skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Rapid assessment of wear-resistant tool coatings

Abstract

The operation of a cutting wedge is studied in order to improve coating application on tools. A method of investigating the coating characteristics in plant conditions is outlined. The mechanisms of coating failure in cutting are established. The blunting of tools in the course of operation is analyzed. Coating application is optimized.

Authors:
; ;  [1]
  1. Kazan Federal University, Naberezhnye Chelny Institute (Russian Federation)
Publication Date:
OSTI Identifier:
22779253
Resource Type:
Journal Article
Journal Name:
Russian Engineering Research
Additional Journal Information:
Journal Volume: 37; Journal Issue: 11; Other Information: Copyright (c) 2017 Allerton Press, Inc.; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 1068-798X
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; COATINGS; CUTTING TOOLS; DEFECTS; FAILURES; WEAR RESISTANCE

Citation Formats

Kas’yanov, S. V., Kondrashov, A. G., E-mail: kondrashovag@mail.ru, and Safarov, D. T. Rapid assessment of wear-resistant tool coatings. United States: N. p., 2017. Web. doi:10.3103/S1068798X17110065.
Kas’yanov, S. V., Kondrashov, A. G., E-mail: kondrashovag@mail.ru, & Safarov, D. T. Rapid assessment of wear-resistant tool coatings. United States. doi:10.3103/S1068798X17110065.
Kas’yanov, S. V., Kondrashov, A. G., E-mail: kondrashovag@mail.ru, and Safarov, D. T. Wed . "Rapid assessment of wear-resistant tool coatings". United States. doi:10.3103/S1068798X17110065.
@article{osti_22779253,
title = {Rapid assessment of wear-resistant tool coatings},
author = {Kas’yanov, S. V. and Kondrashov, A. G., E-mail: kondrashovag@mail.ru and Safarov, D. T.},
abstractNote = {The operation of a cutting wedge is studied in order to improve coating application on tools. A method of investigating the coating characteristics in plant conditions is outlined. The mechanisms of coating failure in cutting are established. The blunting of tools in the course of operation is analyzed. Coating application is optimized.},
doi = {10.3103/S1068798X17110065},
journal = {Russian Engineering Research},
issn = {1068-798X},
number = 11,
volume = 37,
place = {United States},
year = {2017},
month = {11}
}