular and Cellular Biology, Biomedical Engineering, Ohio Musculoskeletal and Neurological Institute, Ohio University, Athens, Ohio 45701, United States

Not provided.

Research Organization:: Ohio Univ., Athens, OH (United States)

Sponsoring Organization:: USDOE

OSTI ID:: 2424357

Journal Information:: ACS Sustainable Chemistry & Engineering, Journal Name: ACS Sustainable Chemistry & Engineering Journal Issue: 28 Vol. 11; ISSN 2168-0485

Publisher:: American Chemical Society (ACS)

Country of Publication:: United States

Language:: English

References (75)

Photoinitiated cationic polymerization of limonene 1,2‐oxide and α‐pinene oxide Park, Han Jin; Ryu, Chang Y.; Crivello, James V. Journal of Polymer Science Part A: Polymer Chemistry, Vol. 51, Issue 1 https://doi.org/10.1002/pola.26280	journal	August 2012
3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing Guggenbiller, Grant; Brooks, Scott; King, Olivia ACS Applied Polymer Materials, Vol. 5, Issue 5 https://doi.org/10.1021/acsapm.2c02171	journal	April 2023
Aqueous cationic homo- and co-polymerizations of β-myrcene and styrene: a green route toward terpene-based rubbery polymers Hulnik, Maksim I.; Vasilenko, Irina V.; Radchenko, Alexei V. Polymer Chemistry, Vol. 9, Issue 48 https://doi.org/10.1039/C8PY01378K	journal	January 2018
Sustainable polymers from renewable resources Zhu, Yunqing; Romain, Charles; Williams, Charlotte K. Nature, Vol. 540, Issue 7633 https://doi.org/10.1038/nature21001	journal	December 2016
Photopolymerization of Acrylated Epoxidized Soybean Oil: A Photocalorimetry-Based Kinetic Study Kousaalya, Adhimoolam Bakthavachalam; Ayalew, Beshah; Pilla, Srikanth ACS Omega, Vol. 4, Issue 26 https://doi.org/10.1021/acsomega.9b02680	journal	December 2019
From terpenes to sustainable and functional polymers Della Monica, Francesco; Kleij, Arjan W. Polymer Chemistry, Vol. 11, Issue 32 https://doi.org/10.1039/D0PY00817F	journal	January 2020
Semiaromatic Polyesters Derived from Renewable Terpene Oxides with High Glass Transitions Peña Carrodeguas, Leticia; Martín, Carmen; Kleij, Arjan W. Macromolecules, Vol. 50, Issue 14 https://doi.org/10.1021/acs.macromol.7b00862	journal	July 2017
Catalytic Ring-Opening Copolymerization of Fatty Acid Epoxides: Access to Functional Biopolyesters Brandolese, Arianna; Della Monica, Francesco; Pericàs, Miquel À. Macromolecules, Vol. 55, Issue 7 https://doi.org/10.1021/acs.macromol.2c00321	journal	March 2022
Tapered Multiblock Copolymers Based on Farnesene and Styrene: Impact of Biobased Polydiene Architectures on Material Properties Wahlen, Christian; Blankenburg, Jan; von Tiedemann, Philipp Macromolecules, Vol. 53, Issue 23 https://doi.org/10.1021/acs.macromol.0c02118	journal	November 2020
3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties Luo, Yuanyuan; Le Fer, Gaëlle; Dean, David Biomacromolecules, Vol. 20, Issue 4 https://doi.org/10.1021/acs.biomac.9b00076	journal	February 2019
Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler Fico, Daniela; Rizzo, Daniela; De Carolis, Valentina Polymers, Vol. 14, Issue 18 https://doi.org/10.3390/polym14183756	journal	September 2022
Ring Opening Copolymerization of Four-Dimensional Printed Shape Memory Polyester Photopolymers Using Digital Light Processing Merckle, David; Constant, Eric; Cartwright, Zachary Macromolecules, Vol. 54, Issue 6 https://doi.org/10.1021/acs.macromol.0c02401	journal	March 2021
Epoxy–amine oligomers from terpenes with applications in synergistic antifungal treatments O’Brien, Dara M.; Vallieres, Cindy; Alexander, Cameron Journal of Materials Chemistry B, Vol. 7, Issue 34 https://doi.org/10.1039/C9TB00878K	journal	January 2019
Stereoselective polymerization of biosourced terpenes β-myrcene and β-ocimene and their copolymerization with styrene promoted by titanium catalysts Naddeo, Marco; Buonerba, Antonio; Luciano, Ermanno Polymer, Vol. 131 https://doi.org/10.1016/j.polymer.2017.10.028	journal	November 2017
3D-Printed PCL/PLA Composite Stents: Towards a New Solution to Cardiovascular Problems Guerra, Antonio J.; Cano, Paula; Rabionet, Marc Materials, Vol. 11, Issue 9 https://doi.org/10.3390/ma11091679	journal	September 2018
Tandem synthesis of alternating polyesters from renewable resources Robert, Carine; de Montigny, Frédéric; Thomas, Christophe M. Nature Communications, Vol. 2, Issue 1 https://doi.org/10.1038/ncomms1596	journal	September 2011
Synthesis of high molecular weight L-Polylactic acid (PLA) by reactive extrusion at a pilot plant scale: Influence of 1,12-dodecanediol and di(trimethylol propane) as initiators Viamonte-Aristizábal, Sandra; García-Sancho, Amador; Arrabal Campos, Francisco M. European Polymer Journal, Vol. 161 https://doi.org/10.1016/j.eurpolymj.2021.110818	journal	December 2021
Terpene polyacrylate TPA5 shows favorable molecular hydrodynamic properties as a potential bioinspired archaeological wood consolidant Cutajar, Michelle; Andriulo, Fabrizio; Thomsett, Megan R. Scientific Reports, Vol. 11, Issue 1 https://doi.org/10.1038/s41598-021-86543-1	journal	April 2021
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life Castro-Aguirre, E.; Iñiguez-Franco, F.; Samsudin, H. Advanced Drug Delivery Reviews, Vol. 107 https://doi.org/10.1016/j.addr.2016.03.010	journal	December 2016
Bioderived 4D Printable Terpene Photopolymers from Limonene and β-Myrcene Constant, Eric; King, Olivia; Weems, Andrew C. Biomacromolecules, Vol. 23, Issue 6 https://doi.org/10.1021/acs.biomac.2c00085	journal	May 2022
Biobased Terpene Derivatives: Stiff and Biocompatible Compounds to Tune Biodegradability and Properties of Poly(butylene succinate) Zeinali, Reza; del Valle, Luis J.; Franco, Lourdes Polymers, Vol. 14, Issue 1 https://doi.org/10.3390/polym14010161	journal	December 2021
Ring-Opening Copolymerization of Four-Dimensional Printable Polyesters Using Supramolecular Thiourea/Organocatalysis Merckle, David; King, Olivia; Weems, Andrew C. ACS Sustainable Chemistry & Engineering, Vol. 11, Issue 6 https://doi.org/10.1021/acssuschemeng.2c05552	journal	January 2023
High elasticity, chemically recyclable, thermoplastics from bio-based monomers: carbon dioxide, limonene oxide and ε-decalactone Carrodeguas, Leticia Peña; Chen, Thomas T. D.; Gregory, Georgina L. Green Chemistry, Vol. 22, Issue 23 https://doi.org/10.1039/D0GC02295K	journal	January 2020
Terpolymers Derived from Limonene Oxide and Carbon Dioxide: Access to Cross-Linked Polycarbonates with Improved Thermal Properties Martín, Carmen; Kleij, Arjan W. Macromolecules, Vol. 49, Issue 17 https://doi.org/10.1021/acs.macromol.6b01449	journal	September 2016
Thiol-Based Three-Dimensional Printing of Fully Degradable Poly(propylene fumarate) Star Polymers Kirillova, Alina; Yeazel, Taylor R.; Gall, Ken ACS Applied Materials & Interfaces, Vol. 14, Issue 34 https://doi.org/10.1021/acsami.2c06553	journal	August 2022
Bio-derived polymers for coating applications: comparing poly(limonene carbonate) and poly(cyclohexadiene carbonate) Stößer, Tim; Li, Chunliang; Unruangsri, Junjuda Polymer Chemistry, Vol. 8, Issue 39 https://doi.org/10.1039/C7PY01223C	journal	January 2017
Low‐Viscosity Limonene Dimethacrylate as a Bio‐Based Alternative to Bisphenol A‐Based Acrylic Monomers for Photocurable Thermosets and 3D Printing Schimpf, Vitalij; Asmacher, Anne; Fuchs, Andre Macromolecular Materials and Engineering, Vol. 305, Issue 8 https://doi.org/10.1002/mame.202000210	journal	June 2020
3D printing of resorbable poly(propylene fumarate) tissue engineering scaffolds Childers, Erin P.; Wang, Martha O.; Becker, Matthew L. MRS Bulletin, Vol. 40, Issue 2 https://doi.org/10.1557/mrs.2015.2	journal	February 2015
Polymers of Limonene Oxide and Carbon Dioxide: Polycarbonates of the Solar Economy Parrino, Francesco; Fidalgo, Alexandra; Palmisano, Leonardo ACS Omega, Vol. 3, Issue 5 https://doi.org/10.1021/acsomega.8b00644	journal	May 2018
4D polycarbonates via stereolithography as scaffolds for soft tissue repair Weems, Andrew C.; Arno, Maria C.; Yu, Wei Nature Communications, Vol. 12, Issue 1 https://doi.org/10.1038/s41467-021-23956-6	journal	July 2021
Well-Defined and Structurally Diverse Aromatic Alternating Polyesters Synthesized by Simple Phosphazene Catalysis Li, Heng; Luo, Huitong; Zhao, Junpeng Macromolecules, Vol. 51, Issue 6 https://doi.org/10.1021/acs.macromol.8b00159	journal	March 2018
Polymerization of α-pinene using Lewis acidic ionic liquid as catalyst for production of terpene resin Liu, Shiwei; Zhou, Lin; Yu, Shitao Biomass and Bioenergy, Vol. 57 https://doi.org/10.1016/j.biombioe.2013.06.005	journal	October 2013
A ‘greener’ one-pot synthesis of monoterpene-functionalised lactide oligomers O'Brien, Dara M.; Atkinson, Rachel L.; Cavanagh, Robert European Polymer Journal, Vol. 125 https://doi.org/10.1016/j.eurpolymj.2020.109516	journal	February 2020
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration Rosenzweig, Derek; Carelli, Eric; Steffen, Thomas International Journal of Molecular Sciences, Vol. 16, Issue 12 https://doi.org/10.3390/ijms160715118	journal	July 2015
Synthesis and characterization of polylimonene: Polymer of an optically active terpene Singh, Anamika; Kamal, Meet Journal of Applied Polymer Science, Vol. 125, Issue 2 https://doi.org/10.1002/app.36250	journal	January 2012
Renewable Terpene Derivative as a Biosourced Elastomeric Building Block in the Design of Functional Acrylic Copolymers Noppalit, Sayrung; Simula, Alexandre; Ballard, Nicholas Biomacromolecules, Vol. 20, Issue 6 https://doi.org/10.1021/acs.biomac.9b00185	journal	May 2019
Synthesis of novel carvone (meth)acrylate monomers for the production of hydrophilic polymers with high terpene content Montanari, Ulisse; Taresco, Vincenzo; Liguori, Anna Polymer International, Vol. 70, Issue 5 https://doi.org/10.1002/pi.6096	journal	August 2020
High performance thiol-ene thermosets based on fully bio-based poly(limonene carbonate)s Li, Chunliang; Johansson, Mats; Sablong, Rafaël J. European Polymer Journal, Vol. 96 https://doi.org/10.1016/j.eurpolymj.2017.09.034	journal	November 2017
Linalool Derivatives for Natural Product-Based 4D Printing Resins Merckle, David; Constant, Eric; Weems, Andrew C. ACS Sustainable Chemistry & Engineering, Vol. 9, Issue 36 https://doi.org/10.1021/acssuschemeng.1c03760	journal	September 2021
Ethylene Copolymerization with Limonene and β-Pinene: New Bio-Based Polyolefins Prepared by Coordination Polymerization Kawamura, Kousei; Nomura, Kotohiro Macromolecules, Vol. 54, Issue 10 https://doi.org/10.1021/acs.macromol.1c00559	journal	May 2021
Postfabrication Functionalization of 4D-Printed Polycarbonate Photopolymer Scaffolds Brooks, Scott L.; Arno, Maria C.; Dove, Andrew P. ACS Applied Polymer Materials, Vol. 4, Issue 8 https://doi.org/10.1021/acsapm.2c00648	journal	July 2022
Unlocking the Processability and Recyclability of Biobased Poly(limonene carbonate) Neumann, Simon; Leitner, Lisa-Cathrin; Schmalz, Holger ACS Sustainable Chemistry & Engineering, Vol. 8, Issue 16 https://doi.org/10.1021/acssuschemeng.0c00895	journal	April 2020
4D Aliphatic photopolymer polycarbonates as direct ink writing of biodegradable, conductive graphite‐composite materials Brooks, Scott; Cartwright, Zachary; Merckle, David Polymer Composites, Vol. 42, Issue 10 https://doi.org/10.1002/pc.26211	journal	July 2021
Cross‐linking reaction of diastereomeric bis‐limonene oxide with polyhydric carboxylic acid Morinaga, Hisatoyo; Koike, Yutaka Journal of Applied Polymer Science, Vol. 139, Issue 39 https://doi.org/10.1002/app.52929	journal	July 2022
Terpene Based Sustainable Elastomer for Low Rolling Resistance and Improved Wet Grip Application: Synthesis, Characterization and Properties of Poly(styrene-co-myrcene) Sarkar, Preetom; Bhowmick, Anil K. ACS Sustainable Chemistry & Engineering, Vol. 4, Issue 10 https://doi.org/10.1021/acssuschemeng.6b01038	journal	August 2016
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects Zhu, Yunqing; Radlauer, Madalyn R.; Schneiderman, Deborah K. Macromolecules, Vol. 51, Issue 7 https://doi.org/10.1021/acs.macromol.7b02690	journal	March 2018
Phase Transition and Crystallization of Bio-based Comb-like Polymers Based on Renewable Castor Oil-Derived Epoxides and CO₂ Yang, Jie; Dong, Jincheng; Wang, Yangpeng Macromolecules, Vol. 54, Issue 18 https://doi.org/10.1021/acs.macromol.1c01362	journal	September 2021
On the Influence of the cis/trans Stereochemistry of Limonene Oxides toward the Synthesis of Biobased Thermosets by Crosslinking with Anhydrides Louisy, Elodie; Olivero, Sandra; Michelet, Véronique ACS Sustainable Chemistry & Engineering, Vol. 10, Issue 21 https://doi.org/10.1021/acssuschemeng.2c01553	journal	May 2022
A Green Synthesis of Polylimonene Using Maghnite-H+, an Exchanged Montmorillonite Clay, as Eco-Catalyst Derdar, Hodhaifa; Belbachir, Mohammed; Harrane, Amine Bulletin of Chemical Reaction Engineering & Catalysis, Vol. 14, Issue 1 https://doi.org/10.9767/bcrec.14.1.2692.69-78	journal	April 2019
Three-Dimensional Printed Polylactic Acid Scaffolds Promote Bone-like Matrix Deposition in Vitro Fairag, Rayan; Rosenzweig, Derek H.; Ramirez-Garcialuna, Jose L. ACS Applied Materials & Interfaces, Vol. 11, Issue 17 https://doi.org/10.1021/acsami.9b02502	journal	April 2019
Sustainable Thermoplastic Elastomers from Terpene-Derived Monomers Bolton, Justin M.; Hillmyer, Marc A.; Hoye, Thomas R. ACS Macro Letters, Vol. 3, Issue 8 https://doi.org/10.1021/mz500339h	journal	July 2014
Recent Advances in RO(CO)P of Bio-Based Monomers Santoro, Orlando; Izzo, Lorella; Della Monica, Francesco Sustainable Chemistry, Vol. 3, Issue 2 https://doi.org/10.3390/suschem3020017	journal	May 2022
Use of Limonene Epoxides and Derivatives as Promising Monomers for Biobased Polymers Louisy, Elodie; Khodyrieva, Veronika; Olivero, Sandra ChemPlusChem, Vol. 87, Issue 8 https://doi.org/10.1002/cplu.202200190	journal	August 2022
Bio‐based and Degradable Block Polyester Pressure‐Sensitive Adhesives Chen, Thomas T. D.; Carrodeguas, Leticia Peña; Sulley, Gregory S. Angewandte Chemie International Edition, Vol. 59, Issue 52 https://doi.org/10.1002/anie.202006807	journal	October 2020
Limonene-derived polycarbonates as biobased UV-curable (powder) coating resins Li, Chunliang; Johansson, Mats; Buijsen, Paul Progress in Organic Coatings, Vol. 151 https://doi.org/10.1016/j.porgcoat.2020.106073	journal	February 2021
Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification Weems, Andrew C.; Delle Chiaie, Kayla R.; Yee, Rachel Biomacromolecules, Vol. 21, Issue 1 https://doi.org/10.1021/acs.biomac.9b01125	journal	October 2019
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries Bhagia, Samarthya; Bornani, Kamlesh; Agrawal, Ruchi Applied Materials Today, Vol. 24 https://doi.org/10.1016/j.apmt.2021.101078	journal	September 2021
Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: Assessment of structural modification and kinetic parameters Gorrasi, Giuliana; Pantani, Roberto Polymer Degradation and Stability, Vol. 98, Issue 5 https://doi.org/10.1016/j.polymdegradstab.2013.02.005	journal	May 2013
Three-dimensional printing of PLA and PLA/PHA dumbbell-shaped specimens of crisscross and transverse patterns as promising materials in emerging application areas: Prediction study Gonzalez Ausejo, Jennifer; Rydz, Joanna; Musioł, Marta Polymer Degradation and Stability, Vol. 156 https://doi.org/10.1016/j.polymdegradstab.2018.08.008	journal	October 2018
Paving the Way to Sustainable Waterborne Pressure-Sensitive Adhesives Using Terpene-Based Triblock Copolymers Noppalit, Sayrung; Simula, Alexandre; Billon, Laurent ACS Sustainable Chemistry & Engineering, Vol. 7, Issue 21 https://doi.org/10.1021/acssuschemeng.9b04820	journal	October 2019
Control of PLA Stereoisomers-Based Polyurethane Elastomers as Highly Efficient Shape Memory Materials Fan, Xiaoshan; Tan, Beng Hoon; Li, Zibiao ACS Sustainable Chemistry & Engineering, Vol. 5, Issue 1 https://doi.org/10.1021/acssuschemeng.6b02652	journal	December 2016
Myrcenol-Based Monomer for Carbanionic Polymerization: Functional Copolymers with Myrcene and Bio-Based Graft Copolymers Wahlen, Christian; Rauschenbach, Moritz; Blankenburg, Jan Macromolecules, Vol. 53, Issue 20 https://doi.org/10.1021/acs.macromol.0c01734	journal	October 2020
Stereochemistry and stoichiometry in aliphatic polyester photopolymers for 3D printing tailored biomaterial scaffolds Brooks, S. L.; Constant, E. J.; King, O. M. Polymer Chemistry, Vol. 13, Issue 14 https://doi.org/10.1039/D1PY01405F	journal	January 2022
Terpene- and terpenoid-based polymeric resins for stereolithography 3D printing Weems, Andrew C.; Delle Chiaie, Kayla R.; Worch, Joshua C. Polymer Chemistry, Vol. 10, Issue 44 https://doi.org/10.1039/C9PY00950G	journal	January 2019
Terpene-Based Renewable Monomers and Polymers via Thiol–Ene Additions Firdaus, Maulidan; Montero de Espinosa, Lucas; Meier, Michael A. R. Macromolecules, Vol. 44, Issue 18 https://doi.org/10.1021/ma201544e	journal	September 2011
Synthesis and Characterization of Biobased Polyesters with Tunable T_g by ROCOP of Beta-Elemene Oxides and Phthalic Anhydride Monica, Francesco Della; Kleij, Arjan W. ACS Sustainable Chemistry & Engineering, Vol. 9, Issue 7 https://doi.org/10.1021/acssuschemeng.0c09189	journal	February 2021
Sustainable near UV-curable acrylates based on natural phenolics for stereolithography 3D printing Ding, Rui; Du, Yuyang; Goncalves, Rebecca B. Polymer Chemistry, Vol. 10, Issue 9 https://doi.org/10.1039/C8PY01652F	journal	January 2019
A One-Pot Synthesis of a Triblock Copolymer from Propylene Oxide/Carbon Dioxide and Lactide: Intermediacy of Polyol Initiators Darensbourg, Donald J.; Wu, Guang-Peng Angewandte Chemie International Edition, Vol. 52, Issue 40 https://doi.org/10.1002/anie.201304778	journal	August 2013
Effect of Chemical and Physical Properties on the In Vitro Degradation of 3D Printed High Resolution Poly(propylene fumarate) Scaffolds Walker, Jason M.; Bodamer, Emily; Krebs, Olivia Biomacromolecules, Vol. 18, Issue 4 https://doi.org/10.1021/acs.biomac.7b00146	journal	March 2017
A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications Alizadeh-Osgouei, Mona; Li, Yuncang; Wen, Cuie Bioactive Materials, Vol. 4 https://doi.org/10.1016/j.bioactmat.2018.11.003	journal	December 2019
Life cycle assessments of bio-based sustainable polylimonene carbonate production processes Zhang, Dongda; del Rio-Chanona, Ehecatl Antonio; Wagner, Jonathan L. Sustainable Production and Consumption, Vol. 14 https://doi.org/10.1016/j.spc.2018.03.001	journal	April 2018
Periodically Functionalized and Grafted Copolymers via 1:2-Sequence-Regulated Radical Copolymerization of Naturally Occurring Functional Limonene and Maleimide Derivatives Matsuda, Masaru; Satoh, Kotaro; Kamigaito, Masami Macromolecules, Vol. 46, Issue 14 https://doi.org/10.1021/ma401021d	journal	July 2013
Catalytic Ring-Opening Copolymerization of Limonene Oxide and Phthalic Anhydride: Toward Partially Renewable Polyesters Nejad, Elham Hosseini; Paoniasari, Anita; van Melis, Carlo G. W. Macromolecules, Vol. 46, Issue 3 https://doi.org/10.1021/ma301904y	journal	January 2013
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells Narayanan, Lokesh Karthik; Huebner, Pedro; Fisher, Matthew B. ACS Biomaterials Science & Engineering, Vol. 2, Issue 10 https://doi.org/10.1021/acsbiomaterials.6b00196	journal	May 2016
Terpene-based polyamides: A sustainable polymer class with huge potential Winnacker, Malte Current Opinion in Green and Sustainable Chemistry, Vol. 41 https://doi.org/10.1016/j.cogsc.2023.100819	journal	June 2023

Similar Records

Organocatalysis in ring opening copolymerization as a means of tailoring molecular weight dispersity and the subsequent impact on physical properties in 4D printable photopolymers

Journal Article · 2023 · Polymer Chemistry · OSTI ID:2424557

Dinuclear Ce(IV) Aryloxides: Highly Active Catalysts for Anhydride/Epoxide Ring-Opening Copolymerization

Journal Article · 2021 · Organometallics · OSTI ID:1822868

Related Subjects

Chemistry
Engineering
Science & Technology - Other Topics

4D Photopolymers Derived From Ring-Opening Copolymerization of Cyclic Anhydrides and Limonene Oxide

Citation Formats

References (75)

Similar Records

Related Subjects