Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Polymer Retention “Tailing” Phenomenon Associated with the Milne Point Polymer Flood

Journal Article · · SPE Journal
DOI:https://doi.org/10.2118/209354-PA· OSTI ID:2418167
Summary

Associated with the Milne Point polymer flood (on Alaska’s North Slope), this paper explores the unusual shape of hydrolyzed polyacrylamides (HPAM) breakout/propagation during dynamic polymer retention measurements in Milne Point core material. In contrast to conventional expectations, polymer retention does not delay the initial polymer arrival at the end of a Milne Point core. However, after effluent polymer concentrations rapidly rise to at least 50% of the injected value, the concentration gradually “tails” up over many pore volumes (PVs) before it finally achieves the injected value. To understand the origin and significance of this behavior, a wide range of core experiments were performed, including substantial variations in polymer concentration and molecular weight, core length, preservation state, sand grain size, and mineral composition. Illite was identified as primarily responsible for the tailing phenomenon. This phenomenon has important consequences that must be considered when projecting the performance of the field project. This work suggests that mineralogy analysis (especially for illite and kaolinite) may reveal whether tailing should be accounted for during simulations of polymer propagation/retention in a given field application.

Research Organization:
Univ. of Alaska, Fairbanks, AK (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
FE0031606
OSTI ID:
2418167
Journal Information:
SPE Journal, Journal Name: SPE Journal Journal Issue: 05 Vol. 27; ISSN 1086-055X
Publisher:
Society of Petroleum Engineers (SPE)
Country of Publication:
United States
Language:
English

References (19)

Enhancing Heavy-Oil-Recovery Efficiency by Combining Low-Salinity-Water and Polymer Flooding journal November 2020
Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Coring operations, core sedimentology, and lithostratigraphy journal February 2011
How Much Polymer Should Be Injected During a Polymer Flood? Review of Previous and Current Practices journal June 2016
Effect of Concentration on HPAM Retention in Porous Media journal January 2014
Morphology of Clay Minerals in the Smectite-to-Illite Conversion Series by Scanning Electron Microscopy journal April 1986
Polyacrylamide Adsorption and Readsorption in Sandstone Porous Media journal December 2019
Characterization of Wettability From Spontaneous Imbibition Measurements journal December 1999
First Ever Polymer Flood Field Pilot - A Game Changer to Enhance the Recovery of Heavy Oils on Alaska’s North Slope conference April 2019
Heavy Oil Polymer EOR in the Challenging Alaskan Arctic - It Works! conference January 2021
The Effect of the Presence of Oil on Polymer Retention in Porous Media from Clastic Reservoirs in the Sultanate of Oman conference March 2018
Transport of HPAM Solutions in low Permeability Porous Media: Impacts of Salinity and Clay Content conference June 2019
Universal viscosifying behavior of acrylamide-based polymers used in enhanced oil recovery journal September 2020
First Ever Polymer Flood Field Pilot to Enhance the Recovery of Heavy Oils on Alaska's North Slope—Polymer Injection Performance conference January 2019
Dispersion in tracer flow in fractured geothermal systems journal April 1983
Scaling Laboratory-Data Surfactant-Imbibition Rates to the Field in Fractured-Shale Formations journal February 2016
Pressure Barrier Applicability to Polymer Flood Design conference April 2022
Laboratory Evaluation of Polymer Retention in a Heavy Oil Sand for a Polymer Flooding Application on Alaska's North Slope journal May 2020
Effects of Velocity and Permeability on Tracer Dispersion in Porous Media journal May 2021
Field vs. Laboratory Polymer-Retention Values for a Polymer Flood in the Tambaredjo Field journal May 2014