Impact of reattachment surface characteristics on the flow field generated by slot jet reattachment nozzle – A numerical study

Asar, Munevver Elif; Yang, Mengqiao; Yagoobi, Jamal

doi:10.1080/07373937.2022.2150862

Impact of reattachment surface characteristics on the flow field generated by slot jet reattachment nozzle – A numerical study

Journal Article · 02 December 2022 · Drying Technology

DOI:https://doi.org/10.1080/07373937.2022.2150862· OSTI ID:2418764

^[1]; ^[2]; Yagoobi, Jamal ^[2]

Center for Advanced Research in Drying, Worcester Polytechnic Institute, Worcester, Massachusetts, USA; OSTI
Center for Advanced Research in Drying, Worcester Polytechnic Institute, Worcester, Massachusetts, USA

Not provided.

Research Organization:: Worcester Polytechnic Institute, MA (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

DOE Contract Number:: EE0009125

OSTI ID:: 2418764

Journal Information:: Drying Technology, Journal Name: Drying Technology Journal Issue: 8 Vol. 41; ISSN 0737-3937

Publisher:: Taylor & Francis

Country of Publication:: United States

Language:: English

References (42)

Experimental and numerical investigation of the influence of nozzle design on the industrial convection drying of thin films Nienke, Tobias; Embrechts, Heidemarie; Kwade, Arno Drying Technology, Vol. 40, Issue 13 https://doi.org/10.1080/07373937.2021.1954941	journal	August 2021
A Numerical Study of Heat Transfer From an Array of Jets Impinging on a Flat Moving Surface Shah, Sanil Journal of Heat Transfer, Vol. 144, Issue 4 https://doi.org/10.1115/1.4053451	journal	February 2022
Cake baking in tunnel type multi-zone industrial ovens Part II. Evaluation of quality parameters Baik, O. D.; Marcotte, M.; Castaigne, F. Food Research International, Vol. 33, Issue 7 https://doi.org/10.1016/S0963-9969(00)00096-X	journal	August 2000
Impinging radial and inline jets: A comparison with regard to heat transfer, wall pressure distribution, and pressure loss Peper, F.; Leiner, W.; Fiebig, M. Experimental Thermal and Fluid Science, Vol. 14, Issue 2 https://doi.org/10.1016/S0894-1777(96)00066-0	journal	February 1997
Enhancement of heat transfer and product quality using jet reattachment nozzles in drying of food products Farzad, Milad; El Ferouali, Hicham; Kahraman, Ozan Drying Technology, Vol. 40, Issue 2 https://doi.org/10.1080/07373937.2020.1804927	journal	August 2020
Effect of Surface Motion on Transport Processes Due to Circular Impinging Jets—A Numerical Study Chattopadhyay, Himadri Drying Technology, Vol. 24, Issue 11 https://doi.org/10.1080/07373930600951117	journal	November 2006
Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle Katti, Vadiraj; Prabhu, S. V. International Journal of Heat and Mass Transfer, Vol. 51, Issue 17-18 https://doi.org/10.1016/j.ijheatmasstransfer.2007.12.024	journal	August 2008
A Modern Review on Jet Impingement Heat Transfer Methods Ekkad, Srinath V.; Singh, Prashant Journal of Heat Transfer, Vol. 143, Issue 6 https://doi.org/10.1115/1.4049496	journal	April 2021
Heat transfer between an impinging jet and a continuously moving flat surface Raju, K. Subba; Schlünder, E. U. Wärme- und Stoffübertragung, Vol. 10, Issue 2 https://doi.org/10.1007/BF01682706	journal	June 1977
Effect of hot air impingement drying on drying behavior, volatile components profile, shell burst ratio, flavonoid contents, microstructure of Amomum villosum fruits Ai, Ziping; Xiao, Hongwei; Zhang, Yue Drying Technology, Vol. 41, Issue 1 https://doi.org/10.1080/07373937.2022.2087184	journal	June 2022
Turbulent flow and heat transfer from a slot jet impinging on a moving plate Chattopadhyay, Himadri; Saha, Sujoy K. International Journal of Heat and Fluid Flow, Vol. 24, Issue 5 https://doi.org/10.1016/S0142-727X(03)00062-6	journal	October 2003
Effects of nozzle-inlet chamfering on pressure drop and heat transfer in confined air jet impingement Brignoni, Luis A.; Garimella, Suresh V. International Journal of Heat and Mass Transfer, Vol. 43, Issue 7 https://doi.org/10.1016/S0017-9310(99)00207-0	journal	April 2000
Bakery product characteristics as influenced by convection heat flux Zareifard, M. R.; Boissonneault, V.; Marcotte, M. Food Research International, Vol. 42, Issue 7 https://doi.org/10.1016/j.foodres.2009.03.008	journal	August 2009
Drying Characteristics of slot jet Reattachment Nozzle and Comparison with a slot jet Nozzle Alam, S. A.; Seyed-Yagoobi, J.; Narayanan, V. Drying Technology, Vol. 16, Issue 8 https://doi.org/10.1080/07373939808917481	journal	January 1998
Optimisation of the energy efficiency of bread-baking ovens using a combined experimental and computational approach Khatir, Zinedine; Paton, Joe; Thompson, Harvey Applied Energy, Vol. 112 https://doi.org/10.1016/j.apenergy.2013.02.034	journal	December 2013
Enhancement of Heat and Mass Transfer with Innovative Impinging Jets Seyed-Yagoobi, J. Drying Technology, Vol. 14, Issue 5 https://doi.org/10.1080/07373939608917143	journal	January 1996
Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle Narayanan, V.; Seyed-Yagoobi, J.; Page, R. H. Journal of Heat Transfer, Vol. 120, Issue 2 https://doi.org/10.1115/1.2824255	journal	May 1998
Numerical Analysis of Convective heat Transfer from a Moving Plate Cooled by an Array of Submerged Planar jets Chen, J.; Wang, T.; Zumbrunnen, D. A. Numerical Heat Transfer, Part A: Applications, Vol. 26, Issue 2 https://doi.org/10.1080/10407789408955985	journal	August 1994
Numerical Study of Heat Transfer and Fluid Flow in Multiple turbulent Impinging Jets Shiravi, A. H.; Mujumdar, A. S.; Kubes, G. J. Drying Technology, Vol. 13, Issue 5-7 https://doi.org/10.1080/07373939508917027	journal	January 1995
Drying of moist cookie doughs with innovative slot jet reattachment nozzle Farzad, Milad; Yagoobi, Jamal Drying Technology, Vol. 39, Issue 2 https://doi.org/10.1080/07373937.2020.1729173	journal	February 2020
A Numerical Study on the Convective Heat Transfer Characteristics of Pulsed Impingement Drying Jiang, Ying; Xu, Peng; Mujumdar, Arun S. Drying Technology, Vol. 30, Issue 10 https://doi.org/10.1080/07373937.2012.683121	journal	August 2012
Effect of nozzle geometry on local convective heat transfer to a confined impinging air jet Colucci, D. W.; Viskanta, R. Experimental Thermal and Fluid Science, Vol. 13, Issue 1 https://doi.org/10.1016/0894-1777(96)00015-5	journal	July 1996
Heat Transfer Enhancement of Ionic Wind Assisted Slot Jet Reattachment Nozzle: A Numerical Study Yang, Mengqiao; Yagoobi, Jamal; Tilley, Burt Journal of Heat Transfer, Vol. 144, Issue 7 https://doi.org/10.1115/1.4054156	journal	April 2022
Humidity change and its effects on baking in an electrically heated air jet impingement oven Xue, J.; Walker, C. E. Food Research International, Vol. 36, Issue 6 https://doi.org/10.1016/S0963-9969(02)00221-1	journal	January 2003
Modeling radio frequency heating of food moving on a conveyor belt Chen, Jiajia; Lau, Soon Kiat; Chen, Long Food and Bioproducts Processing, Vol. 102 https://doi.org/10.1016/j.fbp.2017.01.009	journal	March 2017
Symmetry and Symmetry-Breaking Bifurcations in Fluid Dynamics Crawford, J. D.; Knobloch, E. Annual Review of Fluid Mechanics, Vol. 23, Issue 1 https://doi.org/10.1146/annurev.fl.23.010191.002013	journal	January 1991
Performance of a convective, infrared and combined infrared- convective heated conveyor-belt dryer El-Mesery, Hany S.; Mwithiga, Gikuru Journal of Food Science and Technology, Vol. 52, Issue 5 https://doi.org/10.1007/s13197-014-1347-1	journal	April 2014
Air impingement drying of digestate Boy, Virginie; Liu, Xiaojun; Chamaa, Mohamad-Amr Chemical Engineering Research and Design, Vol. 146 https://doi.org/10.1016/j.cherd.2019.03.033	journal	June 2019
Energy-efficient thermal drying using impinging-jets with time-varying heat input – A computational study Kurnia, Jundika C.; Sasmito, Agus P.; Tong, Wei Journal of Food Engineering, Vol. 114, Issue 2 https://doi.org/10.1016/j.jfoodeng.2012.08.029	journal	January 2013
Flow and Heat Transfer Characteristics of Confined Noncircular Turbulent Impinging Jets Zhao, Wennan; Kumar, Kurichi; Mujumdar, A. S. Drying Technology, Vol. 22, Issue 9 https://doi.org/10.1081/DRT-200034239	journal	December 2004
Prediction of energy and exergy of mushroom slices drying in hot air impingement dryer by artificial neural network Liu, Zi-Liang; Bai, Jun-Wen; Wang, Shu-Xi Drying Technology, Vol. 38, Issue 15 https://doi.org/10.1080/07373937.2019.1607873	journal	April 2019
Cake baking in tunnel type multi-zone industrial ovens Part I. Characterization of baking conditions Baik, O. D.; Marcotte, M.; Castaigne, F. Food Research International, Vol. 33, Issue 7 https://doi.org/10.1016/S0963-9969(00)00095-8	journal	August 2000
Effect of high-humidity hot air impingement blanching (HHAIB) and drying parameters on drying characteristics and quality of broccoli florets Liu, Zi-Liang; Bai, Jun-Wen; Yang, Wen-Xia Drying Technology, Vol. 37, Issue 10 https://doi.org/10.1080/07373937.2018.1494185	journal	January 2019
Numerical simulation of transport phenomena due to array of round jets impinging on hot moving surface Kadiyala, Phani Krishna; Chattopadhyay, Himadri Drying Technology, Vol. 35, Issue 14 https://doi.org/10.1080/07373937.2016.1275672	journal	July 2017
Convective Air Drying of Stationary and Moving Moist Porous Medium With Slot Jet Reattachment Nozzle: A Numerical Study Farzad, Milad; Yagoobi, Jamal Volume 11: Heat Transfer and Thermal Engineering https://doi.org/10.1115/IMECE2020-24241	conference	November 2020
Radial jet reattachment force Page, R. H.; Carbone, J.; Ostowari, C. Experiments in Fluids, Vol. 8, Issue 5 https://doi.org/10.1007/BF00187233	journal	February 1990
A systematic review on the recent advances of the energy efficiency improvements in non-conventional food drying technologies Menon, Abhay; Stojceska, Valentina; Tassou, Savvas A. Trends in Food Science & Technology, Vol. 100 https://doi.org/10.1016/j.tifs.2020.03.014	journal	June 2020
Effect of Impingement Surface Velocity on Slot Jet and Slot Jet Reattachment Nozzles’ Flow Field Farzad, M.; Yagoobi, J. Volume 7: Fluids Engineering https://doi.org/10.1115/IMECE2019-11404	conference	November 2019
Heat Transfer Measurements From a Surface With Uniform Heat Flux and an Impinging Jet Baughn, J. W.; Shimizu, S. Journal of Heat Transfer, Vol. 111, Issue 4 https://doi.org/10.1115/1.3250776	journal	November 1989
The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet Lee, Jungho; Lee, Sang-Joon International Journal of Heat and Mass Transfer, Vol. 43, Issue 4 https://doi.org/10.1016/S0017-9310(99)00167-2	journal	February 2000
Flow field analysis of a turbulent slot air jet impinging on a moving flat surface Senter, J.; Solliec, C. International Journal of Heat and Fluid Flow, Vol. 28, Issue 4 https://doi.org/10.1016/j.ijheatfluidflow.2006.08.002	journal	August 2007
Convective Heat and Mass Transfer in the Stagnation Region of a Laminar Planar Jet Impinging on a Moving Surface Zumbrunnen, D. A. Journal of Heat Transfer, Vol. 113, Issue 3 https://doi.org/10.1115/1.2910603	journal	August 1991

Similar Records

Drying characteristics of slot jet reattachment nozzle and comparison with a slot jet nozzle

Journal Article · 1998 · Drying Technology · OSTI ID:675605

Comparison of heat transfer characteristics of a slot jet reattachment nozzle and a conventional slot jet nozzle

Book · 1996 · OSTI ID:445530

Comparison of heat transfer characteristics of radial jet reattachment nozzle to in-line impinging jet nozzle

Book · 1996 · OSTI ID:428138

Related Subjects

Engineering

Impact of reattachment surface characteristics on the flow field generated by slot jet reattachment nozzle – A numerical study

Citation Formats

References (42)

Similar Records

Related Subjects