Machining by End Mills with Overlapping Cutter–Workpiece Contacts

doi:https://doi.org/10.3103/S1068798X18090149

Title: Machining by End Mills with Overlapping Cutter–Workpiece Contacts

Full Record
Other Related Research

Abstract

This study addresses the influence of cutting forces and mill deformation on the surface quality obtained in machining. A mathematical model is proposed for calculating the trajectory of mill deformation in the shaped surface. Tests confirm the adequacy of the model.

Authors:

Gubanova, A. A., E-mail: anatoliya81@mail.ru ^[1]

Don State Technical University (Russian Federation)

Publication Date:: 2018-09-15

OSTI Identifier:: 22779041

Resource Type:: Journal Article

Journal Name:: Russian Engineering Research

Additional Journal Information:: Journal Volume: 38; Journal Issue: 9; Other Information: Copyright (c) 2018 Allerton Press, Inc.; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 1068-798X

Country of Publication:: United States

Language:: English

Subject:: 42 ENGINEERING; CUTTING; DEFORMATION; MATHEMATICAL MODELS; SURFACES; TRAJECTORIES

Citation Formats


                    Gubanova, A. A., E-mail: anatoliya81@mail.ru. Machining by End Mills with Overlapping Cutter–Workpiece Contacts.  United States: N. p., 2018. 
        Web.  doi:10.3103/S1068798X18090149.

Copy to clipboard


                    Gubanova, A. A., E-mail: anatoliya81@mail.ru. Machining by End Mills with Overlapping Cutter–Workpiece Contacts.  United States.  https://doi.org/10.3103/S1068798X18090149

Copy to clipboard


                    Gubanova, A. A., E-mail: anatoliya81@mail.ru. Sat .  
        "Machining by End Mills with Overlapping Cutter–Workpiece Contacts".  United States.  https://doi.org/10.3103/S1068798X18090149.

Copy to clipboard


                    
@article{osti_22779041,

  title        = {Machining by End Mills with Overlapping Cutter–Workpiece Contacts},

  author       = {Gubanova, A. A., E-mail: anatoliya81@mail.ru},

  abstractNote = {This study addresses the influence of cutting forces and mill deformation on the surface quality obtained in machining. A mathematical model is proposed for calculating the trajectory of mill deformation in the shaped surface. Tests confirm the adequacy of the model.},

  doi          = {10.3103/S1068798X18090149},

  url          = {https://www.osti.gov/biblio/22779041},
  journal      = {Russian Engineering Research},

  issn         = {1068-798X},

  number       = 9,

  volume       = 38,

  place        = {United States},

  year         = {2018},

  month        = {9}

}

Copy to clipboard

Journal Article:

https://doi.org/10.3103/S1068798X18090149

Other availability

Find in Google Scholar

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Dynamic Influence of Spindle Wobble in a Lathe on the Workpiece Geometry

Journal Article Zakovorotny, V. L., E-mail: vzakovorotny@dstu.edu.ru ; Gvindzhiliya, V. E., E-mail: sinedden@yandex.ru - Russian Engineering Research

The influence of spindle wobble in a lathe on the geometry of the machined surface is not direct. The intermediate stages involve conversion of the wobble to forces and elastic deformations. Together with the elastic deformation, wobble modifies the shaping trajectories, which are mainly responsible for the geometry of the final product. Wobble induces periodic variation in the parameters of the dynamic system. It leads not only to parametric self-excitation but also, in a nonlinear dynamic system, to the formation of various attractive deformational-displacement sets. The present work is devoted to mathematical modeling of the influence of wobble on themore »« less
https://doi.org/10.3103/S1068798X18090307
Influence of Spindle Wobble in Turning on the Workpiece’s Surface Topology

Journal Article Zakovorotny, V. L., E-mail: vzakovorotny@dstu.edu.ru ; Gvindzhiliya, V. E., E-mail: sinedden@yandex.ru - Russian Engineering Research

The shaping trajectory of the cutting tool relative to the workpiece consists of the trajectories of the machine tool’s working components, trajectories unrelated to control of perturbations (including spindle wobble), and deformational-displacement trajectories of the tool and workpiece relative to the supporting system. In the present work, the perturbation considered is wobble, which depends on the precision and state of the machine tool. Spindle wobble in a lathe leads to the formation of various attractive sets associated with deformational displacement of the tool. The result is to change the shaping trajectory. That affects the geometric topology of the machined surface,more »« less
https://doi.org/10.3103/S1068798X18100192
Experimental study of abravise waterjet milling of fiber-reinforced plastics

Conference Hocheng, H ; Tsai, H Y ; Shiue, J J ; ...

Composite materials are ideal for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Currently, linear cutting of composite materials has been increasingly used in industry and milling will be an important technology for wider applications of the materials. Abrasive waterjet is adequate for machining of composite materials thanks to minimum thermal or mechanical stresses induced. The present paper discusses the mining of composite materials by abrasive waterjet. The mechanisms of material removal--deformation wear and cutting wear--are studied first. High volume removal rate as well as tight surface quality tolerance is desired. The major parameters affecting material removal ratemore »« less
Modelling of Tool Wear and Residual Stress during Machining of AISI H13 Tool Steel

Journal Article Outeiro, Jose C ; Pina, Jose C ; Umbrello, Domenico ; ... - AIP Conference Proceedings

Residual stresses can enhance or impair the ability of a component to withstand loading conditions in service (fatigue, creep, stress corrosion cracking, etc.), depending on their nature: compressive or tensile, respectively. This poses enormous problems in structural assembly as this affects the structural integrity of the whole part. In addition, tool wear issues are of critical importance in manufacturing since these affect component quality, tool life and machining cost. Therefore, prediction and control of both tool wear and the residual stresses in machining are absolutely necessary. In this work, a two-dimensional Finite Element model using an implicit Lagrangian formulation withmore »« less
https://doi.org/10.1063/1.2740966
Analyzing the performance of diamond-coated micro end mills.

Journal Article Torres, C D ; Heaney, P J ; Sumant, A V ; ... - Int. J. Machine Tools Manufact.

A method is presented to improve the tool life and cutting performance of 300 {micro}m diameter tungsten carbide (WC) micro end mills by applying thin (<300 nm) fine-grained diamond (FGD) and nanocrystalline diamond (NCD) coatings using the hot-filament chemical vapor deposition (HF-CVD) process. The performance of the diamond-coated tools has been evaluated by comparing their performance in dry slot milling of 6061-T6 aluminum against uncoated WC micro end mills. Tool wear, coating integrity, and chip morphology were characterized using SEM and white light interferometry. The initial test results show a dramatic improvement in the tool integrity (i.e., corners not breakingmore »« less
https://doi.org/10.1016/j.ijmachtools.2009.02.001

Similar Records