3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing

Guggenbiller, Grant; Brooks, Scott; King, Olivia; Constant, Eric; Merckle, David; Weems, Andrew C.

doi:10.1021/acsapm.2c02171

3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing

Journal Article · 14 April 2023 · ACS Applied Polymer Materials

DOI:https://doi.org/10.1021/acsapm.2c02171· OSTI ID:2424355

Guggenbiller, Grant ^[1]; Brooks, Scott ^[2]; King, Olivia ^[3]; Constant, Eric ^[4]; Merckle, David ^[4]; ^[5]

Biomedical Engineering Program, Ohio University, Athens, Ohio 45701, United States
Department of Mechanical Engineering, Ohio University, Athens, Ohio 45701, United States
Molecular and Cellular Biology Program, Ohio University, Athens, Ohio 45701, United States
Translational Biomedical Sciences Program, Ohio University, Athens, Ohio 45701, United States
Biomedical Engineering Program, Ohio University, Athens, Ohio 45701, United States; Department of Mechanical Engineering, Ohio University, Athens, Ohio 45701, United States; Molecular and Cellular Biology Program, Ohio University, Athens, Ohio 45701, United States; Translational Biomedical Sciences Program, Ohio University, Athens, Ohio 45701, United States; Ohio Musculoskeletal and Neurological Institute, Ohio University, Athens, Ohio 45701, United States

Not provided.

Research Organization:: Ohio Univ., Athens, OH (United States)

Sponsoring Organization:: USDOE

OSTI ID:: 2424355

Journal Information:: ACS Applied Polymer Materials, Journal Name: ACS Applied Polymer Materials Journal Issue: 5 Vol. 5; ISSN 2637-6105

Publisher:: ACS Publications

Country of Publication:: United States

Language:: English

References (290)

Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis Sun, Pengbo; Zhang, Lijing; Tao, Shengyang Materials & Design, Vol. 173 https://doi.org/10.1016/j.matdes.2019.107780	journal	July 2019
Electrochemical construction of a bio-inspired micro/nano-textured structure with cell-sized microhole arrays on biomedical titanium to enhance bioactivity Liang, Jianhe; Song, Ran; Huang, Qiaoling Electrochimica Acta, Vol. 174 https://doi.org/10.1016/j.electacta.2015.06.100	journal	August 2015
The chemo-rheological behavior of an acrylic based UV-curable inkjet ink: Effect of surface chemistry for hyperbranched polymers Jafarifard, Samane; Bastani, Saeed; Soleimani-Gorgani, Atasheh Progress in Organic Coatings, Vol. 90 https://doi.org/10.1016/j.porgcoat.2015.08.007	journal	January 2016
Synthesis of β-Myrcene-Based Polymers and Styrene Block and Statistical Copolymers by SG1 Nitroxide-Mediated Controlled Radical Polymerization Métafiot, Adrien; Kanawati, Yara; Gérard, Jean-François Macromolecules, Vol. 50, Issue 8 https://doi.org/10.1021/acs.macromol.6b02675	journal	April 2017
The mechanical properties and cytotoxicity of cell-laden double-network hydrogels based on photocrosslinkable gelatin and gellan gum biomacromolecules Shin, Hyeongho; Olsen, Bradley D.; Khademhosseini, Ali Biomaterials, Vol. 33, Issue 11 https://doi.org/10.1016/j.biomaterials.2011.12.050	journal	April 2012
Carcinogenic Risk of Toluene Diisocyanate and 4,4′-Methylenediphenyl Diisocyanate: Epidemiological and Experimental Evidence Bolognesi, Claudia; Baur, Xaver; Marczynski, Boleslaw Critical Reviews in Toxicology, Vol. 31, Issue 6 https://doi.org/10.1080/20014091111974	journal	January 2001
Vegetable oil-derived epoxy monomers and polymer blends: A comparative study with review Wang, R.; Schuman, T. P. Express Polymer Letters, Vol. 7, Issue 3 https://doi.org/10.3144/expresspolymlett.2013.25	journal	January 2013
Extrusion Based 3D Printing of Sustainable Biocomposites from Biocarbon and Poly(trimethylene terephthalate) Diederichs, Elizabeth; Picard, Maisyn; Chang, Boon Peng Molecules, Vol. 26, Issue 14 https://doi.org/10.3390/molecules26144164	journal	July 2021
Modeling of Laser Beam Absorption in a Polymer Powder Bed Osmanlic, Fuad; Wudy, Katrin; Laumer, Tobias Polymers, Vol. 10, Issue 7 https://doi.org/10.3390/polym10070784	journal	July 2018
4D Printing: Multi-Material Shape Change Tibbits, Skylar Architectural Design, Vol. 84, Issue 1 https://doi.org/10.1002/ad.1710	journal	January 2014
Sustainability in additive manufacturing: Exploring the mechanical potential of recycled PET filaments Schneevogt, Helge; Stelzner, Kevin; Yilmaz, Buket Composites and Advanced Materials, Vol. 30 https://doi.org/10.1177/26349833211000063	journal	January 2021
A Bio-Based Resin for a Multi-Scale Optical 3D Printing Skliutas, Edvinas; Lebedevaite, Migle; Kasetaite, Sigita Scientific Reports, Vol. 10, Issue 1 https://doi.org/10.1038/s41598-020-66618-1	journal	June 2020
Assessment of hydrogels for bioprinting of endothelial cells Benning, Leo; Gutzweiler, Ludwig; Tröndle, Kevin Journal of Biomedical Materials Research Part A, Vol. 106, Issue 4 https://doi.org/10.1002/jbm.a.36291	journal	November 2017
Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering Yuan, Shangqin; Bai, Jiaming; Chua, Chee Polymers, Vol. 8, Issue 10 https://doi.org/10.3390/polym8100370	journal	October 2016
Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene Petersmann, Sandra; Spoerk-Erdely, Petra; Feuchter, Michael Additive Manufacturing, Vol. 35 https://doi.org/10.1016/j.addma.2020.101384	journal	October 2020
Sustainable Additive Manufacturing of Plastics Sardon, Haritz; Long, Timothy; Le Ferrand, Hortense ACS Sustainable Chemistry & Engineering, Vol. 10, Issue 6 https://doi.org/10.1021/acssuschemeng.2c00475	journal	February 2022
Aqueous cationic homo- and co-polymerizations of β-myrcene and styrene: a green route toward terpene-based rubbery polymers Hulnik, Maksim I.; Vasilenko, Irina V.; Radchenko, Alexei V. Polymer Chemistry, Vol. 9, Issue 48 https://doi.org/10.1039/C8PY01378K	journal	January 2018
Multimaterial bioprinting and combination of processing techniques towards the fabrication of biomimetic tissues and organs Tavafoghi, Maryam; Darabi, Mohammad Ali; Mahmoodi, Mahboobeh Biofabrication, Vol. 13, Issue 4 https://doi.org/10.1088/1758-5090/ac0b9a	journal	August 2021
Sustainable polymers from renewable resources Zhu, Yunqing; Romain, Charles; Williams, Charlotte K. Nature, Vol. 540, Issue 7633 https://doi.org/10.1038/nature21001	journal	December 2016
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks Yuk, Hyunwoo; Zhao, Xuanhe Advanced Materials, Vol. 30, Issue 6 https://doi.org/10.1002/adma.201704028	journal	December 2017
Degradable, Photochemically Printable Poly(propylene fumarate)-Based ABA Triblock Elastomers Petersen, Shannon R.; Yu, Jiayi; Yeazel, Taylor R. Biomacromolecules, Vol. 23, Issue 6 https://doi.org/10.1021/acs.biomac.2c00151	journal	May 2022
3D printing of composite tissue with complex shape applied to ear regeneration Lee, Jung-Seob; Hong, Jung Min; Jung, Jin Woo Biofabrication, Vol. 6, Issue 2 https://doi.org/10.1088/1758-5082/6/2/024103	journal	January 2014
Mechanical and in vitro performance of apatite–wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing Suwanprateeb, J.; Sanngam, R.; Suvannapruk, W. Journal of Materials Science: Materials in Medicine, Vol. 20, Issue 6 https://doi.org/10.1007/s10856-009-3697-1	journal	February 2009
Renewability is not Enough: Recent Advances in the Sustainable Synthesis of Biomass-Derived Monomers and Polymers Llevot, Audrey; Dannecker, Patrick-Kurt; von Czapiewski, Marc Chemistry - A European Journal, Vol. 22, Issue 33 https://doi.org/10.1002/chem.201602068	journal	June 2016
Interpenetrating polymer network hydrogels composed of chitosan and photocrosslinkable gelatin with enhanced mechanical properties for tissue engineering Suo, Hairui; Zhang, Deming; Yin, Jun Materials Science and Engineering: C, Vol. 92 https://doi.org/10.1016/j.msec.2018.07.016	journal	November 2018
Photopolymerization of Acrylated Epoxidized Soybean Oil: A Photocalorimetry-Based Kinetic Study Kousaalya, Adhimoolam Bakthavachalam; Ayalew, Beshah; Pilla, Srikanth ACS Omega, Vol. 4, Issue 26 https://doi.org/10.1021/acsomega.9b02680	journal	December 2019
From terpenes to sustainable and functional polymers Della Monica, Francesco; Kleij, Arjan W. Polymer Chemistry, Vol. 11, Issue 32 https://doi.org/10.1039/D0PY00817F	journal	January 2020
Semiaromatic Polyesters Derived from Renewable Terpene Oxides with High Glass Transitions Peña Carrodeguas, Leticia; Martín, Carmen; Kleij, Arjan W. Macromolecules, Vol. 50, Issue 14 https://doi.org/10.1021/acs.macromol.7b00862	journal	July 2017
Highly Cross-Linked Shape Memory Polymers with Tunable Oxidative and Hydrolytic Degradation Rates and Selected Products Based on Succinic Acid Weems, Andrew C.; Easley, Alexandra; Roach, Sydney Reese ACS Applied Bio Materials, Vol. 2, Issue 1 https://doi.org/10.1021/acsabm.8b00650	journal	December 2018
Additive Manufacturing of Bovine Serum Albumin-Based Hydrogels and Bioplastics Smith, Patrick T.; Narupai, Benjaporn; Tsui, Jonathan H. Biomacromolecules, Vol. 21, Issue 2 https://doi.org/10.1021/acs.biomac.9b01236	journal	November 2019
Characterizing the Process Physics of Ultrasound-Assisted Bioprinting Chansoria, Parth; Shirwaiker, Rohan Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-019-50449-w	journal	September 2019
110th Anniversary : Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design Appuhamillage, Gayan A.; Chartrain, Nicholas; Meenakshisundaram, Viswanath Industrial & Engineering Chemistry Research, Vol. 58, Issue 33 https://doi.org/10.1021/acs.iecr.9b02679	journal	July 2019
Incorporating crosslinks in fused filament fabrication: Molecular insight into post deposition reactions Perryman, S. Connor; Dadmun, Mark D. Additive Manufacturing, Vol. 38 https://doi.org/10.1016/j.addma.2020.101746	journal	February 2021
3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties Luo, Yuanyuan; Le Fer, Gaëlle; Dean, David Biomacromolecules, Vol. 20, Issue 4 https://doi.org/10.1021/acs.biomac.9b00076	journal	February 2019
Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler Fico, Daniela; Rizzo, Daniela; De Carolis, Valentina Polymers, Vol. 14, Issue 18 https://doi.org/10.3390/polym14183756	journal	September 2022
Osteogenesis of adipose-derived stem cells on polycaprolactone-β-tricalcium phosphate scaffold fabricated via selective laser sintering and surface coating with collagen type I Liao, Han-Tsung; Lee, Ming-Yih; Tsai, Wen-Wei Journal of Tissue Engineering and Regenerative Medicine, Vol. 10, Issue 10 https://doi.org/10.1002/term.1811	journal	August 2013
Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives Voet, Vincent S. D.; Guit, Jarno; Loos, Katja Macromolecular Rapid Communications, Vol. 42, Issue 3 https://doi.org/10.1002/marc.202000475	journal	November 2020
Active origami by 4D printing Ge, Qi; Dunn, Conner K.; Qi, H. Jerry Smart Materials and Structures, Vol. 23, Issue 9 https://doi.org/10.1088/0964-1726/23/9/094007	journal	August 2014
Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth Cooke, Malcolm N.; Fisher, John P.; Dean, David Journal of Biomedical Materials Research, Vol. 64B, Issue 2, p. 65-69 https://doi.org/10.1002/jbm.b.10485	journal	January 2003
Ring Opening Copolymerization of Four-Dimensional Printed Shape Memory Polyester Photopolymers Using Digital Light Processing Merckle, David; Constant, Eric; Cartwright, Zachary Macromolecules, Vol. 54, Issue 6 https://doi.org/10.1021/acs.macromol.0c02401	journal	March 2021
Effect of toughening agents on the properties of poplar wood flour/poly (lactic acid) composites fabricated with Fused Deposition Modeling Guo, Rui; Ren, Zechun; Bi, Hongjie European Polymer Journal, Vol. 107 https://doi.org/10.1016/j.eurpolymj.2018.07.035	journal	October 2018
Hydrogels and Cell Based Therapies in Spinal Cord Injury Regeneration Assunção-Silva, Rita C.; Gomes, Eduardo D.; Sousa, Nuno Stem Cells International, Vol. 2015 https://doi.org/10.1155/2015/948040	journal	January 2015
A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation Ali, Mohamed; Pr, Anil Kumar; Yoo, James J. Advanced Healthcare Materials, Vol. 8, Issue 7 https://doi.org/10.1002/adhm.201800992	journal	February 2019
Eugenol-Based Siloxane Acrylates for Ultraviolet-Curable Coatings and 3D Printing Zheng, Jieyuan; Cai, Yuquan; Zhang, Xianwei ACS Applied Polymer Materials, Vol. 4, Issue 2 https://doi.org/10.1021/acsapm.1c01405	journal	January 2022
From biowaste to bioresource: Effect of a lignocellulosic filler on the properties of poly(3-hydroxybutyrate) Angelini, Stefania; Cerruti, Pierfrancesco; Immirzi, Barbara International Journal of Biological Macromolecules, Vol. 71 https://doi.org/10.1016/j.ijbiomac.2014.07.038	journal	November 2014
Significant improvement in performance of recycled polyethylene/wood flour composites by synergistic compatibilization at multi-scale interfaces Hong, Haoqun; Liao, Haiyang; Zhang, Haiyan Composites Part A: Applied Science and Manufacturing, Vol. 64 https://doi.org/10.1016/j.compositesa.2014.04.022	journal	September 2014
Impact of cell density on the bioprinting of gelatin methacrylate (GelMA) bioinks Jain, Tanmay; Baker, Hannah B.; Gipsov, Anna Bioprinting, Vol. 22 https://doi.org/10.1016/j.bprint.2021.e00131	journal	June 2021
Stereoselective polymerization of biosourced terpenes β-myrcene and β-ocimene and their copolymerization with styrene promoted by titanium catalysts Naddeo, Marco; Buonerba, Antonio; Luciano, Ermanno Polymer, Vol. 131 https://doi.org/10.1016/j.polymer.2017.10.028	journal	November 2017
Matrix Elasticity Directs Stem Cell Lineage Specification Engler, Adam J.; Sen, Shamik; Sweeney, H. Lee Cell, Vol. 126, Issue 4, p. 677-689 https://doi.org/10.1016/j.cell.2006.06.044	journal	August 2006
Digital light processing 3D printed silk fibroin hydrogel for cartilage tissue engineering Hong, Heesun; Seo, Ye Been; Kim, Do Yeon Biomaterials, Vol. 232 https://doi.org/10.1016/j.biomaterials.2019.119679	journal	February 2020
Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects Chua, C. K.; Leong, K. F.; Tan, K. H. Journal of Materials Science: Materials in Medicine, Vol. 15, Issue 10 https://doi.org/10.1023/B:JMSM.0000046393.81449.a5	journal	October 2004
Controlled Radical Polymerization of Myrcene in Bulk: Mapping the Effect of Conditions on the System Bauer, Nicole; Brunke, Jessica; Kali, Gergely ACS Sustainable Chemistry & Engineering, Vol. 5, Issue 11 https://doi.org/10.1021/acssuschemeng.7b02091	journal	September 2017
One-step volumetric additive manufacturing of complex polymer structures Shusteff, Maxim; Browar, Allison E. M.; Kelly, Brett E. Science Advances, Vol. 3, Issue 12 https://doi.org/10.1126/sciadv.aao5496	journal	December 2017
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity Kang, Hyun-Wook; Lee, Sang Jin; Ko, In Kap Nature Biotechnology, Vol. 34, Issue 3 https://doi.org/10.1038/nbt.3413	journal	February 2016
Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing Voet, Vincent S. D.; Strating, Tobias; Schnelting, Geraldine H. M. ACS Omega, Vol. 3, Issue 2 https://doi.org/10.1021/acsomega.7b01648	journal	February 2018
3D printed polylactic acid and acrylonitrile butadiene styrene fluidic structures for biological applications: Tailoring bio-material interface via surface modification Pokharna, Piyush P.; Ghantasala, Muralidhar K.; Rozhkova, Elena A. Materials Today Communications, Vol. 27 https://doi.org/10.1016/j.mtcomm.2021.102348	journal	June 2021
Biomechanical properties of native and tissue engineered heart valve constructs Hasan, Anwarul; Ragaert, Kim; Swieszkowski, Wojciech Journal of Biomechanics, Vol. 47, Issue 9 https://doi.org/10.1016/j.jbiomech.2013.09.023	journal	June 2014
Making Benzoxazine Greener and Stronger: Renewable Resource, Microwave Irradiation, Green Solvent, and Excellent Thermal Properties Teng, Na; Yang, Shimin; Dai, Jinyue ACS Sustainable Chemistry & Engineering, Vol. 7, Issue 9 https://doi.org/10.1021/acssuschemeng.9b00607	journal	April 2019
Continuous liquid interface production of 3D objects Tumbleston, J. R.; Shirvanyants, D.; Ermoshkin, N. Science, Vol. 347, Issue 6228 https://doi.org/10.1126/science.aaa2397	journal	March 2015
Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution Wang, Zhiguo; Xu, Junfei; Lu, Yingzhao Industrial Crops and Products, Vol. 109 https://doi.org/10.1016/j.indcrop.2017.09.061	journal	December 2017
Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffolds Dean, David; Wallace, Jonathan; Siblani, Ali Virtual and Physical Prototyping, Vol. 7, Issue 1 https://doi.org/10.1080/17452759.2012.673152	journal	March 2012
Tandem synthesis of alternating polyesters from renewable resources Robert, Carine; de Montigny, Frédéric; Thomas, Christophe M. Nature Communications, Vol. 2, Issue 1 https://doi.org/10.1038/ncomms1596	journal	September 2011
Magnetism and microfluidics Pamme, Nicole Lab Chip, Vol. 6, Issue 1 https://doi.org/10.1039/B513005K	journal	January 2006
Bio-based polymyrcene with highly ordered structure via solvent free controlled radical polymerization Hilschmann, Jessica; Kali, Gergely European Polymer Journal, Vol. 73 https://doi.org/10.1016/j.eurpolymj.2015.10.021	journal	December 2015
Stimuli-responsive hydrogels for manipulation of cell microenvironment: From chemistry to biofabrication technology Mohamed, Mohamed Alaa; Fallahi, Afsoon; El-Sokkary, Ahmed M. A. Progress in Polymer Science, Vol. 98 https://doi.org/10.1016/j.progpolymsci.2019.101147	journal	November 2019
Cleavage of the Carbon—Sulfur Bond. Rates of Hydrolysis of Some Alkyl Acetates and the Corresponding Thiolacetates in Aqueous Acetone Rylander, Paul N.; Tarbell, D. Stanley Journal of the American Chemical Society, Vol. 72, Issue 7 https://doi.org/10.1021/ja01163a061	journal	July 1950
3D printing filament as a second life of waste plastics—a review Mikula, Katarzyna; Skrzypczak, Dawid; Izydorczyk, Grzegorz Environmental Science and Pollution Research, Vol. 28, Issue 10 https://doi.org/10.1007/s11356-020-10657-8	journal	September 2020
Selective Laser Sintering of Filled Polymer Systems: Bulk Properties and Laser Beam Material Interaction Wudy, Katrin; Lanzl, Lydia; Drummer, Dietmar Physics Procedia, Vol. 83 https://doi.org/10.1016/j.phpro.2016.08.104	journal	January 2016
Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering Wiria, F. E.; Leong, K. F.; Chua, C. K. Acta Biomaterialia, Vol. 3, Issue 1 https://doi.org/10.1016/j.actbio.2006.07.008	journal	January 2007
Polymer powders for selective laser sintering (SLS) Schmid, Manfred; Amado, Antonio; Wegener, Konrad PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers, AIP Conference Proceedings https://doi.org/10.1063/1.4918516	conference	January 2015
Photocrosslinked nanocomposite hydrogels from PEG and silica nanospheres: Structural, mechanical and cell adhesion characteristics Gaharwar, Akhilesh K.; Rivera, Christian; Wu, Chia-Jung Materials Science and Engineering: C, Vol. 33, Issue 3 https://doi.org/10.1016/j.msec.2012.12.099	journal	April 2013
Polyvinyl alcohol reinforced with crystalline nanocellulose for 3D printing application Cataldi, A.; Rigotti, D.; Nguyen, V. D. H. Materials Today Communications, Vol. 15 https://doi.org/10.1016/j.mtcomm.2018.02.007	journal	June 2018
Flexural properties of selectively sintered polyamide and Alumide Marsavina, Liviu; Stoia, Dan Ioan Material Design & Processing Communications, Vol. 2, Issue 1 https://doi.org/10.1002/mdp2.112	journal	November 2019
Copolymerization of Limonene with n‐Butyl Acrylate Ren, Shanshan; Trevino, Esther; Dubé, Marc A. Macromolecular Reaction Engineering, Vol. 9, Issue 4 https://doi.org/10.1002/mren.201400068	journal	February 2015
Sustainable Materials and Chemical Processes for Additive Manufacturing Sanchez-Rexach, Eva; Johnston, Trevor G.; Jehanno, Coralie Chemistry of Materials, Vol. 32, Issue 17 https://doi.org/10.1021/acs.chemmater.0c02008	journal	August 2020
Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release Yoshida, S.; Hagiwara, K.; Hasebe, T. Surface and Coatings Technology, Vol. 233 https://doi.org/10.1016/j.surfcoat.2013.02.042	journal	October 2013
Bioderived 4D Printable Terpene Photopolymers from Limonene and β-Myrcene Constant, Eric; King, Olivia; Weems, Andrew C. Biomacromolecules, Vol. 23, Issue 6 https://doi.org/10.1021/acs.biomac.2c00085	journal	May 2022
Synthetic Biodegradable Hydrogels with Excellent Mechanical Properties and Good Cell Adhesion Characteristics Obtained by the Combinatorial Synthesis of Photo-Cross-Linked Networks Zant, Erwin; Grijpma, Dirk W. Biomacromolecules, Vol. 17, Issue 5 https://doi.org/10.1021/acs.biomac.5b01721	journal	April 2016
Ultrasonic and Catalyst-Free Epoxidation of Limonene and Other Terpenes Using Dimethyl Dioxirane in Semibatch Conditions Charbonneau, Luc; Foster, Xavier; Kaliaguine, Serge ACS Sustainable Chemistry & Engineering, Vol. 6, Issue 9 https://doi.org/10.1021/acssuschemeng.8b02578	journal	July 2018
Synthesis and 3D Printing of PEG–Poly(propylene fumarate) Diblock and Triblock Copolymer Hydrogels Dilla, Rodger A.; Motta, Cecilia M. M.; Snyder, Savannah R. ACS Macro Letters, Vol. 7, Issue 10 https://doi.org/10.1021/acsmacrolett.8b00720	journal	October 2018
Biobased Terpene Derivatives: Stiff and Biocompatible Compounds to Tune Biodegradability and Properties of Poly(butylene succinate) Zeinali, Reza; del Valle, Luis J.; Franco, Lourdes Polymers, Vol. 14, Issue 1 https://doi.org/10.3390/polym14010161	journal	December 2021
3D bioprinting of tissues and organs Murphy, Sean V.; Atala, Anthony Nature Biotechnology, Vol. 32, Issue 8 https://doi.org/10.1038/nbt.2958	journal	August 2014
Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends Tan, K. H.; Chua, C. K.; Leong, K. F. Biomaterials, Vol. 24, Issue 18 https://doi.org/10.1016/S0142-9612(03)00131-5	journal	August 2003
Biofabrication of multi-material anatomically shaped tissue constructs Visser, Jetze; Peters, Benjamin; Burger, Thijs J. Biofabrication, Vol. 5, Issue 3 https://doi.org/10.1088/1758-5082/5/3/035007	journal	July 2013
High elasticity, chemically recyclable, thermoplastics from bio-based monomers: carbon dioxide, limonene oxide and ε-decalactone Carrodeguas, Leticia Peña; Chen, Thomas T. D.; Gregory, Georgina L. Green Chemistry, Vol. 22, Issue 23 https://doi.org/10.1039/D0GC02295K	journal	January 2020
Two‐Step 3 D‐Printing Approach toward Sustainable, Repairable, Fluorescent Shape‐Memory Thermosets Derived from Cellulose and Rosin Lu, Chuanwei; Wang, Chunpeng; Yu, Juan ChemSusChem, Vol. 13, Issue 5 https://doi.org/10.1002/cssc.201902191	journal	November 2019
Regenerative tissue filler for breast conserving surgery and other soft tissue restoration and reconstruction needs Puls, Theodore J.; Fisher, Carla S.; Cox, Abigail Scientific Reports, Vol. 11, Issue 1 https://doi.org/10.1038/s41598-021-81771-x	journal	February 2021
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface Walker, David A.; Hedrick, James L.; Mirkin, Chad A. Science, Vol. 366, Issue 6463 https://doi.org/10.1126/science.aax1562	journal	October 2019
Mechanical properties andin vitrobehavior of nanofiber–hydrogel composites for tissue engineering applications Kai, Dan; Prabhakaran, Molamma P.; Stahl, Benjamin Nanotechnology, Vol. 23, Issue 9 https://doi.org/10.1088/0957-4484/23/9/095705	journal	February 2012
A critical review on the fused deposition modeling of thermoplastic polymer composites Penumakala, Pavan Kumar; Santo, Jose; Thomas, Alen Composites Part B: Engineering, Vol. 201 https://doi.org/10.1016/j.compositesb.2020.108336	journal	November 2020
Thermo-sensitive and biodegradable hydrogels based on stereocomplexed Pluronic multi-block copolymers for controlled protein delivery Chung, Hyun Jung; Lee, Yuhan; Park, Tae Gwan Journal of Controlled Release, Vol. 127, Issue 1 https://doi.org/10.1016/j.jconrel.2007.12.008	journal	April 2008
Bioink properties before, during and after 3D bioprinting Hölzl, Katja; Lin, Shengmao; Tytgat, Liesbeth Biofabrication, Vol. 8, Issue 3 https://doi.org/10.1088/1758-5090/8/3/032002	journal	September 2016
Solvent-Free Method for the Copolymerization of Labile Sugar-Derived Building Blocks into Polyamides Wróblewska, Aleksandra A.; Stevens, Sander; Garsten, Wessel ACS Sustainable Chemistry & Engineering, Vol. 6, Issue 10 https://doi.org/10.1021/acssuschemeng.8b03587	journal	September 2018
Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres Zhou, Wen You; Lee, Siu Hang; Wang, Min Journal of Materials Science: Materials in Medicine, Vol. 19, Issue 7 https://doi.org/10.1007/s10856-007-3089-3	journal	July 2007
Volumetric additive manufacturing via tomographic reconstruction Kelly, Brett E.; Bhattacharya, Indrasen; Heidari, Hossein Science, Vol. 363, Issue 6431 https://doi.org/10.1126/science.aau7114	journal	January 2019
3D Printing of Shape Memory Polymers for Flexible Electronic Devices Zarek, Matt; Layani, Michael; Cooperstein, Ido Advanced Materials, Vol. 28, Issue 22 https://doi.org/10.1002/adma.201503132	journal	September 2015
Recyclability Analysis of Starch Thermoplastic/Almond Shell Biocomposite Ibáñez-García, Ana; Martínez-García, Asunción; Ferrándiz-Bou, Santiago Polymers, Vol. 13, Issue 7 https://doi.org/10.3390/polym13071159	journal	April 2021
Progress in Renewable Polymers from Natural Terpenes, Terpenoids, and Rosin Wilbon, Perry A.; Chu, Fuxiang; Tang, Chuanbing Macromolecular Rapid Communications, Vol. 34, Issue 1 https://doi.org/10.1002/marc.201200513	journal	October 2012
Lipase‐catalyzed synthesis of aliphatic poly(β‐thioether ester) with various methylene group contents: thermal properties, crystallization and degradation Wu, Wan‐Xia Polymer International, Vol. 68, Issue 11 https://doi.org/10.1002/pi.5894	journal	August 2019
Enzymatic-Assisted Modification of Thermomechanical Pulp Fibers To Improve the Interfacial Adhesion with Poly(lactic acid) for 3D Printing Filgueira, Daniel; Holmen, Solveig; Melbø, Johnny K. ACS Sustainable Chemistry & Engineering, Vol. 5, Issue 10 https://doi.org/10.1021/acssuschemeng.7b02351	journal	September 2017
Photocrosslinked methacrylated carboxymethyl chitin hydrogels with tunable degradation and mechanical behavior Kang, Wenting; Bi, Bo; Zhuo, Renxi Carbohydrate Polymers, Vol. 160 https://doi.org/10.1016/j.carbpol.2016.12.032	journal	March 2017
Stereolithography in tissue engineering Skoog, Shelby A.; Goering, Peter L.; Narayan, Roger J. Journal of Materials Science: Materials in Medicine, Vol. 25, Issue 3 https://doi.org/10.1007/s10856-013-5107-y	journal	December 2013
Tribological characteristics of digital light processing (DLP) 3D printed graphene/resin composite: Influence of graphene presence and process settings Hanon, Muammel M.; Ghaly, Arsany; Zsidai, László Materials & Design, Vol. 218 https://doi.org/10.1016/j.matdes.2022.110718	journal	June 2022
Examination of radio‐opacity enhancing additives in shape memory polyurethane foams Weems, Andrew C.; Raymond, Jeffery E.; Wacker, Kevin T. Journal of Applied Polymer Science, Vol. 132, Issue 23 https://doi.org/10.1002/app.42054	journal	February 2015
Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review Wasti, Sanjita; Adhikari, Sushil Frontiers in Chemistry, Vol. 8 https://doi.org/10.3389/fchem.2020.00315	journal	May 2020
Decellularization for whole organ bioengineering Arenas-Herrera, J. E.; Ko, I. K.; Atala, A. Biomedical Materials, Vol. 8, Issue 1 https://doi.org/10.1088/1748-6041/8/1/014106	journal	January 2013
Photosensitive naturally derived resins toward optical 3-D printing Skliutas, Edvinas; Kasetaite, Sigita; Jonušauskas, Linas Optical Engineering, Vol. 57, Issue 04 https://doi.org/10.1117/1.OE.57.4.041412	journal	April 2018
Monomer design strategies to create natural product-based polymer materials Kristufek, Samantha L.; Wacker, Kevin T.; Tsao, Yi-Yun Timothy Natural Product Reports, Vol. 34, Issue 4 https://doi.org/10.1039/C6NP00112B	journal	January 2017
Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications Ilyas, R.; Zuhri, M.; Norrrahim, Mohd Polymers, Vol. 14, Issue 1 https://doi.org/10.3390/polym14010182	journal	January 2022
Multi-component post-polymerization modification reactions of polymers featuring lignin-model compounds Kakuchi, Ryohei; Yoshida, Satoshi; Sasaki, Takasuke Polymer Chemistry, Vol. 9, Issue 16 https://doi.org/10.1039/C7PY01923H	journal	January 2018
A Polysaccharide resembling Alginic Acid from a Pseudomonas Micro-organism Linker, Alfred; Jones, Russell S. Nature, Vol. 204, Issue 4954 https://doi.org/10.1038/204187a0	journal	October 1964
Characterisation, biodegradability and application of palm fibre-reinforced polyhydroxyalkanoate composites Wu, Chin-San; Liao, Hsin-Tzu; Cai, Yu-Xuan Polymer Degradation and Stability, Vol. 140 https://doi.org/10.1016/j.polymdegradstab.2017.04.016	journal	June 2017
Cellulose Nanocrystal-Enhanced Thermal-Sensitive Hydrogels of Block Copolymers for 3D Bioprinting Cui, Yuecheng; Jin, Ronghua; Zhang, Yifan International Journal of Bioprinting, Vol. 7, Issue 4 https://doi.org/10.18063/ijb.v7i4.397	journal	August 2024
Vanillin-based resin for use in composite applications Stanzione III, Joseph F.; Sadler, Joshua M.; La Scala, John J. Green Chemistry, Vol. 14, Issue 8 https://doi.org/10.1039/c2gc35672d	journal	January 2012
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences Gross, Bethany C.; Erkal, Jayda L.; Lockwood, Sarah Y. Analytical Chemistry, Vol. 86, Issue 7 https://doi.org/10.1021/ac403397r	journal	January 2014
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing Shirazi, Seyed Farid Seyed; Gharehkhani, Samira; Mehrali, Mehdi Science and Technology of Advanced Materials, Vol. 16, Issue 3 https://doi.org/10.1088/1468-6996/16/3/033502	journal	June 2015
Multiple initiators and dyes for continuous Digital Light Processing (cDLP) additive manufacture of resorbable bone tissue engineering scaffolds Dean, David; Mott, Eric; Luo, Xinyi Virtual and Physical Prototyping, Vol. 9, Issue 1 https://doi.org/10.1080/17452759.2013.873337	journal	January 2014
Selective laser sintering (SLS) 3D printing of medicines Fina, Fabrizio; Goyanes, Alvaro; Gaisford, Simon International Journal of Pharmaceutics, Vol. 529, Issue 1-2 https://doi.org/10.1016/j.ijpharm.2017.06.082	journal	August 2017
Photo-curing 3D printing technique and its challenges Quan, Haoyuan; Zhang, Ting; Xu, Hang Bioactive Materials, Vol. 5, Issue 1 https://doi.org/10.1016/j.bioactmat.2019.12.003	journal	March 2020
Additive manufacturing — A review of 4D printing and future applications Mitchell, A.; Lafont, U.; Hołyńska, M. Additive Manufacturing, Vol. 24 https://doi.org/10.1016/j.addma.2018.10.038	journal	December 2018
Basics of Fused Deposition Modelling (FDM) Mwema, Fredrick Madaraka; Akinlabi, Esther Titilayo Fused Deposition Modeling https://doi.org/10.1007/978-3-030-48259-6_1	book	January 2020
3D printing of resorbable poly(propylene fumarate) tissue engineering scaffolds Childers, Erin P.; Wang, Martha O.; Becker, Matthew L. MRS Bulletin, Vol. 40, Issue 2 https://doi.org/10.1557/mrs.2015.2	journal	February 2015
Polymer Ionomers for Rapid Prototyping and Rapid Manufacturing by Means of 3D Printing Pfister, Andreas; Walz, Uwe; Laib, Andres Macromolecular Materials and Engineering, Vol. 290, Issue 2 https://doi.org/10.1002/mame.200400282	journal	February 2005
The arrival of commercial bioprinters – Towards 3D bioprinting revolution! Choudhury, Deepak; Anand, Shivesh; Naing, May Win International Journal of Bioprinting, Vol. 4, Issue 2 https://doi.org/10.18063/ijb.v4i2.139	journal	August 2024
Manipulation of Magnetically Labeled and Unlabeled Cells with Mobile Magnetic Traps Henighan, T.; Chen, A.; Vieira, G. Biophysical Journal, Vol. 98, Issue 3 https://doi.org/10.1016/j.bpj.2009.10.036	journal	February 2010
4D polycarbonates via stereolithography as scaffolds for soft tissue repair Weems, Andrew C.; Arno, Maria C.; Yu, Wei Nature Communications, Vol. 12, Issue 1 https://doi.org/10.1038/s41467-021-23956-6	journal	July 2021
New renewably-sourced polyesters from limonene-derived monomers Thomsett, Megan R.; Moore, Jonathan C.; Buchard, Antoine Green Chemistry, Vol. 21, Issue 1 https://doi.org/10.1039/C8GC02957A	journal	January 2019
Fabrication and characterisation of ceramics via low-cost DLP 3D printing Varghese, Giftymol; Moral, Mónica; Castro-García, Miguel Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 57, Issue 1 https://doi.org/10.1016/j.bsecv.2017.09.004	journal	January 2018
3D printing: An appealing route for customized drug delivery systems Elkasabgy, Nermeen A.; Mahmoud, Azza A.; Maged, Amr International Journal of Pharmaceutics, Vol. 588 https://doi.org/10.1016/j.ijpharm.2020.119732	journal	October 2020
Engineering budding yeast for the production of coumarins from lignin Zhao, Chen-Hui; Zhang, Ren-Kuan; Qiao, Bin Biochemical Engineering Journal, Vol. 160 https://doi.org/10.1016/j.bej.2020.107634	journal	August 2020
Digital Light Processing: A Review on the Printing Resolution and the Materials Options Bifano, Michael Applied and Computational Engineering, Vol. 1, Issue 1 https://doi.org/10.54254/ace.2022002	journal	May 2022
A Study on Melt Flow Index on Copper-ABS for Fused Deposition Modeling (FDM) Feedstock Isa, Noor Mu'izzah Ahmad; Sa'ude, Nasuha; Ibrahim, M. Applied Mechanics and Materials, Vol. 773-774 https://doi.org/10.4028/www.scientific.net/AMM.773-774.8	journal	July 2015
Collagen-Based Hydrogels Composites from Hide Waste to Produce Smart Fertilizers Stefan, Daniela Simina; Zainescu, Gabriel; Manea-Saghin, Ana-Maria Materials, Vol. 13, Issue 19 https://doi.org/10.3390/ma13194396	journal	October 2020
Synthesis and Biological Evaluation of Well-Defined Poly(propylene fumarate) Oligomers and Their Use in 3D Printed Scaffolds Luo, Yuanyuan; Dolder, Courtney K.; Walker, Jason M. Biomacromolecules, Vol. 17, Issue 2 https://doi.org/10.1021/acs.biomac.6b00014	journal	January 2016
Printability and Critical Insight into Polymer Properties during Direct-Extrusion Based 3D Printing of Medical Grade Polylactide and Copolyesters Jain, Shubham; Fuoco, Tiziana; Yassin, Mohammed A. Biomacromolecules, Vol. 21, Issue 2 https://doi.org/10.1021/acs.biomac.9b01112	journal	September 2019
A ‘greener’ one-pot synthesis of monoterpene-functionalised lactide oligomers O'Brien, Dara M.; Atkinson, Rachel L.; Cavanagh, Robert European Polymer Journal, Vol. 125 https://doi.org/10.1016/j.eurpolymj.2020.109516	journal	February 2020
Synthesis and characterization of polylimonene: Polymer of an optically active terpene Singh, Anamika; Kamal, Meet Journal of Applied Polymer Science, Vol. 125, Issue 2 https://doi.org/10.1002/app.36250	journal	January 2012
Directing the Self-assembly of Tumour Spheroids by Bioprinting Cellular Heterogeneous Models within Alginate/Gelatin Hydrogels Jiang, Tao; Munguia-Lopez, Jose G.; Flores-Torres, Salvador Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-04691-9	journal	July 2017
Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography Sutton, Jordan T.; Rajan, Kalavathy; Harper, David P. ACS Applied Materials & Interfaces, Vol. 10, Issue 42 https://doi.org/10.1021/acsami.8b13031	journal	September 2018
Complex 3D bioprinting methods Ji, Shen; Guvendiren, Murat APL Bioengineering, Vol. 5, Issue 1 https://doi.org/10.1063/5.0034901	journal	March 2021
Simultaneous multimaterial multimethod bioprinting Zhou, Hongzhao; Liu, Peng; Gao, Ziqi Bio-Design and Manufacturing, Vol. 5, Issue 3 https://doi.org/10.1007/s42242-022-00203-5	journal	June 2022
Synthesis of novel carvone (meth)acrylate monomers for the production of hydrophilic polymers with high terpene content Montanari, Ulisse; Taresco, Vincenzo; Liguori, Anna Polymer International, Vol. 70, Issue 5 https://doi.org/10.1002/pi.6096	journal	August 2020
Vanillin-Based Resin for Additive Manufacturing Bassett, Alexander W.; Honnig, Amy E.; Breyta, Claire M. ACS Sustainable Chemistry & Engineering, Vol. 8, Issue 14 https://doi.org/10.1021/acssuschemeng.0c00159	journal	March 2020
Digital light processing 3D printing of graphene/carbonyl iron/polymethyl methacrylate nanocomposites for efficient microwave absorption Zuo, Yuxin; Yao, Zhengjun; Lin, Haiyan Composites Part B: Engineering, Vol. 179 https://doi.org/10.1016/j.compositesb.2019.107533	journal	December 2019
Development of bio-acrylic polymers from Cyrene™: transforming a green solvent to a green polymer Ray, Parijat; Hughes, Timothy; Smith, Craig Polymer Chemistry, Vol. 10, Issue 24 https://doi.org/10.1039/C9PY00353C	journal	January 2019
Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications Xu, Shuogui; Xu, Shuogui; Zhou, Panyu International Journal of Nanomedicine https://doi.org/10.2147/IJN.S50685	journal	November 2013
The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing Dong, Ju; Li, Meichun; Zhou, Ling Journal of Polymer Science Part B: Polymer Physics, Vol. 55, Issue 11 https://doi.org/10.1002/polb.24333	journal	April 2017
On the energy efficiency of pre-heating methods in SLM/SLS processes Papadakis, Loucas; Chantzis, Dimitrios; Salonitis, Konstantinos The International Journal of Advanced Manufacturing Technology, Vol. 95, Issue 1-4 https://doi.org/10.1007/s00170-017-1287-9	journal	November 2017
Linalool Derivatives for Natural Product-Based 4D Printing Resins Merckle, David; Constant, Eric; Weems, Andrew C. ACS Sustainable Chemistry & Engineering, Vol. 9, Issue 36 https://doi.org/10.1021/acssuschemeng.1c03760	journal	September 2021
From Silk Spinning to 3D Printing: Polymer Manufacturing using Directed Hierarchical Molecular Assembly Mu, Xuan; Fitzpatrick, Vincent; Kaplan, David L. Advanced Healthcare Materials, Vol. 9, Issue 15 https://doi.org/10.1002/adhm.201901552	journal	February 2020
3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility Weems, Andrew C.; Pérez-Madrigal, Maria M.; Arno, Maria C. Biomacromolecules, Vol. 21, Issue 3 https://doi.org/10.1021/acs.biomac.9b01539	journal	February 2020
Injectable hydrogels for central nervous system therapy Pakulska, Malgosia M.; Ballios, Brian G.; Shoichet, Molly S. Biomedical Materials, Vol. 7, Issue 2 https://doi.org/10.1088/1748-6041/7/2/024101	journal	March 2012
Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs Ji, Shen; Guvendiren, Murat Frontiers in Bioengineering and Biotechnology, Vol. 5 https://doi.org/10.3389/fbioe.2017.00023	journal	April 2017
3D printing of conducting polymers Yuk, Hyunwoo; Lu, Baoyang; Lin, Shen Nature Communications, Vol. 11, Issue 1 https://doi.org/10.1038/s41467-020-15316-7	journal	March 2020
Hybrid Additive Manufacturing of Fused Filament Fabrication and Ultrasonic Consolidation Wu, Wenzheng; Wang, Haiming; Wang, Jiaqi Polymers, Vol. 14, Issue 12 https://doi.org/10.3390/polym14122385	journal	June 2022
Improving the Oxidative Stability of Shape Memory Polyurethanes Containing Tertiary Amines by the Presence of Isocyanurate Triols Weems, A. C.; Carrow, J. K.; Gaharwar, A. K. Macromolecules, Vol. 51, Issue 22 https://doi.org/10.1021/acs.macromol.8b01925	journal	November 2018
Selective laser sintered poly-ε-caprolactone scaffold hybridized with collagen hydrogel for cartilage tissue engineering Chen, Chih-Hao; Shyu, Victor Bong-Hang; Chen, Jyh-Ping Biofabrication, Vol. 6, Issue 1 https://doi.org/10.1088/1758-5082/6/1/015004	journal	January 2014
Cocoa Shell Waste Biofilaments for 3D Printing Applications Tran, Thi Nga; Bayer, Ilker S.; Heredia‐Guerrero, José Alejandro Macromolecular Materials and Engineering, Vol. 302, Issue 11 https://doi.org/10.1002/mame.201700219	journal	August 2017
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems Goyanes, Alvaro; Det-Amornrat, Usanee; Wang, Jie Journal of Controlled Release, Vol. 234 https://doi.org/10.1016/j.jconrel.2016.05.034	journal	July 2016
Postfabrication Functionalization of 4D-Printed Polycarbonate Photopolymer Scaffolds Brooks, Scott L.; Arno, Maria C.; Dove, Andrew P. ACS Applied Polymer Materials, Vol. 4, Issue 8 https://doi.org/10.1021/acsapm.2c00648	journal	July 2022
A novel process route for the production of spherical LBM polymer powders with small size and good flowability Schmidt, Jochen; Sachs, Marius; Blümel, Christina Powder Technology, Vol. 261 https://doi.org/10.1016/j.powtec.2014.04.003	journal	July 2014
Alternating Copolymerization of Epoxides and Cyclic Anhydrides: An Improved Route to Aliphatic Polyesters Jeske, Ryan C.; DiCiccio, Angela M.; Coates, Geoffrey W. Journal of the American Chemical Society, Vol. 129, Issue 37 https://doi.org/10.1021/ja0737568	journal	September 2007
Investigation of in-situ chemical cross-linking during fused filament fabrication process on parts shrinkage reduction and interlayer adhesion Gunasekaran, Harini Bhuvaneswari; Ponnan, Sathiyanathan; Thirunavukkarasu, Naveen Journal of Materials Research and Technology, Vol. 15 https://doi.org/10.1016/j.jmrt.2021.09.046	journal	November 2021
Materials perspective of polymers for additive manufacturing with selective laser sintering Schmid, Manfred; Amado, Antonio; Wegener, Konrad Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.138	journal	July 2014
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties Garzon-Hernandez, S.; Garcia-Gonzalez, D.; Jérusalem, A. Materials & Design, Vol. 188 https://doi.org/10.1016/j.matdes.2019.108414	journal	March 2020
4D Aliphatic photopolymer polycarbonates as direct ink writing of biodegradable, conductive graphite‐composite materials Brooks, Scott; Cartwright, Zachary; Merckle, David Polymer Composites, Vol. 42, Issue 10 https://doi.org/10.1002/pc.26211	journal	July 2021
4D Printing of Shape Memory-Based Personalized Endoluminal Medical Devices Zarek, Matt; Mansour, Nicola; Shapira, Shir Macromolecular Rapid Communications, Vol. 38, Issue 2 https://doi.org/10.1002/marc.201600628	journal	December 2016
Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical µ-3D Printing of Thermosets Lebedevaite, Migle; Ostrauskaite, Jolita; Skliutas, Edvinas Polymers, Vol. 11, Issue 1 https://doi.org/10.3390/polym11010116	journal	January 2019
Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds Sudarmadji, N.; Tan, J. Y.; Leong, K. F. Acta Biomaterialia, Vol. 7, Issue 2 https://doi.org/10.1016/j.actbio.2010.09.024	journal	February 2011
3D printed elastomers with Sylgard-184-like mechanical properties and tuneable degradability Paunović, Nevena; Leroux, Jean-Christophe; Bao, Yinyin Polymer Chemistry, Vol. 13, Issue 16 https://doi.org/10.1039/D2PY00113F	journal	January 2022
3D printing of ceramics: A review Chen, Zhangwei; Li, Ziyong; Li, Junjie Journal of the European Ceramic Society, Vol. 39, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2018.11.013	journal	April 2019
Processing of 45S5 Bioglass® by lithography-based additive manufacturing Tesavibul, Passakorn; Felzmann, Ruth; Gruber, Simon Materials Letters, Vol. 74 https://doi.org/10.1016/j.matlet.2012.01.019	journal	May 2012
Dermal contact with toluene diisocyanate (TDI) produces respiratory tract hypersensitivity in guinea pigs Karol, M. H.; Hauth, B. A.; Riley, E. J. Toxicology and Applied Pharmacology, Vol. 58, Issue 2 https://doi.org/10.1016/0041-008X(81)90426-9	journal	April 1981
High-resolution multiceramic additive manufacturing based on digital light processing Hu, Kehui; Zhao, Pengcheng; Li, Jianjun Additive Manufacturing, Vol. 54 https://doi.org/10.1016/j.addma.2022.102732	journal	June 2022
3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications Markstedt, Kajsa; Mantas, Athanasios; Tournier, Ivan Biomacromolecules, Vol. 16, Issue 5 https://doi.org/10.1021/acs.biomac.5b00188	journal	April 2015
Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling Tarrés, Q.; Melbø, J. K.; Delgado-Aguilar, M. Composites Part B: Engineering, Vol. 153 https://doi.org/10.1016/j.compositesb.2018.07.009	journal	November 2018
3D and 4D Printing of Polymers for Tissue Engineering Applications Tamay, Dilara Goksu; Dursun Usal, Tugba; Alagoz, Ayse Selcen Frontiers in Bioengineering and Biotechnology, Vol. 7 https://doi.org/10.3389/fbioe.2019.00164	journal	July 2019
Catalysis as an Enabling Science for Sustainable Polymers Zhang, Xiangyi; Fevre, Mareva; Jones, Gavin O. Chemical Reviews, Vol. 118, Issue 2 https://doi.org/10.1021/acs.chemrev.7b00329	journal	October 2017
Improved biocomposite development of poly(vinyl alcohol) and hydroxyapatite for tissue engineering scaffold fabrication using selective laser sintering Wiria, Florencia Edith; Chua, Chee Kai; Leong, Kah Fai Journal of Materials Science: Materials in Medicine, Vol. 19, Issue 3 https://doi.org/10.1007/s10856-007-3176-5	journal	August 2007
Monoterpene production by the carotenogenic yeast Rhodosporidium toruloides Zhuang, Xun; Kilian, Oliver; Monroe, Eric Microbial Cell Factories, Vol. 18, Issue 1 https://doi.org/10.1186/s12934-019-1099-8	journal	March 2019
Versatile Ring-Opening Copolymerization and Postprinting Functionalization of Lactone and Poly(propylene fumarate) Block Copolymers: Resorbable Building Blocks for Additive Manufacturing Petersen, Shannon R.; Wilson, James A.; Becker, Matthew L. Macromolecules, Vol. 51, Issue 16 https://doi.org/10.1021/acs.macromol.8b01372	journal	August 2018
Challenges in Organ Transplantation Beyar, Rafael Rambam Maimonides Medical Journal, Vol. 2, Issue 2 https://doi.org/10.5041/RMMJ.10049	journal	April 2011
Catalytic Transformation of Lignocellulose into Chemicals and Fuel Products in Ionic Liquids Zhang, Zhanrong; Song, Jinliang; Han, Buxing Chemical Reviews, Vol. 117, Issue 10 https://doi.org/10.1021/acs.chemrev.6b00457	journal	November 2016
Prospective use of the 3D printing technology for the microstructural engineering of Solid Oxide Fuel Cell components Ruiz-Morales, J. C.; Hernández-Rodríguez, E. M.; Acosta-Mora, P. Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 53, Issue 5 https://doi.org/10.3989/cyv.252014	journal	October 2014
Hydrolytically degradable poly(β-thioether ester ketal) thermosets via radical-mediated thiol–ene photopolymerization Alameda, Benjamin M.; Palmer, Travis C.; Sisemore, Jonathan D. Polymer Chemistry, Vol. 10, Issue 41 https://doi.org/10.1039/C9PY01082C	journal	January 2019
Photopolymerization in 3D Printing Bagheri, Ali; Jin, Jianyong ACS Applied Polymer Materials, Vol. 1, Issue 4 https://doi.org/10.1021/acsapm.8b00165	journal	February 2019
Integrating softwood biorefinery lignin into polyhydroxybutyrate composites and application in 3D printing Vaidya, Alankar A.; Collet, Christophe; Gaugler, Marc Materials Today Communications, Vol. 19 https://doi.org/10.1016/j.mtcomm.2019.02.008	journal	June 2019
Visible light 3D printing with epoxidized vegetable oils Branciforti, Diego Savio; Lazzaroni, Simone; Milanese, Chiara Additive Manufacturing, Vol. 25 https://doi.org/10.1016/j.addma.2018.11.020	journal	January 2019
A short review on 3D printing methods, process parameters and materials Manoj Prabhakar, M.; Saravanan, A. K.; Haiter Lenin, A. Materials Today: Proceedings, Vol. 45 https://doi.org/10.1016/j.matpr.2020.10.225	journal	January 2021
Development of a 95/5 poly(L-lactide-co-glycolide)/hydroxylapatite and β-tricalcium phosphate scaffold as bone replacement material via selective laser sintering Simpson, Rebecca Louise; Wiria, Florencia Edith; Amis, Andrew A. Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 84B, Issue 1 https://doi.org/10.1002/jbm.b.30839	journal	January 2007
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning de Beer, Martin P.; van der Laan, Harry L.; Cole, Megan A. Science Advances, Vol. 5, Issue 1 https://doi.org/10.1126/sciadv.aau8723	journal	January 2019
Progress in material design for biomedical applications Tibbitt, Mark W.; Rodell, Christopher B.; Burdick, Jason A. Proceedings of the National Academy of Sciences, Vol. 112, Issue 47 https://doi.org/10.1073/pnas.1516247112	journal	November 2015
4DMesh Wang, Guanyun; Yang, Humphrey; Yan, Zeyu Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology https://doi.org/10.1145/3242587.3242625	conference	October 2018
Decellularization methods of porcine kidneys for whole organ engineering using a high-throughput system Sullivan, David C.; Mirmalek-Sani, Sayed-Hadi; Deegan, Daniel B. Biomaterials, Vol. 33, Issue 31 https://doi.org/10.1016/j.biomaterials.2012.07.023	journal	November 2012
Thermal localization improves the interlayer adhesion and structural integrity of 3D printed PEEK lumbar spinal cages Basgul, Cemile; MacDonald, Daniel W.; Siskey, Ryan Materialia, Vol. 10 https://doi.org/10.1016/j.mtla.2020.100650	journal	May 2020
Recent advances in 3D printing of biomaterials Chia, Helena N.; Wu, Benjamin M. Journal of Biological Engineering, Vol. 9, Issue 1 https://doi.org/10.1186/s13036-015-0001-4	journal	March 2015
Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification Weems, Andrew C.; Delle Chiaie, Kayla R.; Yee, Rachel Biomacromolecules, Vol. 21, Issue 1 https://doi.org/10.1021/acs.biomac.9b01125	journal	October 2019
Research on the printability of hydrogels in 3D bioprinting He, Yong; Yang, FeiFei; Zhao, HaiMing Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep29977	journal	July 2016
Biobased and Recyclable Polyurethane for Room-Temperature Damping and Three-Dimensional Printing Shou, Tao; Hu, Shikai; Wu, Yaowen ACS Omega, Vol. 6, Issue 44 https://doi.org/10.1021/acsomega.1c04650	journal	October 2021
Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications Celikkin, Nehar; Rinoldi, Chiara; Costantini, Marco Materials Science and Engineering: C, Vol. 78 https://doi.org/10.1016/j.msec.2017.04.016	journal	September 2017
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges Jamróz, Witold; Szafraniec, Joanna; Kurek, Mateusz Pharmaceutical Research, Vol. 35, Issue 9 https://doi.org/10.1007/s11095-018-2454-x	journal	July 2018
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing Kim, Soon Hee; Yeon, Yeung Kyu; Lee, Jung Min Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-03759-y	journal	April 2018
Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality Mülhaupt, Rolf Macromolecular Chemistry and Physics, Vol. 214, Issue 2 https://doi.org/10.1002/macp.201200439	journal	November 2012
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries Bhagia, Samarthya; Bornani, Kamlesh; Agrawal, Ruchi Applied Materials Today, Vol. 24 https://doi.org/10.1016/j.apmt.2021.101078	journal	September 2021
3D Printing of Mixed Matrix Films Based on Metal–Organic Frameworks and Thermoplastic Polyamide 12 by Selective Laser Sintering for Water Applications Li, Rui; Yuan, Shangqin; Zhang, Wang ACS Applied Materials & Interfaces, Vol. 11, Issue 43 https://doi.org/10.1021/acsami.9b11840	journal	September 2019
Effect of the terminal group of phosphonate self-assembled films formed on Ti surfaces on the biomimetic layer formation and cell adhesion Sánchez-Treviño, A. Y.; García-Martínez, O.; Blasco-Avellaneda, D. Applied Surface Science, Vol. 362 https://doi.org/10.1016/j.apsusc.2015.11.174	journal	January 2016
Epoxidized 1,4-polymyrcene Matic, Aleksandar; Hess, Andreas; Schanzenbach, Dirk Polymer Chemistry, Vol. 11, Issue 7 https://doi.org/10.1039/C9PY01783F	journal	January 2020
Non-contact acoustic cell trapping in disposable glass capillaries Hammarström, Björn; Evander, Mikael; Barbeau, Herve Lab on a Chip, Vol. 10, Issue 17 https://doi.org/10.1039/c004504g	journal	January 2010
Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds Lee, Seung-Jae; Kang, Hyun-Wook; Park, Jung Kyu Biomedical Microdevices, Vol. 10, Issue 2 https://doi.org/10.1007/s10544-007-9129-4	journal	September 2007
High-Impact Polystyrene Reinforced with Reduced Graphene Oxide as a Filament for Fused Filament Fabrication 3D Printing Sieradzka, Marta; Fabia, Janusz; Biniaś, Dorota Materials, Vol. 14, Issue 22 https://doi.org/10.3390/ma14227008	journal	November 2021
Photoresins based on acrylated epoxidized soybean oil and benzenedithiols for optical 3D printing Miezinyte, Greta; Ostrauskaite, Jolita; Rainosalo, Egidija Rapid Prototyping Journal, Vol. 25, Issue 2 https://doi.org/10.1108/RPJ-04-2018-0101	journal	March 2019
Research progress on modification of phenolic resin Tang, Kaihong; Zhang, Ailing; Ge, Tiejun Materials Today Communications, Vol. 26 https://doi.org/10.1016/j.mtcomm.2020.101879	journal	March 2021
Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior Li, Zhao; Huang, Sha; Liu, Yufan Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-26407-3	journal	May 2018
The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology Zhao, Yu; Li, Yang; Mao, Shuangshuang Biofabrication, Vol. 7, Issue 4 https://doi.org/10.1088/1758-5090/7/4/045002	journal	November 2015
Chemo-enzymatic pathways toward pinene-based renewable materials Stamm, A.; Tengdelius, M.; Schmidt, B. Green Chemistry, Vol. 21, Issue 10 https://doi.org/10.1039/C9GC00718K	journal	January 2019
Failures and Flaws in Fused Deposition Modeling (FDM) Additively Manufactured Polymers and Composites Baechle-Clayton, Maggie; Loos, Elizabeth; Taheri, Mohammad Journal of Composites Science, Vol. 6, Issue 7 https://doi.org/10.3390/jcs6070202	journal	July 2022
Polymers in Technologies of Additive and Inkjet Printing of Dosage Formulations Blynskaya, Evgenia V.; Tishkov, Sergey V.; Alekseev, Konstantin V. Polymers, Vol. 14, Issue 13 https://doi.org/10.3390/polym14132543	journal	June 2022
Three‐dimensional printing biotechnology for the regeneration of the tooth and tooth‐supporting tissues Ma, Yue; Xie, Li; Yang, Bo Biotechnology and Bioengineering, Vol. 116, Issue 2 https://doi.org/10.1002/bit.26882	journal	December 2018
Shape memory polyurethanes with oxidation-induced degradation: In vivo and in vitro correlations for endovascular material applications Weems, Andrew C.; Wacker, Kevin T.; Carrow, James K. Acta Biomaterialia, Vol. 59 https://doi.org/10.1016/j.actbio.2017.06.030	journal	September 2017
Bioresists from renewable resources as sustainable photoresins for 3D laser microlithography: material synthesis, cross-linking rate and characterization of the structures Skliutas, Edvinas; Kašėtaitė, Sigita; Grigalevičiūtė, Giedrė SPIE Proceedings https://doi.org/10.1117/12.2249600	conference	February 2017
Three-dimensional printing of PLA and PLA/PHA dumbbell-shaped specimens of crisscross and transverse patterns as promising materials in emerging application areas: Prediction study Gonzalez Ausejo, Jennifer; Rydz, Joanna; Musioł, Marta Polymer Degradation and Stability, Vol. 156 https://doi.org/10.1016/j.polymdegradstab.2018.08.008	journal	October 2018
Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing Xu, Wenyang; Pranovich, Andrey; Uppstu, Peter Carbohydrate Polymers, Vol. 187 https://doi.org/10.1016/j.carbpol.2018.01.069	journal	May 2018
3D Printing in Turbomachinery: Overview of Technologies, Applications and Possibilities for Industry 4.0 Novotny, Vaclav; Spale, Jan; Stunova, Barbora Bryksi Volume 6: Ceramics; Controls, Diagnostics, and Instrumentation; Education; Manufacturing Materials and Metallurgy https://doi.org/10.1115/gt2019-91849	conference	June 2019
Semicrystalline Non-Isocyanate Polyhydroxyurethanes as Thermoplastics and Thermoplastic Elastomers and Their Use in 3D Printing by Fused Filament Fabrication Schimpf, Vitalij; Max, Johannes B.; Stolz, Benjamin Macromolecules, Vol. 52, Issue 1 https://doi.org/10.1021/acs.macromol.8b01908	journal	December 2018
3D Printed CO ₂ ‐Based Triblock Copolymers and Post‐Printing Modification Wei, Peiran; Bhat, Gulzar A.; Cipriani, Ciera E. Angewandte Chemie International Edition, Vol. 61, Issue 37 https://doi.org/10.1002/anie.202208355	journal	August 2022
Dielectrophoresis tweezers for single cell manipulation Hunt, T. P.; Westervelt, R. M. Biomedical Microdevices, Vol. 8, Issue 3 https://doi.org/10.1007/s10544-006-8170-z	journal	May 2006
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles Fantino, Erika; Chiappone, Annalisa; Roppolo, Ignazio Advanced Materials, Vol. 28, Issue 19 https://doi.org/10.1002/adma.201505109	journal	May 2016
Elastic mesh with thermoplastic polyurethane filaments preserves effective porosity of textile implants Lambertz, Andreas; Vogels, Ruben R. M.; Binnebösel, Marcel Journal of Biomedical Materials Research Part A, Vol. 103, Issue 8 https://doi.org/10.1002/jbm.a.35411	journal	February 2015
Advanced Bioinks for 3D Printing: A Materials Science Perspective Chimene, David; Lennox, Kimberly K.; Kaunas, Roland R. Annals of Biomedical Engineering, Vol. 44, Issue 6 https://doi.org/10.1007/s10439-016-1638-y	journal	May 2016
Snakegourd root/Astragalus polysaccharide hydrogel preparation and application in 3D printing Yan, Jinxin; Wang, Yu; Zhang, Xuan International Journal of Biological Macromolecules, Vol. 121 https://doi.org/10.1016/j.ijbiomac.2018.10.008	journal	January 2019
3D bioprinting of tissue-specific osteoblasts and endothelial cells to model the human jawbone Amler, Anna-Klara; Thomas, Alexander; Tüzüner, Selin Scientific Reports, Vol. 11, Issue 1 https://doi.org/10.1038/s41598-021-84483-4	journal	March 2021
Fused Filament Fabrication of a Dynamically Crosslinked Network Derived from Commodity Thermoplastics Prasanna Kar, Goutam; Lin, Xueyan; Terentjev, Eugene Michael ACS Applied Polymer Materials, Vol. 4, Issue 6 https://doi.org/10.1021/acsapm.2c00340	journal	May 2022
Sintering in Laser Sintering Bourell, David L. JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-015-1780-2	journal	January 2016
Isolation of diterpenoids from sugi wood-drying byproducts and their bioactivities Tsujimura, Maiko; Goto, Manami; Tsuji, Minori Journal of Wood Science, Vol. 65, Issue 1 https://doi.org/10.1186/s10086-019-1787-3	journal	April 2019
Biobased Epoxidized Vegetable Oils and Its Greener Epoxy Blends: A Review Tan, S. G.; Chow, W. S. Polymer-Plastics Technology and Engineering, Vol. 49, Issue 15 https://doi.org/10.1080/03602559.2010.512338	journal	November 2010
Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process Kim, Yong Bok; Lee, Hyeongjin; Kim, Geun Hyung ACS Applied Materials & Interfaces, Vol. 8, Issue 47 https://doi.org/10.1021/acsami.6b11669	journal	November 2016
Myrcenol-Based Monomer for Carbanionic Polymerization: Functional Copolymers with Myrcene and Bio-Based Graft Copolymers Wahlen, Christian; Rauschenbach, Moritz; Blankenburg, Jan Macromolecules, Vol. 53, Issue 20 https://doi.org/10.1021/acs.macromol.0c01734	journal	October 2020
Stereochemistry and stoichiometry in aliphatic polyester photopolymers for 3D printing tailored biomaterial scaffolds Brooks, S. L.; Constant, E. J.; King, O. M. Polymer Chemistry, Vol. 13, Issue 14 https://doi.org/10.1039/D1PY01405F	journal	January 2022
Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives Dong, Chanjuan; Lv, Yonggang Polymers, Vol. 8, Issue 2 https://doi.org/10.3390/polym8020042	journal	February 2016
Transformative Appetite Wang, Wen; Yao, Lining; Zhang, Teng Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems https://doi.org/10.1145/3025453.3026019	conference	May 2017
Biodegradable polymers as biomaterials Nair, Lakshmi S.; Laurencin, Cato T. Progress in Polymer Science, Vol. 32, Issue 8-9 https://doi.org/10.1016/j.progpolymsci.2007.05.017	journal	August 2007
Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications Loo, Yihua; Hauser, Charlotte A. E. Biomedical Materials, Vol. 11, Issue 1 https://doi.org/10.1088/1748-6041/11/1/014103	journal	December 2015
Dynamic array generation and pattern formation for optical tweezers Mogensen, Paul C.; Glückstad, Jesper Optics Communications, Vol. 175, Issue 1-3 https://doi.org/10.1016/S0030-4018(00)00449-1	journal	February 2000
Toughening of photo-curable polymer networks: a review Ligon-Auer, Samuel Clark; Schwentenwein, Martin; Gorsche, Christian Polymer Chemistry, Vol. 7, Issue 2 https://doi.org/10.1039/C5PY01631B	journal	January 2016
Experimental Investigation of SLS Process for Flexural Strength Improvement of PA-3200GF Parts Negi, Sushant; Sharma, Rajesh Kumar; Dhiman, Suresh Materials and Manufacturing Processes, Vol. 30, Issue 5 https://doi.org/10.1080/10426914.2014.994750	journal	December 2014
New separation method for terpenoids in byproducts discharged during sugi wood-drying process, and purification of ferruginol Tsujimura, Maiko; Tsuji, Minori; Kofujita, Hisayoshi Journal of Wood Science, Vol. 61, Issue 3 https://doi.org/10.1007/s10086-015-1471-1	journal	March 2015
UV-Curable Bio-Based Polymers Derived from Industrial Pulp and Paper Processes Pezzana, Lorenzo; Malmström, Eva; Johansson, Mats Polymers, Vol. 13, Issue 9 https://doi.org/10.3390/polym13091530	journal	May 2021
Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method He, Rongxuan; Liu, Wei; Wu, Ziwei Ceramics International, Vol. 44, Issue 3 https://doi.org/10.1016/j.ceramint.2017.11.135	journal	February 2018
3D printing of an interpenetrating network hydrogel material with tunable viscoelastic properties Bootsma, Katherine; Fitzgerald, Martha M.; Free, Brandon Journal of the Mechanical Behavior of Biomedical Materials, Vol. 70 https://doi.org/10.1016/j.jmbbm.2016.07.020	journal	June 2017
Terpene- and terpenoid-based polymeric resins for stereolithography 3D printing Weems, Andrew C.; Delle Chiaie, Kayla R.; Worch, Joshua C. Polymer Chemistry, Vol. 10, Issue 44 https://doi.org/10.1039/C9PY00950G	journal	January 2019
Exploration of Bio-Based Functionalized Sucrose Ester Resins for Additive Manufacturing via Stereolithography Silbert, Samantha D.; Simpson, Patrick; Setien, Raul ACS Applied Polymer Materials, Vol. 2, Issue 7 https://doi.org/10.1021/acsapm.0c00417	journal	June 2020
Interface design of environmentally friendly carbon nanotube-filled polyester composites: Fabrication, characterisation, functionality and application Wu, C. S.; Liao, H. T. Express Polymer Letters, Vol. 11, Issue 3 https://doi.org/10.3144/expresspolymlett.2017.20	journal	January 2017
Renewable resource-based elastomer nanocomposite derived from myrcene, ethanol, itaconic acid and nanosilica: Design, preparation and properties Lei, Weiwei; Yang, Xixi; Qiao, He European Polymer Journal, Vol. 106 https://doi.org/10.1016/j.eurpolymj.2018.04.006	journal	September 2018
Polymers for 3D Printing and Customized Additive Manufacturing Ligon, Samuel Clark; Liska, Robert; Stampfl, Jürgen Chemical Reviews, Vol. 117, Issue 15 https://doi.org/10.1021/acs.chemrev.7b00074	journal	July 2017
Terpene-Based Renewable Monomers and Polymers via Thiol–Ene Additions Firdaus, Maulidan; Montero de Espinosa, Lucas; Meier, Michael A. R. Macromolecules, Vol. 44, Issue 18 https://doi.org/10.1021/ma201544e	journal	September 2011
Novel Materials for 3D Printing by Photopolymerization Layani, Michael; Wang, Xiaofeng; Magdassi, Shlomo Advanced Materials, Vol. 30, Issue 41 https://doi.org/10.1002/adma.201706344	journal	May 2018
Sustainable near UV-curable acrylates based on natural phenolics for stereolithography 3D printing Ding, Rui; Du, Yuyang; Goncalves, Rebecca B. Polymer Chemistry, Vol. 10, Issue 9 https://doi.org/10.1039/C8PY01652F	journal	January 2019
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Williams, Jessica M.; Adewunmi, Adebisi; Schek, Rachel M. Biomaterials, Vol. 26, Issue 23 https://doi.org/10.1016/j.biomaterials.2004.11.057	journal	August 2005
Magnesium Catalyzed Polymerization of End Functionalized Poly(propylene maleate) and Poly(propylene fumarate) for 3D Printing of Bioactive Scaffolds Wilson, James A.; Luong, Derek; Kleinfehn, Alex P. Journal of the American Chemical Society, Vol. 140, Issue 1 https://doi.org/10.1021/jacs.7b09978	journal	December 2017
4D Printing of Resorbable Complex Shape-Memory Poly(propylene fumarate) Star Scaffolds Le Fer, Gaëlle; Becker, Matthew L. ACS Applied Materials & Interfaces, Vol. 12, Issue 20 https://doi.org/10.1021/acsami.0c01444	journal	April 2020
4D Printing of a Fully Biobased Shape Memory Copolyester via a UV-Assisted FDM Strategy Wu, Di; Leng, Ying-Mei; Fan, Cheng-Jie ACS Sustainable Chemistry & Engineering, Vol. 10, Issue 19 https://doi.org/10.1021/acssuschemeng.2c00721	journal	May 2022
Ring-Opening Copolymerization of Epoxides and Cyclic Anhydrides with Discrete Metal Complexes: Structure–Property Relationships Longo, Julie M.; Sanford, Maria J.; Coates, Geoffrey W. Chemical Reviews, Vol. 116, Issue 24 https://doi.org/10.1021/acs.chemrev.6b00553	journal	December 2016
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate Miao, Shida; Zhu, Wei; Castro, Nathan J. Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep27226	journal	June 2016
Ring-Opening Copolymerization of Maleic Anhydride with Epoxides: A Chain-Growth Approach to Unsaturated Polyesters DiCiccio, Angela M.; Coates, Geoffrey W. Journal of the American Chemical Society, Vol. 133, Issue 28 https://doi.org/10.1021/ja203520p	journal	July 2011
A One-Pot Synthesis of a Triblock Copolymer from Propylene Oxide/Carbon Dioxide and Lactide: Intermediacy of Polyol Initiators Darensbourg, Donald J.; Wu, Guang-Peng Angewandte Chemie International Edition, Vol. 52, Issue 40 https://doi.org/10.1002/anie.201304778	journal	August 2013
3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair Jang, Jinah; Park, Hun-Jun; Kim, Seok-Won Biomaterials, Vol. 112 https://doi.org/10.1016/j.biomaterials.2016.10.026	journal	January 2017
Effect of Chemical and Physical Properties on the In Vitro Degradation of 3D Printed High Resolution Poly(propylene fumarate) Scaffolds Walker, Jason M.; Bodamer, Emily; Krebs, Olivia Biomacromolecules, Vol. 18, Issue 4 https://doi.org/10.1021/acs.biomac.7b00146	journal	March 2017
Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials Woods, Hannah; Boddorff, Andrew; Ewaldz, Elena Propellants, Explosives, Pyrotechnics, Vol. 45, Issue 1 https://doi.org/10.1002/prep.201900159	journal	October 2019
Studies on the synthesis and properties of terpene-phenol-aldehyde resin with a high softening point Wang, Shi-Fa; Furuno, Takeshi; Cheng, Zhi Journal of Wood Science, Vol. 46, Issue 2 https://doi.org/10.1007/BF00777361	journal	April 2000
Bioprinting multidimensional constructs: a quantitative approach to understanding printed cell density and redistribution phenomena Ding, Houzhu; Tourlomousis, Filippos; Chang, Robert C. Biomedical Physics & Engineering Express, Vol. 3, Issue 3 https://doi.org/10.1088/2057-1976/aa70f0	journal	May 2017
3D Printable Filaments Made of Biobased Polyethylene Biocomposites Filgueira, Daniel; Holmen, Solveig; Melbø, Johnny Polymers, Vol. 10, Issue 3 https://doi.org/10.3390/polym10030314	journal	March 2018
3D printing: Principles and pharmaceutical applications of selective laser sintering Awad, Atheer; Fina, Fabrizio; Goyanes, Alvaro International Journal of Pharmaceutics, Vol. 586 https://doi.org/10.1016/j.ijpharm.2020.119594	journal	August 2020
Dynamic holographic optical tweezers Curtis, Jennifer E.; Koss, Brian A.; Grier, David G. Optics Communications, Vol. 207, Issue 1-6 https://doi.org/10.1016/S0030-4018(02)01524-9	journal	June 2002
Printability–A key issue in extrusion-based bioprinting Naghieh, Saman; Chen, Xiongbiao Journal of Pharmaceutical Analysis, Vol. 11, Issue 5 https://doi.org/10.1016/j.jpha.2021.02.001	journal	October 2021
Current advances and future perspectives of 3D printing natural-derived biopolymers Liu, Jun; Sun, Lushan; Xu, Wenyang Carbohydrate Polymers, Vol. 207 https://doi.org/10.1016/j.carbpol.2018.11.077	journal	March 2019
Degradation Rates of Plastics in the Environment Chamas, Ali; Moon, Hyunjin; Zheng, Jiajia ACS Sustainable Chemistry & Engineering, Vol. 8, Issue 9 https://doi.org/10.1021/acssuschemeng.9b06635	journal	February 2020
Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues Dikyol, Caner; Altunbek, Mine; Bartolo, Paulo Bioprinting, Vol. 24 https://doi.org/10.1016/j.bprint.2021.e00159	journal	December 2021
Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants Khalyfa, Alaadien; Vogt, Sebastian; Weisser, Jürgen Journal of Materials Science: Materials in Medicine, Vol. 18, Issue 5 https://doi.org/10.1007/s10856-006-0073-2	journal	January 2007
Catalytic Ring-Opening Copolymerization of Limonene Oxide and Phthalic Anhydride: Toward Partially Renewable Polyesters Nejad, Elham Hosseini; Paoniasari, Anita; van Melis, Carlo G. W. Macromolecules, Vol. 46, Issue 3 https://doi.org/10.1021/ma301904y	journal	January 2013
Tensile properties of polyhydroxyalkanoate/polycaprolactone blends studied by rheo-optical near-infrared (NIR) spectroscopy Nishida, Masahiro; Ogura, Takashi; Shinzawa, Hideyuki Journal of Molecular Structure, Vol. 1124 https://doi.org/10.1016/j.molstruc.2016.04.020	journal	November 2016
CO₂-Driven stereochemical inversion of sugars to create thymidine-based polycarbonates by ring-opening polymerisation Gregory, Georgina L.; Hierons, Elizabeth M.; Kociok-Köhn, Gabriele Polymer Chemistry, Vol. 8, Issue 10 https://doi.org/10.1039/C7PY00118E	journal	January 2017
Comparative Studies on Polyurethane Composites Filled with Polyaniline and Graphene for DLP-Type 3D Printing Joo, Hyeonseo; Cho, Sunghun Polymers, Vol. 12, Issue 1 https://doi.org/10.3390/polym12010067	journal	January 2020
Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle Emmermacher, Julia; Spura, David; Cziommer, Jasmina Biofabrication, Vol. 12, Issue 2 https://doi.org/10.1088/1758-5090/ab7553	journal	March 2020
Dielectrophoresis-based cell manipulation using electrodes on a reusable printed circuit board Park, Kidong; Suk, Ho-Jun; Akin, Demir Lab on a Chip, Vol. 9, Issue 15 https://doi.org/10.1039/b904328d	journal	January 2009
Poly(ε-caprolactone-co-p-dioxanone): a Degradable and Printable Copolymer for Pliable 3D Scaffolds Fabrication toward Adipose Tissue Regeneration Fuoco, Tiziana; Ahlinder, Astrid; Jain, Shubham Biomacromolecules, Vol. 21, Issue 1 https://doi.org/10.1021/acs.biomac.9b01126	journal	September 2019
Designing Biomaterials for 3D Printing Guvendiren, Murat; Molde, Joseph; Soares, Rosane M. D. ACS Biomaterials Science & Engineering, Vol. 2, Issue 10 https://doi.org/10.1021/acsbiomaterials.6b00121	journal	April 2016
Synthesis and characterization of high cis‐polymyrcene using neodymium‐based catalysts Díaz de León Gómez, Ramón Enrique; Enríquez‐Medrano, Francisco Javier; Maldonado Textle, Hortensia The Canadian Journal of Chemical Engineering, Vol. 94, Issue 5 https://doi.org/10.1002/cjce.22458	journal	March 2016
Reactive Processing in Extrusion-Based 3D Printing to Improve Isotropy and Mechanical Properties Levenhagen, Neiko P.; Dadmun, Mark D. Macromolecules, Vol. 52, Issue 17 https://doi.org/10.1021/acs.macromol.9b01178	journal	August 2019
Fused Deposition Modelling of Natural Fibre/Polylactic Acid Composites Stoof, David; Pickering, Kim; Zhang, Yuanji Journal of Composites Science, Vol. 1, Issue 1 https://doi.org/10.3390/jcs1010008	journal	August 2017
Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application Han, Yanting; Wei, Qianqian; Chang, Pengbo Crystals, Vol. 11, Issue 4 https://doi.org/10.3390/cryst11040353	journal	March 2021

Similar Records

Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing

Journal Article · 2017 · Journal of Industrial Ecology · OSTI ID:1395598

On the additive manufacturing (3D printing) of viscoelastic materials and flow behavior: From composites to food manufacturing

Journal Article · 2021 · Additive Manufacturing · OSTI ID:1820759

Dielectric breakdown of additively manufactured polymeric materials

Journal Article · 2016 · IEEE Transactions on Dielectrics and Electrical Insulation · OSTI ID:1329891

Related Subjects

Materials Science
Polymer Science

3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing

Citation Formats

References (290)

Similar Records

Related Subjects