Material selection and manufacturing for high-temperature heat exchangers: Review of state-of-the-art development, opportunities, and challenges

Cramer, Corson L.; Lara‐Curzio, Edgar; Elliott, Amy M.; Aguirre, Trevor G.; Yoon, Bola; Fricke, Brian A.; Rao, Vivek; Jain, Prashant; Nawaz, Kashif

doi:10.1002/ces2.10230

Material selection and manufacturing for high-temperature heat exchangers: Review of state-of-the-art development, opportunities, and challenges

Journal Article · Mon Jul 29 00:00:00 EDT 2024 · International Journal of Ceramic Engineering & Science

DOI:https://doi.org/10.1002/ces2.10230· OSTI ID:2406983

^[1]; ^[1]; Elliott, Amy M. ^[1]; Aguirre, Trevor G. ^[1]; Yoon, Bola ^[2]; Fricke, Brian A. ^[1]; Rao, Vivek ^[1]; Jain, Prashant ^[1]; Nawaz, Kashif ^[1]

Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Saint‐Gobain Research North America, Northborough, MA (United States)

Many energy systems demand heat transfer at high temperatures to keep up with high demand for power, so high-temperature material that can perform and last under these harsh conditions is needed for heat exchangers. The engineering requirements for these high-temperature heat exchanger material call for high thermal conductivity, high resistance to fracture, high resistance to creep deformation, environmental stability in environments associated with the application, and high modulus of elasticity while maintaining low cost to make and maintain. Naturally, ceramics are a good solution for this endeavor. In the past, high-temperature heat exchangers made from ceramics have been used. We provide examples of ceramics in relevant heat exchange applications and provide motivation where additive manufacturing (AM) can improve efficiency. AM for the relevant material is under development, and we provide insight on the AM of ceramic materials and examples of AM heat exchangers keeping cost in mind. The motivation of the review paper is to provide a framework for material and manufacturing selection for high-temperature heat exchangers for AM to keep up with the demand for better efficiency, better material, better manufacturing, and cost moving forward with AM technology in high-temperature ceramic heat exchangers.

View Journal Article

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E)

Grant/Contract Number:: AC05-00OR22725; AR0000958

OSTI ID:: 2406983

Alternate ID(s):: OSTI ID: 2434376; OSTI ID: 2477705

Journal Information:: International Journal of Ceramic Engineering & Science, Vol. 6, Issue 5; ISSN 2578-3270

Publisher:: WileyCopyright Statement

Country of Publication:: United States

Language:: English

References (178)

Review of additive manufacturing and densification techniques for the net- and near net-shaping of geometrically complex silicon nitride components Aguirre, Trevor G.; Cramer, Corson L.; Mitchell, David J. Journal of the European Ceramic Society, Vol. 42, Issue 3 https://doi.org/10.1016/j.jeurceramsoc.2021.11.001	journal	March 2022
Metal hydride hydrogen and heat storage systems as enabling technology for spacecraft applications Reissner, Alexander; Pawelke, Roland H.; Hummel, Stefan Journal of Alloys and Compounds, Vol. 645 https://doi.org/10.1016/j.jallcom.2015.03.130	journal	October 2015
Effect of SiC powder on the properties of SiC slurry for stereolithography Hu, Chuanqi; Chen, Yufeng; Yang, Taisheng Ceramics International, Vol. 47, Issue 9 https://doi.org/10.1016/j.ceramint.2021.01.101	journal	May 2021
3D printing of porous SiC ceramics added with SiO2 hollow microspheres Sun, Xiaomei; Zeng, Tao; Zhou, Yikai Ceramics International, Vol. 46, Issue 14 https://doi.org/10.1016/j.ceramint.2020.06.047	journal	October 2020
Stabilizing Highly Loaded Silicon Nitride Aqueous Suspensions Using Comb Polymer Concrete Superplasticizers Rueschhoff, Lisa M.; Youngblood, Jeffrey P.; Trice, Rodney W. Journal of the American Ceramic Society, Vol. 99, Issue 12 https://doi.org/10.1111/jace.14432	journal	August 2016
Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants Sani, Elisa; Mercatelli, Luca; Sansoni, Paola Journal of Renewable and Sustainable Energy, Vol. 4, Issue 3 https://doi.org/10.1063/1.4717515	journal	May 2012
Performance optimization of complicated structural SiC/Si composite ceramics prepared by selective laser sintering Song, Suocheng; Gao, Zongqiang; Lu, Bingheng Ceramics International, Vol. 46, Issue 1 https://doi.org/10.1016/j.ceramint.2019.09.004	journal	January 2020
Carbon-Carbon Recuperators in Closed-Brayton-Cycle Space Power Systems. Barrett, Michael J.; Johnson, Paul K. Journal of Propulsion and Power, Vol. 24, Issue 3 https://doi.org/10.2514/1.26756	journal	May 2008
Robocasting of reaction bonded silicon carbide structures Wahl, Larissa; Lorenz, Mylena; Biggemann, Jonas Journal of the European Ceramic Society, Vol. 39, Issue 15 https://doi.org/10.1016/j.jeurceramsoc.2019.06.049	journal	December 2019
Development of a Ceramic Micro Heat Exchanger – Design, Construction, and Testing Alm, B.; Knitter, R.; Haußelt, J. Chemical Engineering & Technology, Vol. 28, Issue 12 https://doi.org/10.1002/ceat.200500253	journal	November 2005
Compact Carbon-Carbon Composite Heat Exchanger Alam, M. Khairul; Watts, Roland J.; Price, John Heat Transfer, Volume 4 https://doi.org/10.1115/IMECE2002-32094	conference	January 2002
Characterization of Porous Carbon Foam as a Material for Compact Recuperators Straatman, A. G.; Gallego, N. C.; Yu, Q. Journal of Engineering for Gas Turbines and Power, Vol. 129, Issue 2 https://doi.org/10.1115/1.2436562	journal	June 2006
Development of Shell-and-Tube Type Ceramic Heat Exchanger for CGT301 Yoshimura, Yukihiro; Itoh, Katsunori; Ohhori, Kunio Volume 2: Aircraft Engine; Marine; Microturbines and Small Turbomachinery https://doi.org/10.1115/95-GT-208	conference	June 1995
Integrated hollow porous ceramic cuboids-finned heat pipes evaporative cooling system: Numerical modelling and experimental validation Alharbi, Abdulrahman; Almaneea, Abdulmajeed; Boukhanouf, Rabah Energy and Buildings, Vol. 196 https://doi.org/10.1016/j.enbuild.2019.05.012	journal	August 2019
Evaluation of shielding performance for newly developed composite materials Evans, Beren R.; Lian, Jie; Ji, Wei Annals of Nuclear Energy, Vol. 116 https://doi.org/10.1016/j.anucene.2018.01.022	journal	June 2018
A new concept composite heat exchanger to be applied in high-temperature industrial processes Luzzatto, C.; Morgana, A.; Chaudourne, S. Applied Thermal Engineering, Vol. 17, Issue 8-10 https://doi.org/10.1016/S1359-4311(96)00060-9	journal	August 1997
One piece ceramic heat exchanger for concentrating solar power electric plants Singh, Dileep; Yu, Wenhua; France, David M. Renewable Energy, Vol. 160 https://doi.org/10.1016/j.renene.2020.07.070	journal	November 2020
Direct fabrication mechanism of pre-sintered Si3N4 ceramic with ultra-high porosity by laser additive manufacturing Wei, Zheng-Hua; Cheng, Li-Jin; Ma, Yi-Xin Scripta Materialia, Vol. 173 https://doi.org/10.1016/j.scriptamat.2019.07.046	journal	December 2019
Dense and near-net-shape fabrication of Si3N4 ceramics Bocanegra-Bernal, M. H.; Matovic, B. Materials Science and Engineering: A, Vol. 500, Issue 1-2 https://doi.org/10.1016/j.msea.2008.09.015	journal	January 2009
Silicon Nitride Materials for Gas Turbine Components Caws, R. B.; Graham, R. P.; Stoddart, D. E. ASME 1973 International Gas Turbine Conference and Products Show https://doi.org/10.1115/73-GT-47	conference	April 1973
Additive Manufacturing for Cost Efficient Production of Compact Ceramic Heat Exchangers and Recuperators Shulman, Holly; Ross, Nicole https://doi.org/10.2172/1234436	report	October 2015
Fabrication of functionally graded reaction infiltrated SiC–Si composite by three-dimensional printing (3DP™) process Moon, Jooho; Caballero, Amador C.; Hozer, Leszek Materials Science and Engineering: A, Vol. 298, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)01282-X	journal	January 2001
Material extrusion of highly-loaded silicon nitride aqueous inks for solid infilled structures Costakis, William J.; Wyckoff, Connor; Schlup, Andrew Additive Manufacturing, Vol. 64 https://doi.org/10.1016/j.addma.2023.103425	journal	February 2023
Tailoring optical properties of surfaces in wide spectral ranges by multi-scale femtosecond-laser texturing: A case-study for TaB2 ceramics Sani, Elisa; Sciti, Diletta; Silvestroni, Laura Optical Materials, Vol. 109 https://doi.org/10.1016/j.optmat.2020.110347	journal	November 2020
Ceramic Heat Pipes for High Temperature Application Hack, Nina; Unz, Simon; Beckmann, Michael Energy Procedia, Vol. 120 https://doi.org/10.1016/j.egypro.2017.07.147	journal	August 2017
Ceramic 3D Printed Direct Winding Heat Exchangers for Improving Electric Machine Thermal Management Sixel, William; Liu, Mingda; Nellis, Gregory 2019 IEEE Energy Conversion Congress and Exposition (ECCE) https://doi.org/10.1109/ECCE.2019.8913234	conference	September 2019
The Role of the Ceramic Heat Exchanger in Energy and Resource Conservation McDonald, C. F. Journal of Engineering for Power, Vol. 102, Issue 2 https://doi.org/10.1115/1.3230253	journal	April 1980
Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant Liu, Yao; Cheng, Lijin; Li, Hao Ceramics International, Vol. 46, Issue 10 https://doi.org/10.1016/j.ceramint.2020.02.258	journal	July 2020
Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST) Cramer, Corson L.; McMurray, Jacob W.; Lance, Michael J. Journal of the European Ceramic Society, Vol. 40, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2019.11.061	journal	April 2020
Development and analysis of a high refractive index liquid phase Si3N4 slurry for mask stereolithography Wu, Xiangquan; Xu, Chunjie; Zhang, Zhongming Ceramics International, Vol. 48, Issue 1 https://doi.org/10.1016/j.ceramint.2021.09.087	journal	January 2022
A high-performance lung-inspired ceramic 3D-printed heat exchanger for high-temperature energy-efficient systems Ahmadi, Behzad; Cesarano, Joseph; Nawaz, Kashif Applied Thermal Engineering, Vol. 219 https://doi.org/10.1016/j.applthermaleng.2022.119378	journal	January 2023
Digital design and 3D printing of innovative SiC architectures for high temperature volumetric solar receivers Heisel, Cyprien; Caliot, Cyril; Chartier, Thierry Solar Energy Materials and Solar Cells, Vol. 232 https://doi.org/10.1016/j.solmat.2021.111336	journal	October 2021
Theoretical investigation of a ceramic monolith heat exchanger using silicon carbide and aluminium nitride as heat exchanger material Arunachalam, Umayorupagam; Edwin, Mohan International Journal of Heat and Technology, Vol. 35, Issue 3 https://doi.org/10.18280/ijht.350323	journal	September 2017
Sintered Silicon Carbide composites deposited on zirconium alloy substrates in air and Ar atmosphere – Part I: Evaluation of scratch adhesion and tribology properties Afornu, B. K.; Lider, A. M.; Ismail, O. A. Materials Letters, Vol. 306 https://doi.org/10.1016/j.matlet.2021.130963	journal	January 2022
Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer Cramer, Corson L.; Armstrong, Herb; Flores‐Betancourt, Alexis International Journal of Ceramic Engineering & Science, Vol. 2, Issue 6 https://doi.org/10.1002/ces2.10070	journal	September 2020
Mechanical Properties of Alumina/Silicon Carbide Whisker Composites Lio, Satoshi; Watanabe, Masakazu; Matsubara, Masaru Journal of the American Ceramic Society, Vol. 72, Issue 10 https://doi.org/10.1111/j.1151-2916.1989.tb05995.x	journal	October 1989
Power-Density vs Efficiency Trade-Off for a Recuperated Inside-Out Ceramic Turbine (ICT) Picard, B.; L. -Blais, A.; Picard, M. Volume 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines https://doi.org/10.1115/GT2019-91017	conference	June 2019
Tantalum carbide based spectrally selective coatings for solar thermal absorber applications Kondaiah, P.; Niranjan, K.; John, Siju Solar Energy Materials and Solar Cells, Vol. 198 https://doi.org/10.1016/j.solmat.2019.04.016	journal	August 2019
Stereolithography of SiOC Polymer‐Derived Ceramics Filled with SiC Micronwhiskers Brinckmann, Stephan A.; Patra, Niranjan; Yao, Jia Advanced Engineering Materials, Vol. 20, Issue 11 https://doi.org/10.1002/adem.201800593	journal	September 2018
Properties of SiC‐Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration Cramer, Corson L.; Elliott, Amy M.; Lara‐Curzio, Edgar Journal of the American Ceramic Society, Vol. 104, Issue 11 https://doi.org/10.1111/jace.17933	journal	June 2021
Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites Croom, Brendan P.; Abbott, Andrew; Kemp, James W. Additive Manufacturing, Vol. 37 https://doi.org/10.1016/j.addma.2020.101701	journal	January 2021
A comprehensive review on the current technologies and recent developments in high-temperature heat exchangers Mahmoudinezhad, Sajjad; Sadi, Meisam; Ghiasirad, Hamed Renewable and Sustainable Energy Reviews, Vol. 183 https://doi.org/10.1016/j.rser.2023.113467	journal	September 2023
The design, fabrication, and evaluation of a ceramic counter-flow microchannel heat exchanger Kee, Robert J.; Almand, Berkeley B.; Blasi, Justin M. Applied Thermal Engineering, Vol. 31, Issue 11-12 https://doi.org/10.1016/j.applthermaleng.2011.03.009	journal	August 2011
Study of formation of silicon carbide in the Acheson process Kumar, Potturu V.; Gupta, Govind S. Steel Research, Vol. 73, Issue 2 https://doi.org/10.1002/srin.200200170	journal	February 2002
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model Sachs, E.; Cima, M.; Williams, P. Journal of Engineering for Industry, Vol. 114, Issue 4 https://doi.org/10.1115/1.2900701	journal	January 1992
Enhancing hypervelocity impact resistance of titanium substrate using Ti/SiC Metal Matrix Nanocomposite coating Shojaei, Pouya; Trabia, Mohamed; O'Toole, Brendan Composites Part B: Engineering, Vol. 194 https://doi.org/10.1016/j.compositesb.2020.108068	journal	August 2020
Improving cure performance of Si3N4 suspension with a high refractive index resin for stereolithography-based additive manufacturing Zou, Wenjing; Yang, Ping; Lin, Lifu Ceramics International, Vol. 48, Issue 9 https://doi.org/10.1016/j.ceramint.2022.01.124	journal	May 2022
Fabrication and Joining of Ceramic Compact Heat Exchangers for Process Integration Lewinsohn, Charles A.; Wilson, Merrill A.; Fellows, Joseph R. International Journal of Applied Ceramic Technology, Vol. 9, Issue 4 https://doi.org/10.1111/j.1744-7402.2012.02788.x	journal	July 2012
Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology Zhu, Wei; Fu, Hua; Xu, Zhongfeng Journal of the European Ceramic Society, Vol. 38, Issue 14 https://doi.org/10.1016/j.jeurceramsoc.2018.06.022	journal	November 2018
Hard coatings based on thermal spray and laser cladding Khanna, A. S.; Kumari, S.; Kanungo, S. International Journal of Refractory Metals and Hard Materials, Vol. 27, Issue 2 https://doi.org/10.1016/j.ijrmhm.2008.09.017	journal	March 2009
Thermodynamic study of an EFGT (externally fired gas turbine) cycle with one detailed model for the ceramic heat exchanger de Mello, Paulo Eduardo Batista; Monteiro, Deiglys Borges Energy, Vol. 45, Issue 1 https://doi.org/10.1016/j.energy.2012.01.003	journal	September 2012
Experimental study of multi-hole cooling for integrally-woven, ceramic matrix composite walls for gas turbine applications Zhong, Fengquan; Brown, Garry L. International Journal of Heat and Mass Transfer, Vol. 52, Issue 3-4 https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.008	journal	January 2009
Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing Lu, Zhongliang; Xia, Yuanlin; Miao, Kai Ceramics International, Vol. 45, Issue 14 https://doi.org/10.1016/j.ceramint.2019.05.283	journal	October 2019
Experimental investigation on thermal conductivity and viscosity of aluminum nitride nanofluid Yu, Wei; Xie, Huaqing; Li, Yang Particuology, Vol. 9, Issue 2 https://doi.org/10.1016/j.partic.2010.05.014	journal	April 2011
Air vent in water chamber and surface coating on liner slides concerning auxiliary cooling system for the high temperature engineering test reactor Takeda, Takeshi; Kunitomi, Kazuhiko; Ohkubo, Minoru Nuclear Engineering and Design, Vol. 185, Issue 2-3 https://doi.org/10.1016/S0029-5493(98)00287-8	journal	October 1998
Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting Cai, Kunpeng; Román-Manso, Benito; Smay, Jim E. Journal of the American Ceramic Society, Vol. 95, Issue 8 https://doi.org/10.1111/j.1551-2916.2012.05276.x	journal	June 2012
Measurement and analysis of soot inception limits of oxygen-enriched coflow flames Kumfer, B. M.; Skeen, S. A.; Chen, R. Combustion and Flame, Vol. 147, Issue 3 https://doi.org/10.1016/j.combustflame.2006.08.004	journal	November 2006
Development of a zirconia-mullite based ceramic for recuperator applications. DOE/ORNL Ceramic Technology Project Gonzalez, J. M. https://doi.org/10.2172/10160653	report	December 1992
Optical properties of ZrB2 porous architectures Sani, Elisa; Landi, Elena; Sciti, Diletta Solar Energy Materials and Solar Cells, Vol. 144 https://doi.org/10.1016/j.solmat.2015.09.068	journal	January 2016
Heat exchanger development at Reaction Engines Ltd. Varvill, Richard Acta Astronautica, Vol. 66, Issue 9-10 https://doi.org/10.1016/j.actaastro.2009.11.010	journal	May 2010
A review of additive manufacturing of ceramics by powder bed selective laser processing (sintering / melting): Calcium phosphate, silicon carbide, zirconia, alumina, and their composites Grossin, David; Montón, Alejandro; Navarrete-Segado, Pedro Open Ceramics, Vol. 5 https://doi.org/10.1016/j.oceram.2021.100073	journal	March 2021
Description and experimental results of a semi-indirect ceramic evaporative cooler Velasco Gómez, E.; Rey Martínez, F. J.; Varela Diez, F. International Journal of Refrigeration, Vol. 28, Issue 5 https://doi.org/10.1016/j.ijrefrig.2005.01.004	journal	August 2005
Highly Compact Ceramic Recuperator for Engine Applications Kleiner, R. N.; Strasbaugh, L. R.; Coubrough, L. E. Volume 5: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; Process Industries; Technology Resources https://doi.org/10.1115/84-GT-50	conference	June 1984
Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications Sciti, D.; Silvestroni, L.; Trucchi, D. M. Solar Energy Materials and Solar Cells, Vol. 132 https://doi.org/10.1016/j.solmat.2014.09.037	journal	January 2015
Preparation of high-strength Si3N4 antenna window using selective laser sintering Wang, Kejie; Bao, Chonggao; Zhang, Chengyu Ceramics International, Vol. 48, Issue 2 https://doi.org/10.1016/j.ceramint.2021.09.307	journal	January 2022
Fabrication of silicon carbide fiber-reinforced silicon carbide composite by hot-pressing Yano, T.; Budiyanto, K.; Yoshida, K. Fusion Engineering and Design, Vol. 41, Issue 1-4 https://doi.org/10.1016/S0920-3796(98)00094-5	journal	September 1998
Fabrication of broadband wave-transparent Si3N4 ceramics with octet-truss lattice structure by vat photopolymerization 3D printing technology Chen, Zihuan; Duan, Wenyan; Zhang, Dongyun Journal of the European Ceramic Society, Vol. 44, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2023.11.035	journal	April 2024
Fabrication of Si3N4–SiC/SiO2 composites using 3D printing and infiltration processing Yu, Siwen; Zeng, Tao; Pan, Xiaotong Ceramics International, Vol. 47, Issue 20 https://doi.org/10.1016/j.ceramint.2021.06.235	journal	October 2021
Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM) Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo Journal of Materials Engineering and Performance, Vol. 27, Issue 1 https://doi.org/10.1007/s11665-017-2843-z	journal	August 2017
State-of-the-art in heat exchanger additive manufacturing Kaur, Inderjot; Singh, Prashant International Journal of Heat and Mass Transfer, Vol. 178 https://doi.org/10.1016/j.ijheatmasstransfer.2021.121600	journal	October 2021
Additive manufacturing and testing of a ceramic heat exchanger for high-temperature and high-pressure applications for concentrating solar power Du, Wenchao; Yu, Wenhua; France, David M. Solar Energy, Vol. 236 https://doi.org/10.1016/j.solener.2022.03.046	journal	April 2022
Digital light processing 3D printing of surface-oxidized Si₃N₄ coated by silane coupling agent Yang, Ping; Sun, Zhenfei; Huang, Shengwu Journal of Asian Ceramic Societies, Vol. 10, Issue 1 https://doi.org/10.1080/21870764.2021.2009096	journal	January 2022
Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing Xia, Yuanlin; Lu, Zhongliang; Cao, Jiwei Scripta Materialia, Vol. 165 https://doi.org/10.1016/j.scriptamat.2019.02.016	journal	May 2019
Titanium diboride ceramics for solar thermal absorbers Sani, Elisa; Meucci, Marco; Mercatelli, Luca Solar Energy Materials and Solar Cells, Vol. 169 https://doi.org/10.1016/j.solmat.2017.05.038	journal	September 2017
Hafnium and tantalum carbides for high temperature solar receivers Sani, Elisa; Mercatelli, Luca; Fontani, Daniela Journal of Renewable and Sustainable Energy, Vol. 3, Issue 6 https://doi.org/10.1063/1.3662099	journal	November 2011
Ultra-refractory ceramics for high-temperature solar absorbers Sani, E.; Mercatelli, L.; Francini, F. Scripta Materialia, Vol. 65, Issue 9 https://doi.org/10.1016/j.scriptamat.2011.07.033	journal	November 2011
Binder jet additive manufacturing of ceramic heat exchangers for concentrating solar power applications with thermal energy storage in molten chlorides Kelly, J. P.; Finkenauer, L. R.; Roy, P. Additive Manufacturing, Vol. 56 https://doi.org/10.1016/j.addma.2022.102937	journal	August 2022
High temperature heat exchangers and microscale combustion systems: applications to thermal system miniaturization Ohadi, Michael M.; Buckley, Steven G. Experimental Thermal and Fluid Science, Vol. 25, Issue 5 https://doi.org/10.1016/S0894-1777(01)00069-3	journal	November 2001
Design of a Carbon-Carbon Finned Surface Heat Exchanger for a High-Bypass Ratio, High Speed Gas Turbine Engine Filburn, Tom; Kloter, Amanda; Cloud, Dave Volume 3: Heat Transfer, Parts A and B https://doi.org/10.1115/GT2006-90480	conference	January 2006
The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process Zhang, Heng; Yang, Yong; Liu, Bin Ceramics International, Vol. 45, Issue 8 https://doi.org/10.1016/j.ceramint.2019.02.154	journal	June 2019
Theoretical insight into the solar thermal absorption property of ultra-high temperature ceramics TMB2 (TM = Ti, Zr, and Hf) Xiang, Huimin; Dai, Fuzhi; Zhou, Yanchun Solar Energy Materials and Solar Cells, Vol. 225 https://doi.org/10.1016/j.solmat.2021.111032	journal	June 2021
Direct Ink Writing of Silicon Carbide for Microwave Optics: Direct Ink Writing of Silicon Carbide for Microwave Larson, Chris M.; Choi, Justin J.; Gallardo, Patricio A. Advanced Engineering Materials, Vol. 18, Issue 1 https://doi.org/10.1002/adem.201500298	journal	September 2015
Heat transfer, pressure drop and structural analysis of a finned plate ceramic heat exchanger de Mello, Paulo Eduardo Batista; Villanueva, Helio Henrique Santomo; Scuotto, Sérgio Energy, Vol. 120 https://doi.org/10.1016/j.energy.2016.11.113	journal	February 2017
Direct selective laser sintering and melting of ceramics: a review Sing, Swee Leong; Yeong, Wai Yee; Wiria, Florencia Edith Rapid Prototyping Journal, Vol. 23, Issue 3 https://doi.org/10.1108/RPJ-11-2015-0178	journal	April 2017
Waste Heat Recovery. Technology and Opportunities in U.S. Industry Johnson, Ilona; Choate, William; Davidson, Amber https://doi.org/10.2172/1218716	report	March 2008
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography Zakeri, Setareh; Vippola, Minnamari; Levänen, Erkki Additive Manufacturing, Vol. 35 https://doi.org/10.1016/j.addma.2020.101177	journal	October 2020
Rapid prototyping methods of silicon carbide micro heat exchangers Liu, H-C; Tsuru, H.; Cooper, A. G. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 219, Issue 7 https://doi.org/10.1243/095440505X32463	journal	July 2005
The preparation of SiC ceramic photosensitive slurry for rapid stereolithography Tang, Jie; Guo, Xiaotian; Chang, Haotian Journal of the European Ceramic Society, Vol. 41, Issue 15 https://doi.org/10.1016/j.jeurceramsoc.2021.08.029	journal	December 2021
Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration Cramer, Corson L.; Yoon, Bola; Lance, Michael J. Journal of Composites Science, Vol. 6, Issue 12 https://doi.org/10.3390/jcs6120359	journal	November 2022
High temperature heat exchangers for power plants: Performance of advanced metallic recuperators Aquaro, D.; Pieve, M. Applied Thermal Engineering, Vol. 27, Issue 2-3 https://doi.org/10.1016/j.applthermaleng.2006.07.030	journal	February 2007
Experimental investigation of compact silicon carbide heat exchangers for high temperatures Fend, Thomas; Völker, Wilhelm; Miebach, Rolf International Journal of Heat and Mass Transfer, Vol. 54, Issue 19-20 https://doi.org/10.1016/j.ijheatmasstransfer.2011.05.028	journal	September 2011
Toward extreme high-temperature supercritical CO2 power cycles: Leakage characterization of ceramic 3D-printed heat exchangers Bayaniahangar, Rasoul; Okoh, Ikechukwu; Nawaz, Kashif Additive Manufacturing, Vol. 54 https://doi.org/10.1016/j.addma.2022.102783	journal	June 2022
Stereolithography additive manufacturing and sintering approaches of SiC ceramics Bai, Xuejian; Ding, Guojiao; Zhang, Keqiang Open Ceramics, Vol. 5 https://doi.org/10.1016/j.oceram.2020.100046	journal	March 2021
Acheson Process Guichelaar, Philip J. Carbide, Nitride and Boride Materials Synthesis and Processing, p. 115-129 https://doi.org/10.1007/978-94-009-0071-4_4	book	January 1997
Rheology and Curability Characterization of Photosensitive Slurries for 3D Printing of Si3N4 Ceramics Li, Xingbang; Zhang, Jingxian; Duan, Yusen Applied Sciences, Vol. 10, Issue 18 https://doi.org/10.3390/app10186438	journal	September 2020
Additive manufacturing of continuous carbon fiber-reinforced SiC ceramic composite with multiple fiber bundles by an extrusion-based technique Chen, Ruoyu; Bratten, Adam; Rittenhouse, Joshua Ceramics International, Vol. 49, Issue 6 https://doi.org/10.1016/j.ceramint.2022.11.157	journal	March 2023
Influence of Operation Conditions and Ambient Temperature on Performance of Gas Turbine Power Plant Rahman, M. M.; Ibrahim, Thamir K.; Kadirgama, K. Advanced Materials Research, Vol. 189-193 https://doi.org/10.4028/www.scientific.net/AMR.189-193.3007	journal	February 2011
Additive manufacturing of silicon carbide for nuclear applications Koyanagi, Takaaki; Terrani, Kurt; Harrison, Shay Journal of Nuclear Materials, Vol. 543 https://doi.org/10.1016/j.jnucmat.2020.152577	journal	January 2021
Study of Porous Ceramic Based on Silicon Nitride Prepared Using Three-Dimensional Printing Technology Rabinskii, L. N.; Ripetskii, A. V.; Pogodin, V. A. Refractories and Industrial Ceramics, Vol. 57, Issue 6 https://doi.org/10.1007/s11148-017-0030-2	journal	March 2017
Optical properties of dense zirconium and tantalum diborides for solar thermal absorbers Sani, Elisa; Mercatelli, Luca; Meucci, Marco Renewable Energy, Vol. 91 https://doi.org/10.1016/j.renene.2016.01.068	journal	June 2016
Future directions in ceramic additive manufacturing: Fiber reinforcements and artificial intelligence Rueschhoff, Lisa M.; Baldwin, Luke A.; Hardin, James O. Journal of the American Ceramic Society, Vol. 107, Issue 3 https://doi.org/10.1111/jace.19408	journal	September 2023
Modern Ceramic Engineering: Properties, Processing, and Use in Design Richerson, David W. https://doi.org/10.1201/b18952	book	November 2005
Design of a 2 MW ZrC/W-based molten-salt-to-sCO2 PCHE for concentrated solar power Zhu, Qingzi; Tan, Xu; Barari, Bamdad Applied Energy, Vol. 300 https://doi.org/10.1016/j.apenergy.2021.117313	journal	October 2021
Stereolithography of SiOC Ceramic Microcomponents Zanchetta, Erika; Cattaldo, Marco; Franchin, Giorgia Advanced Materials, Vol. 28, Issue 2 https://doi.org/10.1002/adma.201503470	journal	November 2015
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities Zocca, Andrea; Colombo, Paolo; Gomes, Cynthia M. Journal of the American Ceramic Society, Vol. 98, Issue 7 https://doi.org/10.1111/jace.13700	journal	July 2015
Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror Ding, Guojiao; He, Rujie; Zhang, Keqiang Ceramics International, Vol. 46, Issue 11 https://doi.org/10.1016/j.ceramint.2020.04.196	journal	August 2020
Dispersion and stability of SiC ceramic slurry for stereolithography Ding, Guojiao; He, Rujie; Zhang, Keqiang Ceramics International, Vol. 46, Issue 4 https://doi.org/10.1016/j.ceramint.2019.10.203	journal	March 2020
Direct ink writing of water-based C–SiC pastes for the manufacturing of SiSiC components Held, Alexander; Puchas, Georg; Müller, Ferdinand Open Ceramics, Vol. 5 https://doi.org/10.1016/j.oceram.2020.100054	journal	March 2021
Advanced alloys for compact, high-efficiency, high-temperature heat-exchangers Maziasz, P.; Pint, B.; Shingledecker, J. International Journal of Hydrogen Energy, Vol. 32, Issue 16 https://doi.org/10.1016/j.ijhydene.2006.08.018	journal	November 2007
High-temperature corrosion of recuperators used in steel mills Seong, Byeong Geun; Hwang, Soon Young; Kim, Kyoo Young Surface and Coatings Technology, Vol. 126, Issue 2-3 https://doi.org/10.1016/S0257-8972(00)00523-5	journal	April 2000
Synthesis of ultrafine silicon nitride powders Orthner, H. R.; Brink, R.; Roth, P. International Journal of Materials and Product Technology, Vol. 15, Issue 6 https://doi.org/10.1504/IJMPT.2000.001261	journal	January 2000
3D printing of ceramics: A review Chen, Zhangwei; Li, Ziyong; Li, Junjie Journal of the European Ceramic Society, Vol. 39, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2018.11.013	journal	April 2019
Stereolithographic additive manufacturing diamond/SiC composites with high thermal conductivity for electronic 3D-packaging applications Chen, Ruiguang; Lian, Qin; Li, Dichen Ceramics International, Vol. 47, Issue 10 https://doi.org/10.1016/j.ceramint.2021.01.270	journal	May 2021
Ceramic Plate Heat Exchanger for Heterogeneous Gas Phase Reactions Schmitt, C.; Agar, D. W.; Platte, F. Chemical Engineering & Technology, Vol. 28, Issue 3 https://doi.org/10.1002/ceat.200407119	journal	March 2005
Industrial applications for LIGA-fabricated micro heat exchangers Kelly, Kevin W.; Harris, Chad; Stephens, Lyndon S. MEMS Components and Applications for Industry, Automobiles, Aerospace, and Communication https://doi.org/10.1117/12.443021	conference	October 2001
Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis Pelanconi, Marco; Colombo, Paolo; Ortona, Alberto Journal of the European Ceramic Society, Vol. 41, Issue 10 https://doi.org/10.1016/j.jeurceramsoc.2021.04.014	journal	August 2021
Rapid manufacturing of silicon carbide composites Evans, R. S.; Bourell, D. L.; Beaman, J. J. Rapid Prototyping Journal, Vol. 11, Issue 1 https://doi.org/10.1108/13552540510573374	journal	February 2005
Design and manufacture of ceramic heat pipes for high temperature applications Meisel, Peter; Jobst, Matthias; Lippmann, Wolfgang Applied Thermal Engineering, Vol. 75 https://doi.org/10.1016/j.applthermaleng.2014.10.051	journal	January 2015
Additive manufacturing of ceramic materials for energy applications: Road map and opportunities Cramer, Corson L.; Ionescu, Emanuel; Graczyk-Zajac, Magdalena Journal of the European Ceramic Society, Vol. 42, Issue 7 https://doi.org/10.1016/j.jeurceramsoc.2022.01.058	journal	July 2022
3D printing of high‐purity silicon carbide Terrani, Kurt; Jolly, Brian; Trammell, Michael Journal of the American Ceramic Society, Vol. 103, Issue 3 https://doi.org/10.1111/jace.16888	journal	October 2019
Microstructure and properties of silicon nitride ceramics fabricated by vat photopolymerization in combination with pressureless sintering Wang, Li; Wang, Luyan; Hao, Zongdong Ceramics International https://doi.org/10.1016/j.ceramint.2023.12.361	journal	December 2023
Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration Wang, Wenqing; Bai, Xuejian; Zhang, Lu Ceramics International, Vol. 48, Issue 3 https://doi.org/10.1016/j.ceramint.2021.10.176	journal	February 2022
Design of a Ceramic Heat Exchanger for Sulfuric Acid Decomposition Wilson, Merrill A.; Lewinsohn, Charles; Cutts, James Heat Transfer, Volume 1 https://doi.org/10.1115/IMECE2006-16044	conference	January 2006
Design and Development of a Low-Cost, High Temperature Silicon Carbide Micro-Channel Recuperator Wilson, Merrill A.; Recknagle, Kurt; Brooks, Kriston Volume 1: Turbo Expo 2005 https://doi.org/10.1115/GT2005-69143	conference	January 2005
The influence of oxygen in TiAlOxNy on the optical properties of colored solar-absorbing coatings Zhu, Dechun; Mao, Fang; Zhao, Shuxi Solar Energy Materials and Solar Cells, Vol. 98 https://doi.org/10.1016/j.solmat.2011.11.001	journal	March 2012
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure Cappi, B.; Özkol, E.; Ebert, J. Journal of the European Ceramic Society, Vol. 28, Issue 13 https://doi.org/10.1016/j.jeurceramsoc.2008.03.004	journal	September 2008
Heat Exchangers for Fuel Cell and Hybrid System Applications Magistri, L.; Traverso, A.; Massardo, A. F. Journal of Fuel Cell Science and Technology, Vol. 3, Issue 2 https://doi.org/10.1115/1.2173665	journal	October 2005
Fabrication and properties of Si2N2O-Si3N4 ceramics via direct ink writing and low-temperature sintering Jiang, Qiao; Yang, Daoyuan; Yuan, Huiyu Ceramics International, Vol. 48, Issue 1 https://doi.org/10.1016/j.ceramint.2021.08.088	journal	January 2022
Heat transfer in SiC compact heat exchanger Takeuchi, Y.; Park, C.; Noborio, K. Fusion Engineering and Design, Vol. 85, Issue 7-9 https://doi.org/10.1016/j.fusengdes.2010.03.017	journal	December 2010
Carbon Foam: New Generation of Enhanced Surface Compact Recuperators for Gas Turbines Yu, Q.; Thompson, B. E.; Straatman, A. G. ASME Turbo Expo 2005: Power for Land, Sea, and Air, Volume 1: Turbo Expo 2005 https://doi.org/10.1115/GT2005-69007	conference	November 2008
Testing and simulation of ceramic micro heat exchangers Alm, B.; Imke, U.; Knitter, R. Chemical Engineering Journal, Vol. 135 https://doi.org/10.1016/j.cej.2007.07.005	journal	January 2008
Ceramic high temperature plate fin heat exchanger: Experimental investigation under high temperatures and pressures Haunstetter, Jürgen; Dreißigacker, Volker; Zunft, Stefan Applied Thermal Engineering, Vol. 151 https://doi.org/10.1016/j.applthermaleng.2019.02.015	journal	March 2019
Powder Processing, Rheology, and Mechanical Properties of Feedstock for Fused Deposition of Si₃N₄ Ceramics Rangarajan, Sriram; Qi, Gang; Venkataraman, Natesan Journal of the American Ceramic Society, Vol. 83, Issue 7 https://doi.org/10.1111/j.1151-2916.2000.tb01446.x	journal	July 2000
High strength aligned SiC nanowire reinforced SiC porous ceramics fabricated by 3D printing and chemical vapor infiltration Zhu, Quan; Dong, Xiang; Hu, Jianbao Ceramics International, Vol. 46, Issue 5 https://doi.org/10.1016/j.ceramint.2019.11.113	journal	April 2020
Impact of a Ceramic Microchannel Heat Exchanger on a Micro Turbine Carman, B. G.; Kapat, J. S.; Chow, L. C. Volume 1: Turbo Expo 2002 https://doi.org/10.1115/GT2002-30544	conference	January 2002
Effect of Solids Loading on Slip-Casting Performance of Silicon Carbide Slurries Ferreira, José M. F.; Diz, Henrique M. M. Journal of the American Ceramic Society, Vol. 82, Issue 8 https://doi.org/10.1111/j.1151-2916.1999.tb02031.x	journal	August 1999
Direct ink writing of ZrB2-SiC chopped fiber ceramic composites Kemp, James W.; Diaz, Abel A.; Malek, Elizabeth C. Additive Manufacturing, Vol. 44 https://doi.org/10.1016/j.addma.2021.102049	journal	August 2021
Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering Liu, Yao; Zhan, Lina; He, Yu Ceramics International, Vol. 46, Issue 2 https://doi.org/10.1016/j.ceramint.2019.09.186	journal	February 2020
High-Thermal Conductive Coating Used on Metal Heat Exchanger Li, Jing; Liang, Ju; Liu, Yeming Chinese Journal of Chemical Engineering, Vol. 22, Issue 5 https://doi.org/10.1016/S1004-9541(14)60068-9	journal	May 2014
Design Overview of a Three Kilowatt Recuperated Ceramic Turboshaft Engine Vick, Michael J.; Heyes, Andrew; Pullen, Keith Journal of Engineering for Gas Turbines and Power, Vol. 132, Issue 9 https://doi.org/10.1115/1.4000585	journal	June 2010
Chemical Vapor Deposited (CVD) Silicon Carbide Mirror Technology Engdahl, Richard E. SPIE Proceedings https://doi.org/10.1117/12.932998	conference	May 1982
Development of high temperature SiC/SiC composite intermediate heat exchanger for He and LiPb Noborio, K.; Yamamoto, Y.; Takeuchi, Y. 2009 23rd IEEE/NPSS Symposium on Fusion Engineering https://doi.org/10.1109/FUSION.2009.5226504	conference	June 2009
Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method Huang, Rong-Ji; Jiang, Qiang-Guo; Wu, Hai-Dong Ceramics International, Vol. 45, Issue 4 https://doi.org/10.1016/j.ceramint.2018.11.116	journal	March 2019
Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures Mukherji, Debashis; Rösler, Joachim; Strunz, Pavel International Journal of Materials Research, Vol. 102, Issue 9 https://doi.org/10.3139/146.110563	journal	September 2011
Advanced industrial ceramic heat pipe recuperators Strumpf, Hal J.; Stillwagon, Thomas L.; Kotchick, David M. Heat Recovery Systems and CHP, Vol. 8, Issue 3 https://doi.org/10.1016/0890-4332(88)90059-2	journal	January 1988
Development of a Ceramic Heat Exchanger for Application as Solid Oxide Fuel Cell Cathode Air Preheater Córdova, José Luis; Heshmat, Hooshang ASME 2016 Power Conference https://doi.org/10.1115/POWER2016-59333	conference	June 2016
Design and CFD analysis of hair pin heat exchanger using aluminium and titanium carbide nanofluids Abhilash, Pavushetti; Raghupati, Udutha; Nanda Kumar, Raghavan Materials Today: Proceedings, Vol. 39 https://doi.org/10.1016/j.matpr.2020.09.451	journal	January 2021
Additive manufacturing of polymer-derived ceramics Eckel, Z. C.; Zhou, C.; Martin, J. H. Science, Vol. 351, Issue 6268 https://doi.org/10.1126/science.aad2688	journal	December 2015
Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders Polozov, Igor; Razumov, Nikolay; Masaylo, Dmitriy Materials, Vol. 13, Issue 7 https://doi.org/10.3390/ma13071766	journal	April 2020
Tantalum diboride-based ceramics for bulk solar absorbers Sciti, Diletta; Silvestroni, Laura; Sans, Jean-Louis Solar Energy Materials and Solar Cells, Vol. 130 https://doi.org/10.1016/j.solmat.2014.07.012	journal	November 2014
Binder jetting additive manufacturing of silicon carbide ceramics: Development of bimodal powder feedstocks by modeling and experimental methods Du, Wenchao; Singh, Mrityunjay; Singh, Dileep Ceramics International, Vol. 46, Issue 12 https://doi.org/10.1016/j.ceramint.2020.04.098	journal	August 2020
Additive manufacturing of continuous carbon fiber reinforced high entropy ceramic matrix composites via paper laminating, direct slurry writing, and precursor infiltration and pyrolysis Zhang, Lu; Wang, Wenqing; Gao, Xiong Ceramics International, Vol. 49, Issue 5 https://doi.org/10.1016/j.ceramint.2022.10.286	journal	March 2023
Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges Shahzad, Aamir; Lazoglu, Ismail Composites Part B: Engineering, Vol. 225 https://doi.org/10.1016/j.compositesb.2021.109249	journal	November 2021
Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: A numerical study Fattahi, Mehdi; Vaferi, Kourosh; Vajdi, Mohammad Ceramics International, Vol. 46, Issue 8 https://doi.org/10.1016/j.ceramint.2020.01.195	journal	June 2020
Influence of Carbon Content on Ceramic Injection Molding of Reaction-Bonded Silicon Carbide Zhang, Zhao; Zhang, Yujun; Gong, Hongyu International Journal of Applied Ceramic Technology, Vol. 13, Issue 5 https://doi.org/10.1111/ijac.12570	journal	July 2016
A review on application of carbonaceous materials and carbon matrix composites for heat exchangers and heat sinks Wang, Q.; Han, X. H.; Sommers, A. International Journal of Refrigeration, Vol. 35, Issue 1 https://doi.org/10.1016/j.ijrefrig.2011.09.001	journal	January 2012
Polymer‐derived silicon nitride ceramics by digital light processing based additive manufacturing Wang, Min; Xie, Chen; He, Rujie Journal of the American Ceramic Society, Vol. 102, Issue 9 https://doi.org/10.1111/jace.16389	journal	March 2019
Effective Sintering Aids for Silicon Carbide Ceramics: Reactivities of Silicon Carbide with Various Additives Negita, Keishi Journal of the American Ceramic Society, Vol. 69, Issue 12 https://doi.org/10.1111/j.1151-2916.1986.tb07398.x	journal	December 1986
Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems—A review Sommers, A.; Wang, Q.; Han, X. Applied Thermal Engineering, Vol. 30, Issue 11-12 https://doi.org/10.1016/j.applthermaleng.2010.02.018	journal	August 2010
An innovative ceramic high temperature plate-fin heat exchanger for EFCC processes Schulte-Fischedick, Jan; Dreißigacker, Volker; Tamme, Rainer Applied Thermal Engineering, Vol. 27, Issue 8-9 https://doi.org/10.1016/j.applthermaleng.2006.11.007	journal	June 2007
Preparation of thermal barrier coatings for gas turbine blades by EB-PVD Xu, Huibin; Gong, Shengkai; Deng, Liang Thin Solid Films, Vol. 334, Issue 1-2 https://doi.org/10.1016/S0040-6090(98)01124-9	journal	December 1998
Preparation of high porous silicon nitride foams with ultra-thin walls and excellent mechanical performance for heat exchanger application by using a protein foaming method Yin, Liuyan; Zhou, Xingui; Yu, Jinshan Ceramics International, Vol. 42, Issue 1 https://doi.org/10.1016/j.ceramint.2015.09.128	journal	January 2016
Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer Pelanconi, M.; Barbato, M.; Zavattoni, S. Materials & Design, Vol. 163 https://doi.org/10.1016/j.matdes.2018.107539	journal	February 2019
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization Halloran, John W. Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-031841	journal	July 2016
Gelcasting of concentrated aqueous silicon carbide suspension Zhou, Longjie; Huang, Yong; Xie, Zhipeng Journal of the European Ceramic Society, Vol. 20, Issue 1 https://doi.org/10.1016/S0955-2219(99)00138-7	journal	January 2000
Experimental and numerical investigations of nano-additives enhanced paraffin in a shell-and-tube heat exchanger: A comparative study Khan, Zakir; Ahmad Khan, Zulfiqar Applied Thermal Engineering, Vol. 143 https://doi.org/10.1016/j.applthermaleng.2018.07.141	journal	October 2018
Dense, Strong, and Precise Silicon Nitride-Based Ceramic Parts by Lithography-Based Ceramic Manufacturing Altun, Altan Alpay; Prochaska, Thomas; Konegger, Thomas Applied Sciences, Vol. 10, Issue 3 https://doi.org/10.3390/app10030996	journal	February 2020
Properties regulation of SiC ceramics prepared via stereolithography combined with reactive melt infiltration techniques Li, Wei; Cui, Congcong; Bao, Jianxun Ceramics International, Vol. 47, Issue 24 https://doi.org/10.1016/j.ceramint.2021.08.307	journal	December 2021
CerAMfacturing of silicon nitride by using lithography-based ceramic vat photopolymerization (CerAM VPP) Schwarzer-Fischer, Eric; Zschippang, Eveline; Kunz, Willy Journal of the European Ceramic Society, Vol. 43, Issue 2 https://doi.org/10.1016/j.jeurceramsoc.2022.10.011	journal	February 2023
A study of solar thermal absorber stack based on CrAlSiNx/CrAlSiNxOy structure by ion beams AL-Rjoub, A.; Costa, P.; Rebouta, L. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 450 https://doi.org/10.1016/j.nimb.2018.04.024	journal	July 2019
High-Temperature Ceramic Heat Exchanger Element for a Solar Thermal Receiver Strumpf, H. J.; Kotchick, D. M.; Coombs, M. G. Journal of Solar Energy Engineering, Vol. 104, Issue 4 https://doi.org/10.1115/1.3266322	journal	November 1982
Methane steam reforming in a novel ceramic microchannel reactor Murphy, Danielle M.; Manerbino, Anthony; Parker, Margarite International Journal of Hydrogen Energy, Vol. 38, Issue 21 https://doi.org/10.1016/j.ijhydene.2013.05.014	journal	July 2013
Performance Simulation and Thermal Stress Analysis of Ceramic Recuperators formed by SiC and MAS Yang, Chun-Hsiang; Yu, Ming-Ta; Chen, Chiun-Heng Numerical Heat Transfer, Part A: Applications, Vol. 53, Issue 7 https://doi.org/10.1080/10407780701715794	journal	November 2007
Laser additive manufacturing and homogeneous densification of complicated shape SiC ceramic parts Liu, Kai; Wu, Tian; Bourell, David L. Ceramics International, Vol. 44, Issue 17 https://doi.org/10.1016/j.ceramint.2018.08.143	journal	December 2018
Additive Manufacturing of Light Weight Ceramic Matrix Composites For Gas Turbine Engine Applications Singh, Mrityunjay; Halbig, Michael C.; Grady, Joseph E. Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites https://doi.org/10.1002/9781119211662.ch16	book	December 2015
Preparation of silicon carbide slurry for UV curing stereolithography Azuma, Sosuke; Obata, Seizo; Yoshida, Michiyuki Materials Today: Proceedings, Vol. 16 https://doi.org/10.1016/j.matpr.2019.05.289	journal	January 2019
Robocasting of structural ceramic parts with hydrogel inks Feilden, Ezra; Blanca, Esther García-Tuñón; Giuliani, Finn Journal of the European Ceramic Society, Vol. 36, Issue 10 https://doi.org/10.1016/j.jeurceramsoc.2016.03.001	journal	August 2016
Thermal Barrier Coatings for Gas-Turbine Engine Applications Padture, N. P. Science, Vol. 296, Issue 5566 https://doi.org/10.1126/science.1068609	journal	April 2002

Similar Records

Polymer Derived Ceramic Materials and Processes for Joining of Nuclear-Grade SiC-SiC

Technical Report · Mon Dec 02 00:00:00 EST 2019 · OSTI ID:1576593

Lubbers, Jon; Liu, Yiping; Trentler, Tim; +3 more

Related Subjects

36 MATERIALS SCIENCE
additive manufacturing
ceramic heat exchanger
high-temperature heat exchange
silicon carbide

Material selection and manufacturing for high-temperature heat exchangers: Review of state-of-the-art development, opportunities, and challenges

Citation Formats

References (178)

Similar Records

Related Subjects