Exploring the Use of Muon Momentum for Detection of Nuclear Material Within Shielded Spent Nuclear Fuel Dry Casks
- Oak Ridge National Laboratory, One Bethel Valley Road, Oak Ridge, TN 37831 (United States)
- School of Nuclear Engineering, Purdue University, 400 Central Drive, West Lafayette, IN, 47907 (United States)
The inspection of the storage containers that house used nuclear fuel is an important issue facing the nuclear industry; currently, there are limited options available to provide for even minimal inspections. During the long storage life of the fuel, intermediate handling and transportation activities may take place that can create concerns regarding fuel integrity (safety) and continuity of knowledge (safeguards and security). Accidents and natural disasters also contribute to this concern. The reliable and safe management of used nuclear fuel is among the critical tasks to be addressed for the advancement of fission-based nuclear energy in the United States and elsewhere. Since the early 1950's, when the first nuclear power plant began to produce electricity, approximately 65,000 metric tons of used nuclear fuel have been generated in the United States. The postponement of the opening of a permanent repository until 2048 will lead to increased used fuel accumulation at reactor sites. A rapid increase in storage installations with more than 9,000 casks storing {approx}420,000 assemblies is anticipated by 2050 even if no new nuclear power plants are built. After used nuclear fuel has been placed inside a cask, the cask is sealed, not allowing for visual inspection. Conventional methods, e.g., x-rays, are limited in that they cannot penetrate dense, well-shielded objects. More sophisticated techniques, such as penetrating neutrons or proton radiography, require the use of an expensive accelerator. Efforts by Ziock et al. using neutron and gamma-ray imagers concluded that '...the signatures are deemed insufficient to uniquely identify individual casks of the same type...'. It was found that the gamma-ray and neutron images were dominated by diffusion and thermalization effects resulting from the large amount of shielding. One promising mode of inspection would use cosmic-ray muons. These muons are naturally generated, are able to penetrate dense materials, and are incident from all directions above the horizon. Tomography performed using these muons could potentially provide efficient, inexpensive, remote assessment of used nuclear fuel. However, current muon applications are limited in that they have not included momentum measurement. If momentum measurement could be incorporated, that would represent a big step forward because it would allow more accurate estimation of the muon observables, e.g., scattering variance. This approach has the potential to reconstruct the contents of a cask with improved resolution and identify partial defects, fuel assemblies, and individual fuel rods.
- OSTI ID:
- 23047380
- Journal Information:
- Transactions of the American Nuclear Society, Vol. 116; Conference: 2017 Annual Meeting of the American Nuclear Society, San Francisco, CA (United States), 11-15 Jun 2017; Other Information: Country of input: France; 12 refs.; available from American Nuclear Society - ANS, 555 North Kensington Avenue, La Grange Park, IL 60526 (US); ISSN 0003-018X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Investigation of Imaging Spent Nuclear Fuel Dry Casks using Cosmic Ray Muons
Cosmic Ray Muon Radiography of Spent Fuel in Dry Storage Casks
Related Subjects
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
CASKS
COSMIC RADIATION
FUEL ASSEMBLIES
FUEL INTEGRITY
FUEL RODS
GAMMA RADIATION
MUONS
NEUTRONS
NUCLEAR ENERGY
NUCLEAR INDUSTRY
NUCLEAR POWER PLANTS
PROTON RADIOGRAPHY
RADIATION DETECTION
REACTOR SITES
SPENT FUELS
THERMALIZATION
TOMOGRAPHY
X RADIATION