skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Research of mechanics of the compact bone microvolume and porous ceramics under uniaxial compression

Abstract

The research results of the mechanics are presented and the effective mechanical characteristics under uniaxial compression of the simulative microvolume of the compact bone are defined subject to the direction of the collagen-mineral fibers, porosity and mineral content. The experimental studies of the mechanics are performed and the effective mechanical characteristics of the produced porous zirconium oxide ceramics are defined. The recommendations are developed on the selection of the ceramic samples designed to replace the fragment of the compact bone of a definite structure and mineral content.

Authors:
; ;  [1];  [2]
  1. Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences (Russian Federation)
  2. (Russian Federation)
Publication Date:
OSTI Identifier:
22496174
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1688; Journal Issue: 1; Conference: NEWOT'2015: 5. international scientific conference on new operational technologies, Tomsk (Russian Federation), 29-30 Sep 2015; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; 60 APPLIED LIFE SCIENCES; CERAMICS; COLLAGEN; COMPRESSION; FIBERS; MINERALS; POROSITY; POROUS MATERIALS; SKELETON; ZIRCONIUM OXIDES

Citation Formats

Kolmakova, T. V., E-mail: kolmakova@ftf.tsu.ru, Buyakova, S. P., E-mail: sbuyakova@ispms.tsc.ru, Kul’kov, S. N., E-mail: kulkov@ms.tsc.ru, and National Research Tomsk State University. Research of mechanics of the compact bone microvolume and porous ceramics under uniaxial compression. United States: N. p., 2015. Web. doi:10.1063/1.4936057.
Kolmakova, T. V., E-mail: kolmakova@ftf.tsu.ru, Buyakova, S. P., E-mail: sbuyakova@ispms.tsc.ru, Kul’kov, S. N., E-mail: kulkov@ms.tsc.ru, & National Research Tomsk State University. Research of mechanics of the compact bone microvolume and porous ceramics under uniaxial compression. United States. doi:10.1063/1.4936057.
Kolmakova, T. V., E-mail: kolmakova@ftf.tsu.ru, Buyakova, S. P., E-mail: sbuyakova@ispms.tsc.ru, Kul’kov, S. N., E-mail: kulkov@ms.tsc.ru, and National Research Tomsk State University. 2015. "Research of mechanics of the compact bone microvolume and porous ceramics under uniaxial compression". United States. doi:10.1063/1.4936057.
@article{osti_22496174,
title = {Research of mechanics of the compact bone microvolume and porous ceramics under uniaxial compression},
author = {Kolmakova, T. V., E-mail: kolmakova@ftf.tsu.ru and Buyakova, S. P., E-mail: sbuyakova@ispms.tsc.ru and Kul’kov, S. N., E-mail: kulkov@ms.tsc.ru and National Research Tomsk State University},
abstractNote = {The research results of the mechanics are presented and the effective mechanical characteristics under uniaxial compression of the simulative microvolume of the compact bone are defined subject to the direction of the collagen-mineral fibers, porosity and mineral content. The experimental studies of the mechanics are performed and the effective mechanical characteristics of the produced porous zirconium oxide ceramics are defined. The recommendations are developed on the selection of the ceramic samples designed to replace the fragment of the compact bone of a definite structure and mineral content.},
doi = {10.1063/1.4936057},
journal = {AIP Conference Proceedings},
number = 1,
volume = 1688,
place = {United States},
year = 2015,
month =
}
  • Transformation plasticity in Mg-PSZ and Y-TZP ceramics is investigated using a novel stress reversal Hopkinson bar technique recently developed at the Univ. of California--San Diego (UCSD) for dynamic recovery experiments. The longitudinal and transverse strains are measured by strain gauges mounted on the specimen. The specimens are loaded until transformation reaches saturation. Reloading of the same specimens to higher stress levels does not reveal additional inelasticity. Cuboid specimens which have been loaded initially to attain transformation saturation are then reloaded in a direction perpendicular to the first loading. The second loading produces additional inelasticity and microcracking, indicating the formation ofmore » transformation texture in each loading under uniaxial compression. Microscopic observations, and the results of ultrasonic and X-ray diffraction measurements, as well as micromechanical modeling of the damage evolution are discussed.« less
  • In Part 1 of this paper, Gurson`s mixed hardening plasticity model with strain and stress-controlled nucleations, was used in large deformation finite element program to study the plastic flow and damage in the uniaxial compression of cylinders under sticking friction. Due to low stress triaxiality at the bulge of the cylinders, it was found that localization may occur before void coalescence. In this paper, necessary conditions of localizations are analyzed for the axial compression of porous cylinders under sticking friction. Shear band type of localization with a normal mode of fracture has been predicted for the majority of the casesmore » studied. Various existing localization conditions and fracture criteria are assessed using the results form the simulation. The maximum shear stress at failure is approximately constant and a constant critical damage can not be found.« less
  • Acoustic emission generated during the uniaxial compression of brittle rocks were counted after band-pass filtering. Throughout the whole process from application of load to failure, the count rate monitored through a low pass window was compared statistically with the monitored through a high passs window. The emission rate monitored through a low pas window increases more rapidly than that monitored through a high pass window as rock approaches failure. Two possible explanations for this effect are (1) generation of larger cracks (or coalescence of cracks into larger sizes) and (2) the relative attenuation of higher-frequency wave components. This finding ismore » consistent with past observations, i.e., the relative number of large-amplitude events increases (i.e., a decrease in b value) as rock approaches failure. We suggest that larger cracks tend to generate events with larger amplitudes and containing lower-frequency components. The frequency characteristics of acoustic emissions are used to characterize the microfracturing processes leading to failure. The beginning of a sequence of acoustic emission activity is discussed in relation to the stress-strain curve and the onset of dilatancy. The present observations may be utilized in understanding structural instability of a region where rockbursts or earthquakes can potentially occur. If a sizable microseismic population is observed through sensors placed near the fault, then a potential exists for predicting major earthquakes.« less
  • In an investigation primarily aimed at characterizing the intrinsic hot workability of metallic materials, a new model called the polar reciprocity model has been developed by the authors. The optimum conditions for the hot working of a material may be obtained from processing maps which are contour maps of an intrinsic workability parameter called {zeta} in temperature-strain rate space. In order to do this, it is necessary to correlate the topographic features in the maps with microscopic phenomena participating in the deformation. Based on a study of several titanium alloys it has been found that basins, valleys and lakes inmore » the {zeta} maps are repositories of good hot workability. It has been observed further that microscopic phenomena involving migration of interfaces are associated with such repositories. From a study of topographic features found in the {zeta} maps of several titanium alloys and their associated microscopic phenomena it has been postulated that the titanium alloy IMI685 (Ti-6Al-5Zr-2Mo-0.3Si) could be exhibiting superplasticity when uniaxially compressed at 1,223--1,273 K and 10{sup {minus}2} to 10{sup {minus}3} s{sup {minus}1}. There have been no earlier reports of superplasticity in this alloy. In this communication experimental evidence is presented to establish that the behavior of IMI685 is indeed superplastic when deformed in compression at 1,223--1,273 K and 10{sup {minus}3} s{sup {minus}1}.« less